【愛德美模型】1⁄35 T34⁄85製作(完整版)

坦克博物館
75粉絲
47 次觀看·2025年9月6日
大家好,我是Hobby Headquarters的Tan
今天我們要開始建造 T-34-85 的 135th Scale Academy
這是一個 Berlin 1945 Edition
裡面有很多的圖案
這些圖案是為了製作所有的牀墊裝甲
讓俄羅斯人把這些裝甲都放在上面
以防止炸彈發射出來
看起來會是一個很不錯的裝甲
下面的裝甲跟 T-34-76 的裝甲很相似
我們在不久前才建造過
但是上面的裝甲和圖案
還有其他的裝甲
會是一個完全不一樣的裝甲
加上我們會在俄羅斯的市場製作
讓我們開始吧
我們要開始建造
這是一個多件的下層牀
但是這個裝甲非常適合
所以你不應該有任何問題
當你把裝甲鋪好
就直接把裝甲鋪在上面
這樣你就不會有任何問題
讓裝甲鋪好
這個裝甲開始建造的時候
我先給你們看一下
這個裝甲的懸吊
裝甲裡面有四個不同的懸吊
因為這個裝甲會放在車內
所以我早就先把懸吊標記好
然後我們就貼上其他的懸吊
這個懸吊很容易貼上
貼在懸吊裡面
每個懸吊都有一個特定的形狀
所以你要注意
當你把這個懸吊貼在車內
你就不會有任何問題
我先讓這個懸吊乾燥一下
然後我再給你們看懸吊
還有一件事
我剛貼上另一邊的懸吊
而且還滿濕的
所以你要先把懸吊貼上
然後把懸吊貼上
這樣我們就可以有一個很平的形狀
所以當這個懸吊貼上
然後讓它乾燥一會
你就會有一個很直的孔
所以你就不會有任何問題
或者有任何的曲折
然後當這個懸吊貼乾燥了
就把你個人的懸吊貼放在這裡
你可以按照他們的簡單指示
A A B A放在一邊
然後C D C C放在另一邊
這樣你就會有一個正確的懸吊貼
你不會撞到懸吊貼
在你正在做下半部分
懸吊貼的框架
是依照這個懸吊貼的尺寸
也就是說你必須把它們分開
因為一邊是專門設計
另一邊是專門設計的
當懸吊貼安裝好
安裝得很順利
你就可以把懸吊貼放在後面
一個很酷的小細節
是Academy加入的
就是這個小踏板
這是一個很有趣的故事
在俄羅斯的武器
俄羅斯武器的踏板
把踏板綁在一起
沒有一個連接點在踏板的外側
所以會發生的是
踏板的內側有一個連接點
當踏板運作
踏板就會開始往外走
當踏板旋轉
踏板會撞到踏板的踏板
因為踏板的角度
會把踏板撞進踏板
把踏板維持在正確的位置
這是為了讓俄羅斯的船員
可以輕易把踏板拉出來
沒有外側的連接點
在前面
你可以把踏板完全拉出來
把踏板分開
這樣一把刀
可以輕易把踏板拉出來
在俄羅斯的船上
很容易
我會給你們看一個快速
簡單的方法
把連接點和踏板綁在一起
這是連接點的部分
這是最長的部分
我已經計算好
八個連接點
我們需要綁在車的前面
我認為很簡單
我們把外側的連接點
綁在一起
你可以直接
把連接點綁在一起
像這樣
然後
把每一個連接點
綁在一起
把連接點
在線上
然後你看
旋轉 booty
很快的
你需要讓它綁住
大概五分鐘
And that way, you'll get them to be nice and soft, but they won't fall apart because they'll be glued hard enough
And then I'll come back in a few seconds and show you what it's like
OK, we've let the track set up for probably about four or five minutes now
I was testing as we went, so we'll just put our long length piece of track up on top
We're going to drop our bottom piece in here
And then just slowly and carefully grab your set of tracks
And wrap them around to meet up with the top
Put a little bit of glue onto the connection point
And you want to let that set up for a few seconds before you kick this part over to get the straight part of the track coming down
That way you don't put too much pressure on over here
And once we let this set up for a few more seconds, we'll go along and put a little bit of glue on the inside of the wheel to attach it all together so it stays nice and sturdy
I got a little bit of fuzz on here from something else here
And you'll do the same thing with the back set of tracks as well
One other quick building tip I almost forgot to mention
Is when you're going to do these individual tracks like this
To leave the return roller on the back here loose
That way you can get the teeth to line up inside the sprockets inside
Because if not, it won't line up perfectly
So I never glued those actually into place
We just placed them in there
And we'll do the final bit of sanding on the outside edge
I just noticed I forgot to do that
But yeah, don't glue that down
That'll make it a lot, lot easier on you putting the back part of the track on
So we let this side of the track completely dry
It's set up
We have a nice mild sag which came naturally with the preformed track
Had no problems getting all the track all the way around
Just put a little extra glue on the drive sprocket and the return idler
And you're good to go
Also put a tiny bit on the bottoms of the wheels themselves
Just to keep everything nice and stiff
And we've done both sides of the track
So we're ready now to go on to the upper hull
With the lower portion of the hull completed
We can start adding all of the upper hull parts on
And they're pretty straightforward
From all the different vents, hatches, things like that
Now they do give you two options for the rear
And we're going to choose the one that actually puts the photo etch inside of it
I think that looks a lot better
Because once you put these louvers in
You'll be able to see through the photo etch into the louvers
And it just makes it look a little nicer
And you can put those either open or closed
And once we put a little glue on them
We will flex them in the open position like that
So I'm just going to go through
And just put all of the extra little parts on
On the top right now from the tow hooks, horn, all things like that
But we finished up the lower hull
We put all the grab handles on
I did leave the extra track and the tools off for now
I think it'll just be easier to paint those and put those on separately
We also put the photo etch grill on the back here
Now most of all this is going to get covered with more photo etch
That you'll watch me do in a few minutes here
The tracks are all ready to go
I had to put a little bit of filler in the front
And a tiny bit on the back
Which I'm still in the process of sanding
But it was minor stuff
I just wanted to get a really good fit on it
Although after looking at images of the real vehicles
Giant gaps in the armor are not uncommon at all
Also I found it a lot easier
I took most of the sanding off
Because there's an injection point right here on all of these grab handles
I found that once you actually get them glued into place
And you let them dry for a couple of hours
You can hit them with the sanding stick
Much easier to sand off that burr
To get a nice smooth surface on it
As opposed to trying to sand it while you're holding it
I actually broke one of them in half doing that
So I think it's a little bit easier to do this way
That way there's no stress going on
So let's move on to the photo etch
I'm going to try to show you a little bit on bending this photo etch
I can't find my photo etch bender anywhere
But if you have a pair of flat edge tweezers like this
You might not be able to see the scoring
But Academy did score all these pieces
So if you have a piece of flat edge tweezers
You can actually just bend it pretty easily
Just lining up your tweezers right to the edge of the score
And just bending it like that
And you can actually do a pretty decent bend
Now normally I would also go and sand off this little burr
But I find that it's going underneath
The other piece of photo etch
So you're not going to see it at all
It's kind of a pain trying to sand those off
So if it was going to be seen
I'd be taking it off
But if not like this
Show you just one more bend here
And you can see
It bends up pretty easily
And we'll just bend this last little tiny piece
And start putting those on
Remember also when you're putting this
There is a good side and then just a basic side
You want to make sure that the good side is sticking up
Because it has more of a three-dimensional effect
Like springs
This side is kind of more
The side that was laying face down on it
Actually I'm going to try to show you
A little bit of the construction here
I just like to put a little
Little pool of super glue down
And then lightly dip it in
And then we should be able to
Place it where we want it
And yeah
Actually it wasn't too difficult at all
Do the same thing on the other side
Easy enough to do
I have to admit
I was a little bit concerned
About doing the photo etch on this
Now the next couple of ones after this
Are take a little bit more bends
But I think we'll be able to work through it
So I won't really show you too much more
Of the putting the photo etch together
But next time we'll show you
Putting actually on the vehicle
So we got all of the
The rest of the principal construction done
The turret was very simple and easy to put together
So didn't show any of the building on that
Goes together real simple
One other thing I'll point out to you
Is I actually had a customer in here
A few minutes ago
That was asking me a question about
Why would they put this
This spaced armor on here
And I just assumed most people would know
But I'll just tell you if you don't
This was designed to stop
Panzerfaust or Panzerschreck
That the Germans had developed
Which are hollow shaped charge projectile
You know handheld
If it hits armor
It puts a
Because of the shape of the inside of the charge
It puts a molten shot of metal
Right on through
And it'll burn right through
Any type of armor
What this would do is
This would cause the warhead
To explode prematurely
Between with the space between it
And when it explodes
With any type of air space
It will not penetrate the actual armor
So it was designed
They're kind of like when an RPG is now
That it would
If it hits it penetrates through
But if it can explode
Just a little bit away from the vehicle
It will not penetrate the outer armor
So these were just put all over the place
Just to stop that
And they were usually made out of bed springs
Or chain link fence
Or anything like that
That they could get a hold of
Just enough to stop it from going on through
So now that we have the
All the bed spring armor
As I call it
Is all built
And we have like I said
All the construction on this
We did have to do a little bit of
Putting here and there
Just to fill in a few little cracks
But it was minor stuff
So now we're going to go ahead
And take it and paint the entire model
Black and white with our shadow coat
We're going to paint the model first
The NATO black
My kind of like trademark there
I'm going to show you my new airbrush again
Because I've had more and more people
Ask what I'm using
And I've just got the Iwata Eclipse HPCS
I've only painted two models with it
But loving it so far
It's just done a fabulous job
It's nice having a brand new airbrush
Because everything is nice and tight
And fits really well on it
So we're going to go ahead
And paint the entire model black right now
OK, we finished up the black and white
And now we're going to spray it
With the Russian Dark Olive
From Mission Models
This is 34-102
And we'll put a coat of that on there
Not too, too heavy
Because we want a lot of the fadedness
To show through on it
And I've already got it all mixed up
In a separate bottle
With the 20% thinner, 10% of the poly
So let's go ahead and put that on now
After the paint dried on that color
I thought it was a little bit too light
For what I was going for
With this vehicle
So I went back and added a little black
Into the mix
Just a little bit
To darken up the green
For the Russian Green
Got it to a nice color that we like
Then I went ahead
And using three different types
Of masking tape
Started off with the white
Real flexible stuff from Tamiya
Went around the entire turret
Because there are no decals
In this kit for the white stripe
There are some numbers
Which will go underneath
This blue area right here
Not a big deal
Because you don't have to get these perfect
Because in real life
The thing was actually put on
Just with paint brushes
Even sometimes mops
Just to get the paint on
Just so that it was recognition
So they weren't shot at
By other Russian tanks
So we've got this on here nicely
Now and I'm just going to shoot
A little Tamiya white
All the way around it
Just to get in there
And actually if a little bit bleeds
Under the tape
I think it will actually
Probably look really good
Because it will be more realistic
To what the real ones were like
I am really liking my new airbrush
As you can see
By putting this white paint on
It's really got a fine head to it
Does a really nice job
Applying the paint
OK I just pulled the tape off
Like the way it looks right there
We can always do a little chipping
Around the edge
To make it look a little more jagged
And rough
Like some of the paints coming off
But I'm going to shoot the entire thing now
With a Tamiya XF
Excuse me TS 80
Dull coat
And that's going to seal in the entire model
And that way we can do
Our bed spring armor on top of it
And any weathering
That we're about to do as well
Spray the bed spring armor
After we had it all assembled
First black
And then after the black dried
I went and misted over
With the brown black color
That you've seen me mix
And use for the tracks
And it's a mixture of about 60%
Of nato brown
And about 40% nato black
Just mixed together
And lightly misted over there
And it might not be very visible
In this little picture right here
But up close you can really see
It's got just a slight tarnish effect to it
Now we are going to do
A little rust effect on it
But not crazy
We don't want to make it look too old
Like it's been sitting outside for 100 years
Now that all the paint
Has dried on everything
And we have that brownish black color on here
You can see how it looks
Up against the green
It's got just a little different tone to it
Than if you just painted it all solid black
So now that everything's been sealed
We're going to go ahead
And start attaching the applique armor on it
Started to attach the armor
And almost forgot
I went ahead and painted
The 214 number on here
Just with a brush and white paint
I didn't want to use a decal on it
Thought it would look
You know the paint color
And everything would look similar
And it's normally done pretty sloppy anyway
So we went ahead and put both sides on
With the 214
And now we'll finish
Putting the rest of the armor on
So we have principal construction
And painting done now on it
I really like the way
The contrast between the green
And the kind of reddish
Or brownish black color
Whatever you want to call it
For the bed spring
Looks really good
So now that we have it all painted
And sealed
We've let that dry now
Probably for about half an hour
And it's completely sealed in
With Tamiya TS-80
Like I said the flat clear
And now let's go ahead
And weather and beat it up
We're going to use a mixture of MIG
MIG products
As well as using
Some of our Tamiya panel liner
Get the front of it there
To kind of fill in all the different areas
First thing we're going to do
Is go over and fill in
Some of the panels just slightly
Using the panel liner
And I'm going to start off using the black
And just kind of fill in
Some of the highlight areas
On the vehicle
Making sure there's just very very little
On the brush
Kind of highlight some of these
This really makes things pop out quite a bit
Now we are going to go over it
With the enamel thinner later
To take off any excess
We're also going to do that
All around like the rivets
Or excuse me rivets
Bolts on the wheel
You can see how it just makes everything
Hopefully you can see
Now that we have that done
I'm going to take a little bit of
Like I was telling you earlier
The streaking grime
And the light rust wash
And using just slightly
A little bit on areas
We're going to put some
A little bit of rust
Into certain areas
Like around here
Where it would accumulate
And the way we start off that
Is by dipping our brush
In enamel thinner
And putting a little coat of it down first
Getting the area wet
And taking our brush
With the light rust wash
Dip it into those little areas
Okay I had a slight little thinner spill
And actually spilled on most of the tank
And we had kind of turned white in some areas
So I went back over and touched those up
But now it's kind of too stark of a green color
Just too dark
What I'm going to do now
Is I've taken my normal green
That I have here
And I've lightened it slightly
And we're just going to mist on
Some of the areas
Like top of the turret
To kind of get our black and white technique back
Kind of show you a little bit here
Hopefully you can see a little better now
How we went and faded back in
Some of the lighter color on top
To give it a little bit more definition
To the model
Like I said earlier
I spilled some
Quite a large amount of thinner on it
Normally it doesn't react
But in that amount
It turned a lot of these areas white
So I went back in
And just kind of touched them up with the airbrush
Stayed away from all of the bed spring armor
But now we're going to have to go back
And do a little bit more of our weathering on that as well
Putting a little bit more of the grime
And the rust inside of all that
We're going to rust up the front track here as well
And I'm in the process right now
Of putting just a thin little coat down
Of our desert dust
We're going to use this as a fixing agent
And then a small amount of Vallejo's light sienna
We're going to kind of pack that into
Rub it in here
That's going to kind of give it a
Little bit of a dusty corroded area
And then lastly a little bit of their burnt sienna
As well while it's still wet
You want to kind of do it kind of blotchy
Now it looks like it does now
Because it's wet
But once it dries
You'll be really amazed
With the way the tone looks on it
We're also going to weather up the tracks
And we're using our same desert dust
And our light sienna mixed together
Into a slurry
We're just going to
And it looks kind of dark right now
But there again once it dries
It's really going to dry
To a nice kind of flat
Light kind of dusty grime color
We'll just put it over the entire set of tracks
And then what we can do
Is just lightly blot it
So the high areas are missing the color
It just stays in the recesses
And we're going to let that dry for a little while
And come back and I'll show you
What it's going to look like
Using our rust wash
Just putting a little bit on some of the areas
Of the bed spring armor
And it's very very thin down
So it's going to really lighten up
Quite a bit once it dries out
We just want to have a few little areas with the rust
Even a few down in through here
And we're also going to do the same process
Just slightly on the tracks as well
Hopefully if you see down here
I'll move this back
I'm just going to put a little bit
On some of the end connection points
Not the parts that would be rubbed too much by the wheels
Because most of that rust would kind of come off
And we want just a slight amount of it on here
And after this dries flat
You'll just see it start to pick out a little bit
In certain areas
So I'm going to go over the rest of the vehicle
Doing that
And then we'll apply the tools
And show you what it looks like
So here is our completed model
I'm starting off with a zoom in of the wheels and tires
To show you how that little bit of rust turned out
Still has kind of a dirty effect to it
But just a touch of rust inside of it
And then as we pull out here
I went ahead and slightly chipped up the white line
That went all around the vehicle
Because it just was too perfect
Because it would have been put on
Like I told you earlier
With like a paint brush
So it would have been kind of rough
And you can see a little bit of the rust effect
As it starts to build up in there
As well as on the front tracks
360 of the entire vehicle
And also at the top here
You can see how the rust effect
Just formed just like a film of rust
Almost like the way rust really forms
And hopefully you can see a lot better now
That fading that we took time to do
On all those top panels
Adds a nice effect to it
To break up the solid green
Anytime you're painting a vehicle
That's all one color
Trying to make it not so monotonous
Is always a tough thing to do
So the kit is pretty easy and straightforward
As assembly goes
The photo etch
There is a decent amount of photo etch
And they're doing all the bed spring armor
But it's pretty simple
It's just time consuming
Because most of it is flat panels
A little bit of bending
Up around some of the top edges
And it's also nice
If you can kind of bend it a little bit up
To kind of flex it
To make it look like
It's kind of been beat up a bit
But overall the kit is very nice
And would highly recommend it
If you're looking to do a late war T-34
With all the extra applique armor on it
It's a very nice kit
So I want to thank you as always for watching
And please stay tuned
Because we have more videos coming
