【田宮模型】 1⁄48 F-15C “鷹“式戰鬥機

坦克博物館
75粉絲
514 次觀看·2025年11月3日
在我最新的模型建設視頻中,我將嘗試一些我對F-15C Eagle Kit的新技術
F-15可能是我最喜歡的美國戰鬥機,以外觀來說
它有廣闊的翼和雙方垂直尾翼,而且它也看起來像一艘穩定的飛行艇
盒子含有三個主要的Sprue套件,組成了整體的飛機,和一個更小的盒子,包含了座椅裝備
也含有小型的金屬輪胎來支撐飛行裝備
如果包括飛彈,輪胎,外部艦輛和它們的相關框架,這個模型總共有110件
盒子上含有E.G. Echo Golf的尾翼,代表F-15在佛羅裏達州的Eaglin Air Force Base
Z.Z. Zulu Zulu在日本的Kadena Air Base,和F.F. Foxtrot Foxtrot在蘭桂利軍事基地的維吉尼亞州的戰鬥機
然而,我會用L.N. Lima November,代表美國的F-15在英國的Lake & Heath Royal Air Force Base
我們來看看盒子的上方,我會花很多時間製作這個部件
它是飛彈的外部的一部分,我必須注意細節,天氣,並做出最佳的介紹
基本上,這是最有可能會引起觀看者的注意,如果有興趣
從此,觀看者將希望更多時間去檢查該模型的其他功能,並把整體的努力放進它的組裝
我不會展示每一個步驟的製作這個模型
我認為最有趣的部分是製作任何模型的方法,例如繪畫,天氣,以及把模型塗抹起來,讓它看起來像真正的東西
這將是一個沒有後市的圖層或塑膠部件的開箱製作
基本上,這個製作將是關於我能做什麼,我擁有什麼,以及我能帶來什麼基本技術
步驟一的製作是飛彈艙
然而,我還帶來了其他部件,需要同樣的色彩塗抹來完成這個步驟
這個藍色的塗抹對於飛彈艙的內部是不一般的
大多數時候,我看到的是白色,黑色,橘色,甚至綠色,但不是藍色
然後,我塗抹了飛彈艙的前面部分,使它變成天空灰色
接著,我使用油油的底層,將黑色的塗抹塗抹成平面,以使塗抹帶出塑膠部件和塑膠部件的裂開和塑膠頭支撐
接著,我清理塑膠部件的餘下,使用棉絲
雖然我會在開啟的部分留下一些塑膠部件,以使塑膠部件看起來更潔淨
但我認為,這部分的塑膠部件和塑膠頭支撐是最好的
因為塑膠部件的裂開和塑膠頭支撐是最好的
所以我會在開啟的部分留下一些塑膠部件,以使塑膠部件看起來更潔淨
接著,我會在開啟的部分留下一些塑膠部件,以使塑膠頭支撐是最好的
尤其是空氣進口部分
在看F-15的實體圖片中,我看到空氣進口的顏色系統有所不同
我會在這個位置塗上一層淡灰色,再塗上另一層深灰色
再塗上後面的光滑白色,以跟隨我喜歡的F-15圖片的顏色系統
這是我塗上後面的光滑白色,以跟隨我喜歡的F-15圖片的顏色系統的顏色系統
在下方的部分,我也塗上了陸戰機的底部
再往後,你可以看到AIM-7的迴彈導彈和三個陸戰機在結合後乾燥
目前最困難的部分是組裝陸戰機的頭部
我必須把金屬支撐桿放在主支撐的兩半,同時也要貼在桿子的兩半
桿子不能旋轉
此外,我必須把支撐桿放在主支撐的兩邊
我把這兩部分稍微分開來把支撐桿放進去
最後,我還有另一個支撐桿和門
這些是小塊,很難用手和工具去操作
我搞砸了塗裝的工序,我必須把白色的塗裝在支撐桿上再塗上
為了塗裝參考圖片,我檢查了Tamiya的塗裝指示
我量度了模型的部分長度,並與左翼的頂端的圖片相比
做了一點數學,我計算出平均2.86次,也就是286%增大
需要這些圖片來製作我的模型的空氣刮刀切割
繼續製作前面的工序,我開始製作空氣刮刀
我已經製作了座墊,氧氣瓶,空氣刮刀和座墊支撐桿
我現在製作塗裝效果,塗上一層鋼筆塗上銀色的塗料,並塗上座墊的位置
這就是我們製作出來的效果
現在我們完成了空氣刮刀的顏色計劃
我們準備組裝上下兩邊的支撐桿,並開始這個項目的重大製作
我感到驚訝和失望的是,這兩個部分並沒有很均勻地貼合,意味著需要更多的工夫
這些是一些塑膠製作的圖片,為了避免兩邊的線條分開
我用了很厚的塑膠貼紙在周邊的位置保護細節
例如屏幕線,空氣瓶和空氣刮刀,以防塑膠製作的努力削減
我慢慢地在一部分一部分地塑膠製作
一般來說,我會通過圓形的線條去塑膠製作,並且橫向塑膠製作
從反向的左邊看,我們可以看到空氣瓶有自然的塑膠線條
因為實際上,這部分會向上或向下移動,視乎空氣刮刀的飛行模式
空氣瓶的尾端應該沒有塑膠線條
我把空氣瓶的邊緣塑膠掉,以避免塑膠製作
塑膠的邊緣應該會完全消失,當塑膠製作的第一層膜塗上
接著是塑膠機翼的塑膠製作
前面是我的大型參考表,用來塗製塑膠的圖案
現在是兩邊的塑膠機翼,非常適合塑膠製作
開始塑膠機翼的塑膠製作,我開始塗上黑色塗層
這塗層是多用途的,它可以作為基層塗層
它還可以影響深度和陰影的部分,並且會成為我們整體的基層塗層
這個基層塗層是塑膠機翼的兩色塑膠製作中的基層塗層的基礎
最後的結果會影響陰影和陰影
由於太陽和不同的天氣狀況,以及正常的運作使用
我使用的是我的標準的塑膠機翼塗層
我會用工具塗抹整個塑膠機翼,確保塑膠機翼的邊緣塗層
塑膠機翼的邊緣塗層並不需要塑膠機翼塗層
因為塑膠機翼的邊緣塗層和塑膠機翼的邊緣塗層
我已經覆蓋了航空母艦的航空母艦和空氣存放
使用塑膠和棉來保護這些範圍
我絕對不喜歡因為隨機的塗層而要觸摸這些範圍
因為這樣會使事情變得更糟糕
我通常要重新開始塗層,如果這發生在模型的一部分
F-15的下方圖像通常會顯示平均塗層
較少著重於太陽和天氣,並且只會受到液體漏洞和沾沾的影響
所以我用了一些黑色塗層來增添深度
看F-15的圖像,尾翼的外貌較為平均
並沒有上下的重點變化
由於尾翼的直線較少受到站立水,直接的太陽和保護腳踏的影響
我會使用這個塗層的修飾技巧來做出對比
塗層的直線和尾翼的對比
我還會使用這個修飾技巧來做出外部的汽油汽車
尾翼的直線和尾翼的對比
我會使用這個修飾技巧來做出對比
我開始製作這架F-15的其他步驟
使用自製的顏色混合液
我塗上塗層在引擎前面的塗層
然後用輕一點的塗層塗層
塗層接近引擎延遲開關
主要的降落裝置也得到支撐桿在組裝過程中
如您所見
輪桿和輪胎被固定在圓形的插槽上
而不是圓形的插槽
這會阻礙轉動
為了讓導彈更為準確
我將輪桿固定在輪桿的左右兩端
我開始使用刀將導彈固定在輪桿中
我最初使用了電力鑰匙
但我並不推薦
它很難控制
錯誤可以發生很快
如果您不穩定和直線
因此我使用了手動鑰匙
將輪桿固定在旁邊的輪桿
我能更好地進行調整和評估進度
比起我之前所做的輪桿製作
現在是時候製作主體
AIM-7導彈的主體
接著我將輪桿遮蓋
以增加顏色邊緣
我認為這比自動製作顏色邊緣更好
為了測試我自製的CAMO顏色
我開始第二步
使用Vertical Tails
Horizontal Stabilizers
Pylons
和External Fuel Tanks
使用CAMO顏色第一
當然技巧是
把黑暗的Preshade線濾光
但不至於完全濾光
不要不耐煩
繼續等一會
看看效果如何
直到你找到你想要的顏色
你可以一直增加
但如果濾光太遠
你必須重新製作
我還使用Preshading方式
使用CAMO第一
在External Fuel Tanks
來達到相似的效果
相比Fuselage的顏色
有些模特兒
不喜歡Preshading的技巧
經常說它太像線路
在熱夏時
在F-16的飛行線上工作
我觀察到
Fuselage和External Fuel Tanks
經常會流出液體
如燃油或氮氣
而是圍繞
Panel Lines, Screws
和空間之間的Flaps和Wings
所以我不認為
Fuselage的效果
不符合準確的描述
我現在使用Pencils
來增加CAMO第二顏色
另一個優勢
也是使用
指令的增大
我可以把Template
和Panel Lines
從Flight Surface的
Diagram Plate上
調整成正確的方向
Inboard的
Vertical Tails
有一個負面的圖案
與Outboard的圖案相比
我把這些切割
做好
這裡的祕密
是把Pencil
放在部分上
但不要太緊
你要讓它浮動
讓兩色之間
有一個透明線
而不是一個
非常明顯的邊緣
因為這個原因
空間筆
最好是在
表面的正方角度
避免Paint
浮在Pencil下
來控制這個方法
我把部分
垂直起來
讓空間筆
垂直起來
相似的
我把Inboard的
Vertical Tails
也在
90度角度
放在表面上
而現在最可怕的部分
我把Template
以確認
我的準備工作
是否付出了
這兩個顏色的
Camo圖案
作為一名專業的建築師
我必須說
我很滿意
這個結果
繼續
我會Airbrush
Tail Flash Banner
而不是做一個
Custom Decal
Lake & Heath 493rd
Fighter Squadron
叫做The Grim Reapers
是一個
Wide Blue Horizontal Strip
Straddled by
Thinner Yellow Stripes
at the top of the
Vertical Tails
both Inboard
and Outboard sides
The Tail Letters
LN
are simple
and big enough
on this 148th scale model
for me to make
an Airbrush Stencil
for this as well
Unlike the
Camouflage Pattern
we need clear
defined edges
for the lettering
To help secure
a close fit
I hold down my template
Now that the yellow
has dried
I repaint with the blue
to make the center stripe
and also create
two thin yellow strips
at the same time
I now cut out
my upper fuselage stencils
starting with the wings
Definitely use a good knife
I keep an oil stone handy
to keep my blade razor sharp
I'm using Tamiya Masking Tape
which has a lower tackiness to it
so that it doesn't pull up
the primer paint
Again, the diagram markings
on my printouts
make it easier to align
with the actual panel lines
of the model
I neglected to account
for the antenna
which I had already glued
to the jet
so rather than pulling it off
I cut a slot
on my speed brake
stencil portion
With the two engine
nacelle stencils affixed
the top of the fuselage
is ready for paint
And we mustn't forget
the nose portion
below the cockpit
I finally begin
a new technique
for me known as
the marbling
or modeling method
This will produce
random variations
in the color coat
starting with camo number one
This effect will simulate
sun bleaching
weathering
and wear
experienced by jets
during their normal
operating service
between repaint jobs
As before
I place my model
upright
to create a right angle
roughly to my airbrush
paint spray
However
I probably could have
skipped doing this
I incorrectly
started out
holding my airbrush
too far from the model
causing broad strokes
of paint to be applied
rather than narrow streams
needed to make
scale accurate differences
in the color layer
I more correctly
hold my airbrush
close to the model
on the left side
Notice the narrow jets
of paint I get now
I try to make
a crude tiger stripe pattern
as my guide
I kept pulling back
and I had to continually
remind myself
to keep the airbrush
close to the model
I repositioned my model
to get a closer view
as I continued
I could already see
that this technique
was going to pay off
The exterior
was already looking like
the outer layer
of a carrier-based
F-14
or F-18
All I have to do
is adjust to make it
look more like
an Air Force F-15
I slowly add layers
to attain the general
appearance I desire
I continually
work over the areas
and frequently
reevaluate the progress
making sure
I'm remaining consistent
in the facade
You certainly
have great opportunities
here to make your jet
as beat up and worn
as you want
At this stage
it could really look like
an abandoned jet
This plane even looks like
it has its own special
camouflage now as well
Here I'm getting
to the final layer
where I will cease
adding more paint
and leave the weathered pattern
I've come up with behind
For the underside
the marble method
wouldn't be so accurate
I attempt to do
a reverse pre-shading
by concentrating the paint
in the center of panels
after a broad coverage
is already achieved
of camouflage number 1
I try to keep
the panel lines darker
and leave areas of shadow
I remove my stencils
for the first color
and get a preview
of my progress
I now have
camouflage number 1
to a black camo
number 2
Camouflage 1
is now masked off
and we're ready to add
in camouflage 2
over our NATO
black primer coat
I've found that
I'm not having trouble
keeping the paint spray
from going under my templates
if I'm mindful
I elect to start
the marble coat
of camouflage 2
with the F-15
in the horizontal position
I duplicate my efforts
by making random patterns
of narrow streamed paint
within the borders
of my cutouts
Having gained some experience
and learning from
my first camouflage coat
you see now
that I've much improved
the application of paint
and making good random lines
on the next color
On the right side
I begin filling in the areas
with layers
keeping an eye
on the overall look
of the fading effect
and shadows
After I pull up my outlines
I expectedly find
a few dark lines
where the two camouflage colors
didn't quite meet up
I can use my templates again
and adjust them to touch up
or I can use a thin paint brush
and dry brush in the gaps
I'm afraid I might overspray
and fill in my weathered look
so I decide to brush
in the corrections
I use my already thinned
custom airbrush colors
I wipe some paint off
on my papers
prior to applying it
to the model
to match the depth
of my previously sprayed layer
And voila!
I have a terrific
natural looking
exterior surface
It looks worn
bleached and uneven
in its colors
just like a real
large scale jet
I'm absolutely thrilled
with the outcome
There's more work ahead
however
At the aft portion
there is a titanium
heat shield
Tamiya inappropriately
lists the color
as X-10 gun metal
which is much too dark
The actual shield
is more of a silver
and can even seem
like chrome in appearance
I'm substituting
a more accurate color
I take advantage
of my black shading
and let it peak out
here and there
to simulate
a tarnished surface
from the extreme temperatures
produced by the engines
I will work more detail
in it during the
weathering phase
of the project
This metallic paint
is hard on my airbrush
and tends to clog up
the gun
I'm going to have to do
a complete breakdown
and clean up
after working
this heat cover
Even though I painted
and did a little detail
on the radar dish
I never intended
to display it
so in it goes
to be covered up
I think it's a fun secret
Only you and I
know it's there
I've applied a gloss coat
to my vertical tails
and now we can apply
washes to enhance
panel lines
introduce fluid leaks
grime
and add decals
I'm using these
smaller pieces
as a test bed
to iron out
any unforeseen problems
with my weathering
I do not want to
find out too late
and ruin the main
fuselage body
and wings
As usual
I use my oil-based wash
diluted with mineral spirits
to highlight panel lines
and also make grime streaks
from leaking fluids
contaminated with dirt
I clean up
perpendicular to lines
but also try to streak
in the direction
of in-flight airflow
I can use a cotton swab
with some mineral spirits
to clean up areas
if the wash sits too long
in the wrong place
I particularly like
the used grimy look
I'm getting on
the external fuel tanks
For some of the final clips
of the work
I thought I'd show
the top fuselage
as I add panel enhancement
using a wash
I leave some of the paint
in areas to simulate
fluid leaks and grime
On the underside
I continue the same process
of filling in panel lines
I rub at right angles
to these panel lines
If I come to
an intersection of lines
already at 90 degrees
I wipe the swab
at roughly a 45-degree angle
to clean up
and leave the wash
in the recesses
I purposely leave
residue behind in places
to simulate
more fluid leaks
and mixed grime
I've created my own
custom decals
of a random
F-15 tail number
from Lake & Heath
the 493rd emblem
a pilot nameplate
as well as
the US Air Force's
and Europe emblem
using a Photoshop
and Microsoft Word program
and printed them
on a blank decal sheet
This video is getting long
so I'll present
just a few more clips
of the weathering
and decal application
before the final reveal
Just trimming up
the tail number 86164 here
and I'll use Micro Set
and Micro Sol
to place and then
solidify all my decals
on this model
The tail number
seems a little darker
than my LN
but after I dull coat
the whole model
with Tamiya TS-80
everything should balance out
across the entirety
of the model
I know there are
better model builders
on the internet
but I hope you found
this to be entertaining
and maybe give you
a few ideas
for your next model project
