Helmet Ballistic Test: Czechoslovakian Vz.52 Steel Helmet

Military Head & Gear
1 follower
Mar 17, 2025
Hey everyone and welcome to another ballistic test. I might be back after almost a year of
not making these because the weather is not fun to make these in in the winter. Anyway,
we've got the Czechoslovakian VZ-52 or some of you will say 53. I've seen them dated 52,
so this one is dated 52. Just throwing that out there. We'll just get that argument taken
care of right now. You want to get a nice close-up? There, it's a VZ-52, right?
I don't know, it's a VZ-53 to me. Yeah, okay, well, you saw, you know,
cognitive dissonance is a thing, Devin. I don't know. I've got my sexy little Canadian
felonious devonious behind the camera. Felonious devonious. We're going to be doing a lot of
ballistic tests today, but we're going to be releasing these over the summer. A lot of really
cool stuff. We're going to start out with this guy though, the Czechoslovakian VZ-52. So these
were introduced in 1952 and used by the Czech military until it was replaced in the late 90s.
Late 90s, yeah. Yeah, so this was used by Czech and Slovak forces until they came up with whatever.
Before we get started though, I have to do a disclaimer because I get this on every one of
these videos. One, yes, we are destroying a piece of history if you want to look at it that way.
But making history doing it. Yes, and it's a pretty decent, you know,
test that could show you, and that's what's going to segue into the second part of this,
is yes, but the amount of information we get out of this test is worth more than this piece of
history that's actually really rusty and pretty in rough shape. So the second part segwaying into
that is that we know that these are not designed to take direct hits for the thousandth time. We
get that. It's interesting to us as helmet nerds, Devin and me, to see what they can deflect or
stop though, via direct hits and different calibers. Now we'll be doing pistol rounds,
and since this probably won't stop our big boy pistol rounds, we'll just be doing pistols on
this. What we do is if it goes, if it stops all the pistol rounds, we'll go to the rifles. But for
this one, I don't have high hopes for it. What do you think? How do you think this is going to
perform? Probably pretty standard compared to most Comblok stuff. Right. All right, we will get going.
All right, so one more thing. We are outside today. We're not in a enclosed, nice,
cushy environment like mommy's basement. You sure this isn't a simulation? I don't know, but I know
that I feel wind, and you'll probably hear it on the video, so please bear with us on that.
That being said, let's get going. We've got the Czechoslovakian VZ50 pistol in 32 ACP.
We're going to be shooting a 71 grain full metal jacket bullet at probably five yards. Very close.
All right, so it did what most of the other steel helmets do at a perfect deflection. It was a pretty
dead center shot, so it went up and that away, which is kind of what you want it to do, maybe,
instead of going side to side hitting your buddies. So that's pretty on par so far.
All right, so now it obviously passed 32 ACP. We're going to move on to a nine macro. We don't know the
weight of this, but nine macro. That's interesting.
What do you got? Oh, you hit the exact same spot it looks like. Right next to it. Bam. We're on par
today. This makes up for those shitty videos from a couple years ago where we just couldn't hit shit.
Yeah, this is what I meant about the lighting. That's what I was saying.
But yeah, so he hit almost the exact same spot with a slightly larger cartridge and it deflected.
It looks like that deflected up and out. That's the one that hit me with the Swedish helmet last
year. So I'm pretty, you know, whatever. And there's minimal back deformation. Yeah, there we go.
Next to nothing. On the VZ 53 that wasn't made in 1952. Weird. All right, moving on. So now we're
out of the Beretta M92FS. That's actually, uh, this is doing very well. That completely,
you can see the, yeah, come over to this angle. You can see it really well.
Yeah, it splashed it. So the jacket fell off and it completely splashed it. And this is again,
we're actually shooting okay today so far. Wow. That's, this is performing like most
Eastern block helmets do, but everybody thinks they're garbage. All right, now.
1911? I don't know. What's the weight on this one? Oh, 230 grain full metal jacket. 230 grain.
Good hit. That was a great hit. So that's why I said I wanted to go that way.
So we don't wreck all his beautiful solar panels we just got.
So yeah, this thing, I mean a 45 always does that. It's got all that.
It's a big energy transfer. A lot of energy transfer, but this thing defeated it. So,
so far actually not bad. Now we'll move on to the, uh, the real challenge. The real big boys.
Okay. So as we were walking away, Devin pointed this out. Although there's no penetration,
you've got severe back, um, deformation right here. You've got two large cracks in the steel
from the transfer of energy going, you know, it would go from here and transfer back. And it was
so much, it would have cracked the helmet. So that's probably going to, it's going to at least
ring the bell of the wearer, if not, you know, be permanently damaging them. So very interesting
so far. It's, uh, it's doing okay, but that's, that's not good. So now we're going to, uh,
do the deciding factor on usually what helmets are really, in my opinion, in Devin's opinion,
good. And, uh, some steel has deflected these. So we'll see if it defeats the 7.62 by 25 Tokarev.
This is a 1980s Romanian surplus. I'm pretty sure it's 95 grand full metal jacket at
forgot how many feet per second. Okay. Clean hole. Yep. Which is honestly for a steel helmet,
not surprising. And it's not necessarily the end of the world. What honestly concerns me more
is yeah. So there's where it hit on the, you want to hold it there? Yeah. You want to take
this off real quick. Yeah. So it did come right through. Nice clean little hole though. Nothing
super major. And it actually didn't go through the other side, which usually it does on a steel
helmet. So that's interesting. Now we'll, uh, let's see, we'll line this up. So sounds good to
me. So it didn't do good on the Tokarev, which is, you know, a very fast, tiny moving bullet
meant to defeat a lot of body armor. So now we're just going to go to the polar opposite side of
the spectrum. Very big, 142 grain, semi-wad cutter, 357 magnum, huge energy transfer and see what that does.
Interesting. There's the wind again. So that's not the worst we've seen. No, that's pretty good.
Actually. I mean, that guy's still dead. Yeah. It's toast, but it's not going to go through the
other side and hit his buddy. I do like this cool, like pattern. It is really cool. It looks like a,
it looks like a windmill of peace kind of in a way you see that I do anyway. All right. That's
where we're going to end this test. So we'll just do a recap and we'll finish the video.
So overall, that's not actually the worst we've seen. As far as the steel helmets concerned,
you've got the, uh, the smaller rounds with the 45 being kind of a more blunt round, but still in
that smaller, less, um, energy, less velocity category, less penetrating power. None of them
went through, but the 45 did crack the back. Like we were saying, Tokarev went right through,
which is very expected on a steel helmet, splashed in this side. 357 went through,
it's a fatal shot, but also not the worst one we've seen. There's been, what was that? Which
was the one where you like shot the side, caved the whole thing in with the 45 and the 357. Is
that the French one? The French M51. Where it just caved it all in and punched a clean hole.
And it's like, that's, you're definitely done at that point. Even 32 ACP cracked that helmet. Yeah,
that's right. Yeah. It made a big dent in it. Yeah. So anyway, not the worst we've seen,
not the best. It's a mid range, average steel helmet. So these were floating around a lot
the past 20 years and actually getting kind of harder to find. You can find a lot of the
updated ones, but the actual 52s are, um, getting harder to find. So very interesting. Now,
let me know what you think in the comments. Uh, this test is pretty cool. I thought it went well.
We're actually shooting okay today. So all you guys that bitched about our lack of marksmanship
a couple of years ago, still today, we're getting better. We're improving, right? Fair,
fair. Well, you know, they might not know where any of these handguns shoot anyways,
just because they're shoot really good. Doesn't mean that ours do. Right. Yeah. But
today we're actually on target. So we're going to keep going. We're going to rock through a bunch
of these. Um, if you, uh, want to support Devin and I's work, hey, subscribe to his channel,
which I'll put a link to that in the description, as well as the link to my Patreon. And, uh, you
can also become a channel member by hitting the join button below. Um, you know, the support
really helps with things like this. These costs money. The ammo costs money, especially this year.
You know, we drove, or it's going to be two hours round trip to get here and all this stuff. It
costs money. It's not your problem because we're putting out the content for free, but it really
allows us to do these kinds of videos and do things that we normally wouldn't be able to do
just funding out of pocket. So you guys have been awesome in the past year. Devin's got a lot more.
You've got a lot more patrons this year than you did last year, right? Yeah. I got almost 20 now.
Hey, that's so I'm up from like 12. Yeah, that's, I mean, Hey, it's, it's cool. But anyway, so if
you want to do that five bucks a month or more on either platform of support gets into my discord
server, which is a really fun time. Uh, people are hanging out and there's a lot of people in there
and it's a lot of cool things are exchanged. A lot of cool information. I learn a lot. Um, it's fun
a lot of times and all that stuff. So if you want to do that, those are the ways you can, you can
support my work and you know, Devin kind of vicariously. And if you want to support us, but
you can't do it financially, totally get it. Not a big deal. You can just like this video, subscribe
to Devin's channel and my channel and, uh, throw something down in the comments, what you liked
or disliked about the video, who knows. And also share this video out. If you found it educational
and cool, these are pretty cool helmets. A lot of people like this Eastern black stuff. There's a lot
of like flood lore around the fact that, Oh, it's just Soviet crap. It's Eastern crap. Well, it
performed as well as a lot of Western will actually perform better than a lot of Western designs,
which is interesting. So that's kind of why we like doing these videos and it's, you know, awesome.
So that's fine. And if you're in the third category where you just like, nah, you don't want to
support us. Well, I hate to say this, but you already did. So thank you everyone for watching.
That's how you support us the most. And we'll see you on the next helmet ballistic test.
