#pearlbracelet#JTV#JewelryMaking Join Katy in the New Year as she shows off how to create this fashionable, stylish Copper Pearl Cuff Bracelet! Easy for any skill level, we are so sure that you will have a great time with this project to create this wonderful piece of jewelry!
Stay tuned for new episodes on jewelry making every Wednesday, here on Jewel School!
Hey guys, welcome! I'm very happy that you are here.
I'm going to show you a great bracelet made of copper and pearls,
which is very easy to make and is a great statement piece.
If you have some wire and pearls at home that you can display,
we use blank copper wire.
It can be easily processed.
It is very flexible and if you work it with a hammer, it is super strong for this bracelet.
This is a rough sketch of what the shape should look like.
So, let's get started.
Okay.
Take yours. I use wire of strength 14.
It is delivered on a small spool.
You get a whole set with different strengths.
You can probably also use wire of strength 16 if you want.
I cut off 60 cm from it.
That's probably a bit much, but that's how it is now.
And to the side.
Okay.
Now let's bend it first.
This curved part.
And here you really have to decide which pearls you want to use,
because you have to make sure that your pearls fit in this channel.
I will now choose these pearls.
They are a bit big.
I really like it with pearls, so I will probably use the pearls.
But I have never made one with a step pattern, which could be pretty cool.
I just look at how they look on my wrist.
That will be cool.
Another little tip, if this is your decision for the pearls,
with my original I used 15 pearls.
They all have the same size and a round shape, which I like,
because if they twist in your bracelet, so roll around,
they don't really look different.
So I definitely choose a round pearl.
And I like it when the number is divisible,
because I will wrap it in three sections.
So that's 15 divided by 3.
That might make things easier.
And that made my decision for me.
I will use my pearls, my white pearls.
So I have 15 of these white pearls.
And I will only use these, because it is exactly the same number.
Okay.
Take a flat pliers and make a bend somewhere near the middle of your wire.
So. And we make another bend.
But we have to look at our pearls and decide how big our channel has to be.
You can do it like this.
You can measure it with a ruler.
But you don't have to leave enough space for the pearls to fit in.
But you don't have to leave too much space.
Unless you want to make a multi-layered bracelet.
That would be very nice.
So I just put my pearls in this bend and hold them with my tool here
and then make a bend.
Hoppla. So. Okay.
Now I put the ends down.
I work them with my hand to make them a little straighter.
Now I cut them at 7 and a half inches each.
I'll get the little rose out of here.
If you want, you can continue hammering right away.
But I'll cut them now so I don't hammer too long.
7 and a half inches and cut off.
I use my side cutter with pliers 61 and turn it around.
Hoppla. 7 and a half. Not 7th. Okay.
Now I take my workbench block and my hammer.
I prefer to use the structuring hammer for this part.
Because it's simple. Point. I don't know.
I think it looks really pretty and hides a bit of imperfections.
I have my little chisel hammer and my structuring hammer attachment here.
It has 9 different structures. I think that's really great.
I like the one that was there very much. I love the stripe.
I'll probably just stay with it.
But you just put it on the front here and then screw this part tight.
You tighten it and you already have a cool texture.
Normally I leave the chiseling on this side because I use it so often.
We're just going to let the texture dry on these corners
and then work my way down on this piece.
Do you see how cool that is?
If you want, you can try it first with your chiseling side
to start the cold fastening.
I only bend it a little to the outside,
so that the texture is on the same side of the wire.
Okay. Looks so pretty.
And now I look at what I have.
I can already see that the wire is starting to get harder
and definitely stronger for my armrest.
Okay. I tried to tap it a little on the back,
just because a natural little curve has been created by hammering the whole thing.
I don't know if you could see that.
I think I'm just hammering quickly on the back, just to...
I don't know.
It just feels like it's necessary.
Maybe not yours, but I can.
I feel the need.
Okay.
And of course you can take your time and take this step in the right direction,
if you want, but I think I'm ready to just keep going
and continue with the next part.
And I'm a little curious too.
Hopefully the channel hasn't become too small for my pearls.
The more you hammer, the flatter your wire becomes.
So think about it.
Okay. I think that will be great.
Let's see how much longer it has become.
It didn't really get any longer.
So I'll stick with it.
If you are looking for pearls for this project,
you should thread them on best.
This is a 22 wire, but thread them on.
I recommend using about 16.5 to 18 cm pearls.
I wrote it on my sheet of paper,
because I think that's a good guideline.
You can adjust it a little after the manchette is finished,
if you have to fill in space or similar.
But basically it's about 16.5 to 18 cm pearls.
Here with my pattern I only have a little more than 6,
which scares me a little.
But I will try to add that and see what happens.
But I also thought about adding another pearl.
I know that this would result in the perfect number of 15G,
but I don't really care, because I'm afraid.
I think that will be a little.
I don't think there will be enough pearls.
Okay. I'm satisfied with that now.
Okay.
Next, I like to use my 6-step bracket pliers.
But you can also use a round pliers, if you want.
We'll just roll up these ends.
And maybe check the length again.
I'll cut it down to a little more than 18 and 30 cm.
Okay.
Okay, I'll use this little bracket here.
Take the end and roll it into the armband.
Okay, and the same on the other side.
Take the outer end.
Okay.
And that won't be enough to roll,
because we want to be able to wrap it.
So we want these turns to have the same height as this side.
So we're going to lift it up a little bit and roll it in at the same time.
So, you'll see that you need more.
Okay.
So that looks pretty good to me.
Maybe not quite perfect, but that's okay.
And I'm just trying to get an even rectangular shape
so that it doesn't get super wavy.
Next, I have my 22 copper wire here.
I've already threaded my beads
and we're going to put the beads in the middle of the channel.
You don't have to thread your beads on beforehand or anything like that.
But I'm going to attach a kind of small bead stopper to these beads
and then work on this end of my 22 wire.
All right.
So I started at the square end.
At this end, I just take the end of my wire
and make a very tight roll in the middle.
I made three in this direction.
And I actually tried to make a couple on this side of the wire
so that it becomes a little more even for the eye.
Okay.
And if you want, you can shorten it.
Cut off the end.
I'll leave it on just in case I need it later.
Thread your beads
in the middle of your armbands.
All right, so pull them over.
And now we're going to connect these two little loops.
With the first one, I got a super chaotic result.
But that's okay.
It's safe.
It's been holding up for years.
So you can be as neat or chaotic as you want.
But let's see.
I'll prepare the whole thing.
I'll just start wrapping everything around.
I'm going to shorten this 22 wire a little bit.
It's pretty long.
I'm just going to thread it through these two loops
until it's tight.
I'm pulling it out.
I need my little tool.
I'm pushing it through.
Okay.
And then this other loop comes out.
As soon as I've set everything up properly and fixed it,
I can use my armbands to make it a little more even.
I'll do that again.
Again.
This is 22 wire.
You can definitely take a smaller one
if you want it to look more delicate.
But I think 22 wire is great.
That's a good size for a cuff.
And when they start to bend,
take your flat nose and put it back in place,
next to each other.
That's what it looks like so far.
And I'm starting.
It's all coming back to me.
Do you see how the beads are bending a little bit?
They are wavy.
That's why I go back and add these windings at the end.
So don't worry too much about this part.
Now I'm just wrapping a little bit around these two loops.
I'm actually going to cover it up a little bit.
Just to be a little safe here.
Come up here.
You and then maybe back through a loop.
Do it again to your own thing.
Do what you have to do to fasten it at the end.
Make sure that the ends are aligned again.
I'm really the boss with my wire today,
in case you can't see it.
Oh God!
There we have it.
Okay.
So let me set everything up now.
Okay.
Now I want to start winding it a little bit.
I'll leave the ends on first,
because I feel like I could use them later.
I'm going to take my oval pendant
and start shaping my cuff.
Okay.
That's mine.
It's kind of a rectangular oval.
That's how it points in the direction.
Take one side
and put it on the curved part of your oval pendant.
Take the other side and do the same.
And I have a good feeling about it,
because I'm doing this before I wind up the beads.
I'm not sure if I did it the first time.
I'm just slowly getting this nice cuff shape.
You could probably use a round pendant, too.
You could just use everything that's a little bit round
to do that at home, too.
It's not really scientific,
but at least for me.
I'm not like I didn't know.
It's not that complicated to shape this little cuff.
You could probably bend it around your wrist now,
if you want to.
All right.
Now I'm going to take two more pieces of 22 cord
and attach these two middle pieces.
And since I added the additional bead
for the middle part, I need it.
Look, should I take six or four?
I have to take four.
So I'm going to wrap it around here.
Lay it across
and attach the end of your 22 cord to the base.
I love this texture,
because it helps me when winding
and creates a really nice, safe connection here.
Here.
Three.
Lay it across.
Make a quick little anchor here.
Make sure you don't pull too hard,
so that the channel of the bracelet is not closed.
I just want everything to stay in line.
Take my little chain nose.
I pull it together.
And then I just cut off my first end.
Put it in the back.
And if you want,
you can make it so that you wrap it several times.
I think that looks really cool.
All right.
Now we attach the other end.
I think I shouldn't have made the second anchor,
but I did.
I won't do that with the second one.
Okay.
Make sure that you cut these ends really well
and stow them somewhere,
where they won't bother you in the future.
Okay, so that's one.
And then we'll make another one here.
Four are over 22 gauge.
And I can see that I definitely
compressed this channel quite a bit.
But that's okay.
It happens.
Just let the beads stand out a little more.
Okay.
We'll just anchor one of these sides again.
And that's the part that,
in my opinion,
offers a good hiding place.
For example,
if you have a lot of space between your beads,
you can make more of these small wraps
to fill the space.
Maybe you don't even need one of these wraps.
If they are already very tight,
or if you can add them to your design.
You can make them between every single bead.
As you like.
Okay.
I'm going to anchor this here now.
Hoppla.
Okay.
This is a good moment
to put a bent pair of pliers
through this little gap.
Pull them really tight.
Cut that off.
Put them in there really tight.
I love copper.
How it just melts into itself.
Okay.
So these are my two cross pieces.
Now I just have to clean up these ends.
And I'm happy with my first one.
I just cut it off.
Put it in the inside of my cuff.
And this one is still moving a little bit.
Now I can finally bring it
where I want it.
I actually like to go through these loops.
And if you want,
I even made a few turns
with my original one.
Like here,
where I just went across on both sides.
It's so chaotic,
but I don't know.
I don't care.
It just looks like a nice copper ball.
Okay.
So do it as often as you have to.
And I'm going to cut this off here on the inside.
Pull it through nice and tight.
Cut it off here.
Make sure it's not too sharp.
And then you just shape it a little bit like this with my hand.
And that's basically it.
That's it.
That's how you make this cuff.
It's really very simple.
You can proceed as scientifically as you want,
but you know,
with these big round pearls
in this structured copper wire.
It should last for years,
like mine,
and it fits everyone
because it's a cuff,
which is great.
If you need one of the tools or materials
we used today,
check out the links in the description below.
And if you're already there,
let us know
what kind of jewelry you like to make.
Don't forget to like and subscribe to our channel
to be notified about future episodes.
Danke fürs Zuschauen!