Learn how to transform regular printer paper into a stunning craft embellishment! I have created this how-to video using the new TEXT{ures} Botanicals Cut & Emboss Folder from CraftStash which can be found here ⬇️ along with the rest of the new collection
hi Crafters I've got another technique
for your papercraft projects today now
can you believe that this printer paper
copy paper whatever you want to call it
the thin cheap inexpensive paper you can
get from the supermarket can make this
beautiful card embellishment it's like a
glassine effect you know if you buy
embellishments from the shop or from the
store you buy them maybe a few in a pack
with this sort of effect is going to
cost you a few pennies you can make this
at home for very very little and you've
probably got a lot of the ingredients
[Music]
already now I am going to be using an
embossing folder a cut and embossing
folder but you can use stamps and dyes
instead if you want to you don't have to
use this I love the effect this is from
my brand new release Botanicals from the
textures range um I adore these
butterflies and I thought how cool would
that look if this was that kind of
glassine transparent Vellum parch look
but not with Vore parchment you don't
have to buy any expensive materials like
I say copy paper printed paper thin
paper is all I've used you could make
these up in their hundreds and they
would cost you pennies so let's get
straight into the technique for doing
this so I've got my copy paper and I'm
going to put it into my embossing folder
here and as you can see you could
actually make all of these at once all
four butterflies at one time we'll focus
on this large one for now but the same
technique for all of them as I say as
I'm running this through if you don't
have this cutting and boss folder well
firstly it is linked in the description
below and it's a brand new launch so
hopefully it's still in stock for you at
the moment but also if you got stamps
and dyes the outline Dy or even just
stamps and cut yourself a panel you can
do the same effect getting that glassen
effect in your material so I'm just
running this through my machine I'll do
this in real time
so you can see how it comes out I
haven't adjusted the pressure for the
copy paper compared to if I was using
this with uh card stock so it's still
cut beautifully still got that
absolutely wonderful emboss in it it's
really nice and deep as I say just so
you can really see what I'm doing I'm
going to be using this larger one um but
there are two smaller ones here as well
I will pop them out another time now you
could just do the technique on plain
white but it's going to be really hard
to see the detail so I like to pick out
the detail first before I go ahead and
give it the translucent look so I'm
going to use some of my favorite colors
brown and black together for a butterfly
if you're doing grungy if you like
steampunk anything like that these are
perfect so I'm going to pick up some
this is distress oxide Rusty hinge first
of all on a brayer it's important to use
a Brer or go with your ink pad directly
to your emboss because you only want to
pick up the the raised areas and this is
why I love to use my uh embossed image
first of all but as I say if you've got
a stamp then this part will already be
done for you you'll have detail picked
out so I'm just brushing over there the
center of the design and then I'm going
to go with a black and this one is um a
versifying CLA so it's not a distress
ink I'll give my Brer a little white
there just so I don't get the orange in
the black because that would be really
upsetting uh verif find CLA this is also
a pigment ink so pick up some of this
and I'm going to go over the detail on
the edges of the Wings here and give
this kind of a bit of a two-tone look
now you can do absolutely any colors you
want to I'm just doing this as a quick
example for you so go over this side
exactly the
same like so make sure all the detail is
picked out there lovely okay happy with
that so now is where the magic happens
I'm going to give my matte a little bit
of a wipe first of all just clean up any
ink before it
dries okay and what you're going to need
is a piece of card stock or paper to
catch embossing powder and you're going
to need a clear embossing ink so I'm
going to put some brown paper just there
to the side and I'm going to press clear
embossing ink all into my butterfly now
I'm not going to work on the front first
because because I've just put this ink
on I'm going to give that chance to dry
really soak in so you can carry on and
do this step straight away even while
the front is a little bit damp from the
ink still so I'm going to really press
my embossing ink pad into all of that
detail now if you've got a flat image
that you're using this is going to be
much easier so if you've stamped an
image and you've diecut it so it's not
got the embossed detail in this is going
to be really easy for you to do I've got
a lot of detail so I need to really
press to make sure this embossing ink is
capturing every single square millimeter
of the back of my
cut so that should all be covered we'll
soon see when we put the powder on
whether or not I've missed any areas a
clear embossing powder I've got super
fine one super fine isn't necessarily
essential that's just what I like to buy
in bulk in these big
tubs you don't actually use as much
embossing powder as you probably think
scatter that all over the back of your
butterfly and then of course we're going
to melt this clear powder so lay that
down onto my silicon mat so I use a
silicon mat just to protect the
self-healing mat underneath from the
Heat and I'm going to heat this up and
as the powder starts to heat up and melt
you'll notice that the paper the white
paper underneath starts to go a little
bit like Vellum a little bit clear let
me just melt a tiny portion for you you
well let's do half a wing so you can see
the difference now ready you can see
that going darker there because of
course you're seeing the ink through
from the other side it's going
translucent so I'm going to melt all of
this powder evenly and of course if
you've missed any areas then go back and
repeat the process with the ink and the
powder you'll start to see that color
really coming through from the other
side and it's not actually the color
bleeding through it's just that you're
able to see through the paper now You've
Lost That opacity of the paper and made
it translucent on this side so you can
see that side is translucent now let's
not let it fly away and let's melt the
other
side now it looks like down the bottom
here I didn't get any ink I must have
missed that area so I'm just going to
press that bit into ink of course press
it into my powder which is just off to
the side here and then melt that bit too
see it's very very easy to see if you've
missed any areas now that has gone
translucent to a point but the other
side we can actually leave it like this
with that slight translucency or we can
improve it even more by doing the exact
same thing to this side as well so
another layer of clear ink and this is
why I like to work on the back first
just to make sure this ink is all dry
before I start pressing clear embossing
ink into it I don't want to smudge the
colors although these are kind of to
tone and they're Blended quite nicely
together so just press that all over
again squidging into the detail you can
use a blending brush or applicate foam
applicator if you prefer I'm quite happy
to go direct from my ink pad and I'm
going to pick up this powder this is me
cheating really rather than getting any
more out of my tub and just sprinkle it
over making sure that every part of my
butterfly has some powder touching
it so all over the top there just
minding the fingers sometimes where my
fingers have been I need to reapply
afterwards and let's melt
this now obviously that's melted
embossing powder so you don't want to
stick your hand in it as soon as it's
finished give that at least 10 15
seconds to start drying cooling off and
then you can lift it up but we have got
this beautiful as I say beautiful like
glassine effect it's absolutely stunning
so as you can see on the card that I
created with the first one here I did
two additional things so firstly I did
trim around the edge of my butterfly
because I just like the slightly closer
Edge there this one's uh the ink has
caught out out on the edge which is
really nice but if you want it a little
more defined you can take your scissors
and cut those out secondly I don't know
if you can tell but on this side I used
some collage matte medium so this is the
distress collage medium in matte I have
given my butterfly two coats of this on
one half so on this half I gave it the
two coat and not on this half can you
now see how much more glossy this this
half is there is still some Sheen
because I've got very bright lights
directly down onto my desk but it really
has taken that sharp glossiness off of
the butterfly now you could probably do
a couple more coats as well it doesn't
affect the translucency as you can see
you've still got that beautiful Vellum
parchment look and that started off as
did this one as copy paper can you
believe it I just absolutely love this
technique if you like this idea please
do let me know in the comments whether
you're going to try it at home like I
say stamps and Dy you can do it with
those as well I'll make sure I've got
some more projects on my social media
showing you different ideas with the
copy paper and the clear embossing
effect here so thank you for watching
Everybody you'll find this particular
cart and embosser folder linked down
below and the rest of the brand new
textures Botanicals collection as well
thank you for joining me take care and
I'll see you again very soon