2K Video Views·Mar 15, 2025 #DadHowDoI #RobKenney #HowTo Hey, Kids! In honor of National Worship of Tools Day, I’m breaking down the basics of working with tools. From mastering a wireless drill to using a wrench like a pro, I’ll walk you through the essentials every homeowner should know.
Here is a link to my Amazon Affiliate store;
https://amzn.to/3TUvqKX
If you want to help support my mission of encouraging and empowering people,
please visit my Amazon store. When you buy things from my store that you would normally purchase through Amazon anyway, a small percentage goes to support my cause. I have also included items that I can feel good about recommending.
Blessings,
Dad
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi?lang=en
Facebook: https://www.facebook.com/dadhowdoi
Instagram: https://www.instagram.com/dadhowdoi/
Affiliate link to my book;
My Book: https://amzn.to/3idKKzq
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney #HowTo
Disclaimer:
This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
00:00 - Drill
13:55 - Socket Wrench
16:55 - Pliers
18:55 - Wrench
hey kids we're finally getting to the
drill um but before we do that you know
the drill I got a dad joke for you uh
well I was going to tell you uh a joke
about a drill but I thought it was too
boring so anyway let's get into it
here's uh here's the drill that I would
recommend for most homeowners cuz it's
around $100 and it's served me well I've
had it for I think a year and a half and
the battery you know the big part of the
quality in a cordless drill is the
battery if you get if you go too cheap
um the battery won't hold a charge after
a while and you'll be frustrated yeah so
I think you'll be happy with this drill
it has two speeds a one and a two right
here the one is for Speed and then the
two is for torque don't worry about that
too much I just basically leave it on
one for most jobs if you're just
drilling a uh a hole in sheetrock or
whatever you can get by just leaving it
on one I hardly ever take it off of one
and then if we're GNA add a bit to it
you have to keep turning that did you
see that I kept turning this inside
collar so that this thing would actually
open let's just put it at like 11 so now
I'm going to hold it I'm just holding
that lightly and see how the Jaws are
opening okay and again it's a variable
speed too so now I'm just going to put
that in there and then I'm going to put
it I'm going to push this button okay
the forward button and then I'm just
going to hold it hold this right here
right the Jaws are closing around it see
that and then I just hold
this and if I put this on a on a lower
one it's really easy to hold
this the further I go up though it gets
harder and harder to hold that if you go
all the way up to the the drill part
it's really hard I don't think you can
even yeah you can actually hold it so
and I'll show you what all those um
dials are for for other things but if
you're trying to put a bit in you're
going to want to dial this down a little
bit so that you can hold this and then
now I just put it on reverse and I'm
holding it up quite enough I need to
dial it up just a little bit little bit
more yeah so that I can actually get
that thing to come apart okay I realized
I should have showed you the battery too
so right so the battery pack is right
here all you do to change the battery is
you just push down on this button here
and slide it out okay then this one here
it's been charging so the the light's
actually red when the battery needs
charging actually let's go ahead and pop
this out I'll pop in this one you see
that the light actually flashes because
it's being charged this one was fully
charged that's why it had the red light
so then now all we do is we just take
that and we stick it here and slide it
right in I'm going to show you how to
put in drill bits kind of the same thing
that once you understand how add your
different bits it's fairly easy and
there's so many different attachments
that you can put that you can use for
different jobs so you have wood drill
bits and then you have metal drill bits
these are metal and then these are for
wood they're just designed a little bit
different so when you pick them out so I
actually put I put wood drill bits I
just ended up writing that right on the
side basically the same thing again this
is a/4 in I'm going to put it inside
let's see so I want to put it on a lower
speed so I can hold this and then all I
do is I just stick it inside there and I
just kind of hold on to it while it
tightens it around it and then I hold on
to it and now it's in there and then now
if I want to drill for drilling you put
it on that drill setting okay and then
and then you'd be good if you needed
more torque for some reason where you're
going through metal with a metal bit
then you put it on two and just kind of
take it slow okay slow through whenever
you're going through metal you want to
take that slow okay so we got our piece
of wood my trusty piece of wood that I
keep using I'm going to show you how to
put a screw in this is just a a Philips
head um tip like I showed you and then
this I showed these screws before I use
these all the time they're just
sheetrock screws so I'm going to go
ahead and put my my bit back in in just
kind of hold it like that it's set on 15
so it might be a little hard to hold it
so all right and let me show you this so
this is one of the cool things about how
it ratchets out this is one of the
things you'd use this setting for if I
ratchet this thing out watch let me just
show you this I'm going to go to like a
a smaller setting so I just messed with
the setting a little bit I'm going to
put it like at a five once it starts um
trying to drive it it'll ratchet
out see that it's ratcheting out cuz it
uh you need to tighten this up in order
to get it to go so we're going to go up
to a a
nine ratchet it out still still not
quite strong enough let's go to an
11 it's still not quite sunk so we might
need to what I would normally do on this
is I'd actually take it come come back a
little bit
take it out and then drive it
in still not quite flush so let's go all
the way up to
15 see so that's pretty flush right
there okay I'm going to show you a
different kind of screw this uh I've
showed you this before when I built my
bench it's a coated screw and it's meant
for to go outside you you'll see this
for decks and that sort of thing but the
nice thing about it being coated they
they drive in a lot easier than those
other sheetrock screws um and it comes
with see how it's got a star on it it
actually comes with the star bit when
you buy the box of these it actually
comes with a new bit every time let me
just show you real quick so you could
stick that in here just by
itself that's one way to do it and then
you can stick
it you kind of just hold the top cuz the
top doesn't have any threads on it on
setting number 12 right now let's see if
it goes through
not quite pretty close okay let's do it
on 13 so the nice thing about that
setting is it keeps you from over over
sinking
it see so it kind of ratchets out where
you're at you can actually use a bit
holder like this um it's got a sleeve on
it okay and then um the nice thing about
this is that if you were going to put up
a bunch of sheetrock so sheetrock's half
inch um and you'd probably want to go
into the stud about an inch so You'
probably use like an inch and a half
screw I don't have one on me
unfortunately this one's about 3/4 I
think so so watch this that's kind of
cool so it's got a sleeve that actually
comes out on it okay see that got a
sleeve that's actually coming out right
there to help hold that screw right and
then you just put that
in sometimes you have to play with that
a little bit to make sure it's seated in
there good okay so we're going to do
that so that guy's there watch this now
so you just put that here you got that
sleeve holding it for
me right pretty cool kind of sunk down a
little bit I might want to adjust that
so you might play around with that if
you're doing sheetrock you don't want it
to sink through cuz then it'll goes
through the paper and then it's not
really holding good so that's another
nice thing about that setting you would
adjust that maybe play with that a
little bit right I just put a different
bit in there right I put a screwdriver
bit put that star back in
so that's another way to drive this too
I'm not going to go all the way in
because um I don't want to go into my
table but I am going to just kind of
hold see I'm holding the the part with
no threads it's helping get helping it
get started I could slide this down too
it's not going to cover the whole drill
but the nice thing about this bit holder
too if you were going to you could do
all kind add all kinds of these tips
right and this so you take this tip out
stick in you know if you're putting
together there something from
Ikea if you've ever done that and it's
an allen wrench and it's 6 hours later
you're still cranking on that allen
wrench you can stick uh one of these in
you know find the right allen wrench
that goes in here you put it in your
your tip and you're you're in business
right that be a lot quicker that'll
speed things up so and then this has
Philips head and that's what all these
are they're just different variations of
a Phillips head a Phillips head is just
the the one with the plus right so those
are just different thicknesses that'll
work with different screws and then
these are just considered flatheads and
I always when I pick a screw I avoid
flatheads at all possible if you go to
stick this guy in here and you put it
here and you have a a flathead that
you're trying to pull out this thing
you're fighting it all the time trying
to get that out of there okay it'll
slide off and everything with that extra
cross piece on a Phillips head it stays
in a lot better let me show you another
trick too really quick if I was just
going to use this tip a mistake a lot of
people make is this when you're trying
to unscrew it the tendency is to want to
you put the the drill in reverse and
just and kind of help it out but you
actually want to push down and let the
screw do the work okay so you're pushing
down to make sure that stays inside
there and then just letting the drill do
the work okay so with your drill you can
get these different adapters that'll
hold a socket we're going to go ahead
and put that in so let's so I got my 1/2
in socket I'm just going to put that on
there and then I'm going to I can go
ahead and probably even hold this hand
tight for now so I'm going to put that
on there and so there's what's called
Deep sockets this one isn't a deep
socket so it's probably not going to
quite make it but it'll get me close see
I can't I can't quite get there so now
all I need to do is I'm just going to go
hold let's see hold this
side go from this side
and and see how it Ratched it out okay
which is good cuz everything's tight you
see that my my lock washer is actually
flat it's down so so we're good so now
we go to remove it kind of the same
thing pretty easy you just put it in
reverse stick it on
there all right oops I need to tighten
that up a little bit
okay and now it's just working its way
off okay you can see how that would
speed up putting together Furniture like
if you're ever putting together a dining
table or anything a lot of times you're
using sockets or wrenches and a drill
will help a lot with that so okay yeah
let's show you the show you the lag bolt
now too kind of the same thing got that
lag screw you know technically it's a
lag screw a lot of people will call this
a lag bolt but it has a point on it so
it's actually a lag screw and let's go
ahead and put um a washer on so it
doesn't go in too far I'm going to go
here just kind of hand tighten it to get
it
started okay and then I'm going to put
this on here and I'm going to drive it
in there you go yeah it's it um set it
just just where we wanted it so I'm
going to show you how to use um some of
these bits here so let's start off with
just a wood
bit okay A little wood drill bit we're
going to move that up to the yeah actual
drill
part okay nice and clean I have a piece
down below that I'm using just to
protect things right okay so that's that
one so this is called a hole saw I have
this one too with less teeth and I feel
like this one's does a better job okay I
think those were a little cheap so now
here's a trick so when you're drilling
this okay you want see how it's got a
nice nice clean Edge there you want to
flip it over and come from the other
side if I don't I mean there's two
things that'll happen here so if I don't
care about this wood and I hold this
tight and I go through it'll be a clean
Edge on the other side but if I don't
hold it tight it's going to tear that
out so you want to flip it over and come
back from the other
side okay so that's that you just going
of got to brush it off now okay but it
would have tore out here if I wouldn't
have done that okay if I wouldn't have
flipped it over like that it would have
tore out cuz sometimes it can be a bit
of a fight to get that um the way I
normally do is I just loosen
this and then you just work that up and
it'll come out okay so this is a what's
called a speed bit kind of similar to
the hole saw I don't know that they come
out quite as clean as the hole saw but
I'm just going to show you what those do
and I'm going to put that on
[Music]
okay and then I drilled drilled through
here's another tip I wanted to show you
it's called a counter sink and the nice
thing about it is um when it goes in
it'll put a little it puts a little
groove right there so that your um your
screw screw head will kind of just sink
down
insides see that it's got a little hole
for for the head to sit in this is is
kind of a luxury but it's a it's a l
adapter that if you need to reach around
a corner and then now you can actually
drill with around the corner so I
thought I'd show you that I you know I
only had this for one applications I I
just couldn't reach and so I ended up
getting and it was kind of cool to be
able to reach around the corner and and
use that
so um I'm just going to show you what's
cool about a ratchet set okay and so
here's a ratchet okay and then I'm going
to use uh I think that's a/2 in um and
I'm just going to put it on here and
then so a ratchet works like this see
this lever here on the side it makes it
go forward or backwards and remember
righty tidy Lefty Loosey so right now
it's ratcheting when I'm going left so
it's actually this would be to loosen
okay and then if I flip that lever it
goes just the opposite now I'm
tightening okay so you want to make sure
to flip that lever there's a lever on
most ratchets this one has a little dial
on the back same thing so now we're
going to be tightening it okay and then
I'm putting it on here and I just go
like this I push it Forward I ratchet it
back Push It Forward ratchet it
back see much easier than trying to spin
a wrench around it now if I want to
loosen it I just flip that lever back I
do just the opposite so I put it back on
there and then I go backwards
okay okay so that's all there is to it
and here so here I'm going to show you a
couple things about the the Cobalt brand
so here's a normal ratchet and that's a
3/8 in Ratchet is what that is cuz
that's the measurement of that knob
that's sticking out there and so you
sometimes you'll have to use you know
depending on what you're using this one
has a 38 in hole in it and you just put
that in there right that works fine but
then when you get into the smaller side
sizes they have a smaller hole okay and
so that won't fit in there so you have
to use this adapter okay so you put that
on there and then that fits in and
you're good to go so that's kind of a
standard type of Ratchet this Cobalt
ratchet I thought was kind of cool um
because it actually has this design okay
so it actually has three different sizes
it has that um 38 in size on the back
and then it has the/ quarter inch here
and then it has the/ in so it's all
built together you have lots of
different accessories in here too so
here's just an extender It just fits on
the end of that and if you needed to
reach a little bit further you had to
get around something that's all that is
just an extender and then I got the
extenders for the other two same
basically the same thing so and that
fits on this
side and then you also have uh with this
particular set it comes with a little
screwdriver
adapter so you can use it for for
smaller uh nuts and bolts
okay and then another cool thing that
actually came in this set too is it has
an adapter so you can actually use this
as a screwdriver so it has all these
tips right here so it has all these tips
and I could use it as a screwdriver
too we're just going to walk through
these and start with the most basic one
which is just a basic pliers it has two
different adjustments here so you just
open it up and it gets a little wider
you close it in right and then it and
then you can get smaller nuts with that
too next we have a what's called a
needle nose cuz sometimes you um need to
get into tight spaces with this it also
usually comes with a little uh cutter
here too so you can cut wire with it too
so that's nice to have around next is a
channel locks that pliers that we showed
you it's uh it only got those two
settings this actually has multiple
settings and the nice thing about it is
it it has channels on it all you do is
just slip them into the channels right
right there and then there's another
Channel you just bring it back get a
little bigger right and you just work
your way down till you fit the size that
you need for maybe the pipe or whatever
you're trying to get a hold of lastly we
have what's called a vice grips and when
we were kids we used this all the time
for like loosening the nuts on our on
our bike but the problem is if you're
you're not careful and you use it too
much you can you can round the nut or
the bolt and then if you go to use a an
actual wrench it doesn't fit on it
anymore cuz you've rounded it off right
so just be careful with overusing it but
it is Handy to have around especially if
you can't get a a nut off right maybe a
little WD40 and then you use this and
it's got It's got a little um screw on
the back right so you tighten it and
that those jaws get a little tighter or
you loosen it and get a little bit
bigger and you can use this and it you
clamp it down um and then and as you
tight you tighten it as you go okay so
then you got your your bolt here and you
can go a little bit smaller than the
bolt and then you clamp it down and it
actually snaps on there and it's it's
held on so you can loosen just about
anything okay so here's a closeup of
what a bolt looks like a bolt and a
washer and then you also use use a
locking washer it's got a little spring
it's kind of set cockeyed like that so
so that when you tighten it down it
creates tension which keeps the bolt and
nut tight and they stay together okay
and then this is a a lag bolt it's just
basically the difference is it's got a
pointy end cuz it's meant to work kind
of like a screw where some applications
you're not going to be able to get that
nut on it you would drive this like if
you're going to hang a basketball hoop
or something you on your garage and you
can't
uh can't get a nut on the other side you
would drive this into into the wood okay
so here's how you would a basic real
simple I mean there's other variations
on this but we would stick we would
stick the bolt through with the washer
with a flathead washer so that when you
tighten this this head doesn't get
pulled down inside the wood we put
another flat washer on the other side
and then we put on that locking washer
like I was talking about and then now we
put our our nut on okay and then you
just can finger tighten it at first get
it down there get it close this happens
to be a/2 in wrench it's got a open end
and it's got a closed end and I'll show
you what that's for you're going to need
something to hold that other side and
that's where pliers come in okay I tried
to grab this here it doesn't fit really
well so you open it up and then it fits
really well cuz you're going to need
something to hold on to that other side
so let's get that on here while I
tighten this
side okay so that it'll hold that bolt
while we're tightening that and as you
tighten it down you can see that it it
squished down that locking washer right
can you see that it was open and now
it's closed and what that does is it
creates tension so that this thing won't
work loose right if that wasn't there
and you were using this on maybe a
wheelbarrow or something over time all
that shaking from the wheelbarrow will
get that thing to come loose if you
don't have that locking washer so that's
what that's there for see how this fits
on here nice and clean fits on there
clean and it cuz it works on those edges
and if you overuse the wrong tool and
you you're trying to Reef on it to get
it off you can round you know the thing
will slip and then you round it off and
then I wanted to show you this too so
this is the lag bolt so there's a thick
Center there cuz if you tried to cram
this through this wood it'd be really
hard right so what you want to do is you
want to have a pilot hole that's a
little bit B smaller than that inside
and then now you can use this and drive
it in right this is so much easier with
a drill but that see how it's it's
biting now it's creating its own threads
inside that wood if you tried to do this
without without drilling a pilot hole
you'd be it would take forever and then
you get the wood starts splitting and
stuff so you don't want to do that okay
this is a basic Cobalt brand is good
I've had good luck with them but this
one came with two different kinds it's
got the SAE which is basically the
American I think it stands for Society
of Automotive Engineers they had to
standardize on how they were going to on
the wrench sizes and that sort of thing
so they came up with this standard and
basically what it is it just works 3/8
7/16 1/ in it's basically just like your
standard American ruler the rest of the
world's on Metric so that's all that is
it's got both sizes here too right you
just uh it's got an open end and a
closed end you know open end you can
just use real quick but if you're having
to do a a lot you can really you know
you can make make a lot more progress
putting that thing on and going around
and around anyway uh thanks for tuning
in and we'll see you next time on tool
Tuesday God bless you