Why You Should NEVER Sand Your Spoons + 14 Other Pro Tips

Carving Art Channel
11 followers
1 Video View·Mar 11, 2025
Are you interested in learning the art of spoon carving? Look no further! In this video, I'm going to address the top 15 questions that everyone has about spoon carving.
Is it a pig? It's my donkey, that's very weird. It's some short legs. Listen, I did my best. I'm Anne,
I've been carving spoons for nine years and this is my friend Michael from back in our Seattle days.
Long-time friends, we did a little bit of power carving in our first video together. We made this
alpaca. And now I'm back to learn how to carve some spoons. So Michael, yes, ask me all of your
spoon carving questions. How long does it take you to carve a spoon? When I first started it took me
about nine hours to carve a spoon because I was just whittling it away. I had no idea what I was
doing. I couldn't be efficient with my stock removal. But now I can go from a log to a spoon
like this in about 45 minutes and smaller spoons like this, you know, 20 minutes. It's impressive.
It should also probably be mentioned that I've probably carved about 2,000 spoons. So, you know,
it gets a little quicker. Do I need a shop full of tools to get started in spoon carving? Absolutely
not. Most of the time I'm carving onto a pillowcase on my lap, sitting on my couch watching TV,
and I'm using four tools and a couple accessories. We need a Sloyd knife. You can get started with a
pocket knife, but if you want to get into it, this is about $25. It's absolutely worth the investment.
Then you need a hook knife to get the curvy bits out of the middle part of your spoon.
You'll need an example spoon so that you can get the design and proportions right. A sharpie marker
comes in super handy. You'll need a hatchet of some sort. This one's $15. You'll need a saw
and then you need something to sharpen it all. These are wet dry sandpaper that I buy in a huge
pack that's a lifetime supply, $11, and then you put it onto little scrap pieces of wood. This is
a leather strap. This is a dowel. This is basically my entire kit. I know a lot of people are
intimidated to use a chainsaw. Do you have to have a chainsaw to collect wood for spoon carving? Oh,
absolutely not. Most of my arborist friends that I got wood from in the city would actually cut it
to the lengths I wanted for me, but this saw itself with a little elbow grease will get through
any log that is spoon carving material. So just patience and a good saw and it'll get there.
That's awesome. So how much does all this cost? You can go cheap and get started or you can,
you know, spend as much money as you want. I have some axes that are, you know, much bigger
investments, but you can get all the stuff that I just showed you for under $100. That's not bad.
No. So what kind of wood can I use to carve a spoon? You want to use fruit and netwood if you
can have access to it. And very specifically, we want to use green or freshly cut wood. I personally
like to carve walnut and cherry best, and it's really just because that's what grows here and
I can get it all the time. So I've got tons of walnut and cherry scraps in my wood shop. Can I
use those? You totally can carve spoons with dry wood, but green or freshly cut wood is a whole
lot better to carve because it's softer. It's still got all the water in it. It's going to be a much
more enjoyable experience both for your hands and you're, you know, not getting blisters, but also
it's a safer experience with these tools because you're not having to exert quite as much pressure
and pressure is where things get out of control. It's also really, really hard on your edges of
your tools to carve dry wood, but you know, if it's all you've got, practice with it and then
become a more discerning customer when your friendly local arborist calls. Well, I live in
the city, so where can I get greenwood? You mean you don't just have a forest in your backyard you
can go chop down trees? You don't. Well, that's unfortunate, but actually, you know, when I lived
in the middle of the city in Seattle, my best resource for greenwood was my local arborist. I
actually went into the Yellow Pages, yes, I've been doing this a while, and looked up all the arborist
companies in the area and I called them one by one. I was basically like, hey, if you ever get wood
like this, would you be willing to give me some or give me a call? And I ended up meeting
a few really good friends that ended up supplying me, you know, every time there was a cool tree,
I would be the first one they'd call. And it's really cool actually because this is actually a
really good way to get wood because you're actually doing the arborist a favor. Most arborists have to
pay to get rid of the wood that they cut, so they're more than happy to give it to you.
That's good to know. Yeah. My neighbor's tree has a little branch growing over the fence,
could I use that? Beyond your relationship with your neighbor being in jeopardy, it would also
depend on the size of the branch that was available. I really like to try to carve wood this
big and bigger, or a better way of saying it is to think, I want it to be three times as wide as
the spoon that I want to carve, because we need to get rid of the pith so that it won't crack and
warp. So when using wet wood, how quickly do you need to use it? It depends a lot on the dimension
of the wood and your climate and species, how long ago the actual tree fell as opposed to how
long ago it was alive. But really, I try to use freshly cut wood as quickly as possible. Just
after 24 hours, it'll start to check at the ends. So if I do have a lot of wood that I'm not gonna
be able to use right away, I'll take it in as long of lengths as I possibly can, and then those
lengths will help preserve the moisture in the middle of the wood. So as I'm, you know, I could
still use this by cutting an inch at a time back behind until I get to some wet wood. To preserve
wood longer though, I will cut into spoon blanks like this, and a whole bunch of these will fit
into a plastic bag, which will also fit in my freezer. So this will last in a bag in my freezer
for up to a year. Oh wow. Yeah. One other really important thing to think about is that the more
grain that we expose, or the smaller the wood gets, the quicker it's going to dry out. So even
when I'm in the middle of carving a spoon, if I'm going to run up to the house and grab lunch or
anything, I'll toss it into a bag full of moist shavings, and that will help to preserve the
moisture in the wood. I'll keep my spoon blanks in a bag like this for two to three weeks, and they
won't dry out there. So this is a good way if you're going to get to it right away. Otherwise,
toss it in the freezer. Cool. That's good to know. So I heard from some carvers that you can
soak the wood to get it to rehydrate. Is that true? Um, to a certain extent. So if you soak
wood for, depending on, you know, the grain structure, the porousness of the wood. So oak
has really open pores. It will soak up some moisture, but that moisture will really only
penetrate about a quarter of an inch deep. So if you soak it and then you carve it, you're going to
carve that soaked wetness out of it really, really quickly. So it's kind of a law of diminishing
returns. A lot of people also want to steam it. Steaming works better than soaking. But then again,
you bring it out of the steamer, it's so hot you can barely touch it. And as soon as that steam has
cooled down, most of that water is also evaporated. So really, it is just best to find a source of
green wood and to practice on that. The species really doesn't even matter. As long as you're
getting straight grain, like good sized wood. I've carved pine, not ideal. I've carved oak,
not ideal. But shoot, you end up with a spoon and you use what you got to get what you need.
So I noticed you're cutting towards yourself and I've always heard that that's
really dangerous. That is a great rule of thumb if you don't know what you're doing.
But we spend a lot of time focusing on knife safety and inbuilt safety measures that will
keep us safe. Actually, I use this cut, it's called the pull cut, for 90% of my spoon carving.
And it is in fact one of the safest and most controlled cuts that we can do because I'm being
very careful to have stops. I know exactly where the knife is going and it can never get out of
control. So I have full control, lots of power, and plenty of safety as I'm doing this. How often
do you sharpen your tools in spoon carving? A good rule of thumb for these tools is that the
sharper they are, the safer they are. I know that that's really counterintuitive to a lot of folks,
but anytime we are using a dull tool we have to exert a whole lot more force. And force then is
an opportunity for accidents to happen because if you're pulling really hard you don't have
control anymore. So keeping our tools really sharp is really important. A good rule of thumb is about
every 15 minutes that the knife is touching wood, I'll stop and give it a quick touch up.
Sharpening every 15 minutes does probably seem really excessive, but there's actually a huge
benefit in doing that because as long as I'm sharpening regularly I only have to do a quick
touch up instead of a full sharpening job. So this tool is called a strop and I use this to touch up
the edges of my tools and unless I run into a rock or you know drop my knife on the ground
I can get away with only doing a quick strop every 15 minutes for two, three, maybe even four months
of carving. Like you know being fastidious at the start really makes it a lot easier for me to
have less work later on. When I'm finished with the spoon do I sand it? You can sand it, but
ideally we want to get to the point that we can actually finish it with a knife cut because
sanding is scraping the surface and making it very susceptible to water. Whereas when we're
cutting we are shearing the surface instead of scraping it. Plus you have some major brag points
if you don't actually have to sand your spoon, but as you're learning sanding is absolutely okay
and there is no shame in it. What finishes do you recommend applying to the spoon? Any food
safe oil will work. A lot of people use mineral oil. I personally use walnut oil and basically
anything that is not going to go rancid is going to be fine. Coconut oil, you don't want to use
olive oil because it will eventually go rancid and make your food that you stir with your spoon
taste a little funky. So after you've finished it how do you maintain it? With wooden spoons you
definitely don't want to put them in the dishwasher. You want to hand wash them and ideally hand dry
them right away and every once in a while you'll want to reapply oil. Basically when it's lost its
sheen or it starts to get white lines along it that's a good time to re-oil it. It is wood so
eventually it might need to be re-sanded. You know take a few new finish cuts on it. I actually
often will revisit my older spoons after a lot of washes and just kind of refine the shape a
little bit. In fact this one is one that was much bigger and bulkier and you know it needed to be
further refined so I did that and now it's a nice new spoon again. So one really interesting thing
that's definitely changed for me since we started hanging out is when we carved this alpaca this
was really one of the first times that I had to like really think about reductionist woodworking
and one way that I've really grown the last couple years with woodworking is learning how to
see three-dimensionally. I mean I would be very interested to carve another alpaca now
all these years later because I mean that's massively changed my spoon carving journey as
well. That's cool to hear. I mean yeah that's the way that these sculptures are made too. It's like
you cut from the side cut from the front and then then you reduce from there. I think there's a lot
of similarities to carving spoons and carving more complex 3D objects. One funny thing to me
that like as we're sitting here is just how different green carving and green woodworking
in general is from when you're using killed and dried lumber. Like we had to power carve this if
we had had to do this with Floyd knives it would have been a disaster. Yeah. But it's a whole
different toolkit. It's a whole different skill set. You know we had to have a workshop to be
able to do this project whereas we could literally do this sitting at a campfire in our bedroom like
whatever. But I do also want to share with the audience a funny thing. So Michael is not a
beginner carver. He's done a lot of carving. But he has not done very much green carving.
True. Which is very different. So I'll show you this. This is funny to me. So Michael made this
for me when we were doing the alpaca project together and I was really impressed by it because
thinking three-dimensionally was not a thing that I was able to do. So you know I may now be the
more accomplished spoon carver at least until you get some more practice. But this was my
this was my animal. So the comparison between these two is really funny to me. Did you do that
before this or after this? After. So I taught you well. Yeah. Anyway do you know what animal it is?
Is it a pig? It's my donkey. That's very weird. It's some short legs. Listen I did my best. What's
the number one mistake that people make when carving a spoon? More often than not it's cutting
themselves because they don't understand how to safely use the knife in such close proximity to
their soft bits. I actually have a whole article on this very topic telling you the five safe knife
grips to use when using carving tools. It'll show you how to use a Sloyd knife and a hook knife.
It's on my Squarespace website and of all trades dot com. If you're interested in spoon carving
make sure you check out my blog. I have a link in the little description thing down there. I have
tons of articles about the tools that you need, different techniques. Maybe you don't want to do
green wood. Maybe you want to use dry wood. Maybe you want to use a spokeshave. Maybe you want to
utilize your workbench a little better. All of those things can be found on my website along
with a myriad of other things too because I've been using Squarespace to host my website since
2012 when I started my business. That's 11 years of collected articles about all the things I'm
interested in. Homesteading, woodworking, blacksmithing, DIY mechanics. Squarespace is a
fantastic resource for not super tech savvy folks like me to be able to very easily drag and drop
whatever information they want to share with the world into a beautiful artist design template
and then share it with the world. Squarespace gives me the opportunity to host an online store
where I can sell merchandise, plans, educational videos, and all sorts of fun stuff. If you're
interested in starting a website of your own, check out Squarespace and when you're ready to
launch go to squarespace.com slash animal trades for a 10% discount.
