My Load Bearing Equipment (LBE) Setup

Defense Systems Archive
1 follower
Mar 7, 2025
In this video we will look at my current Load Bearing Equipment (LBE) setup that I use for training at the One Shepherd Leadership Institute and S&S Training Solutions Winter Forge training events.
What's going on guys, Brunson with the 3-1, appreciate you guys tuning in.
So, I recently uploaded a video called The Recon and essentially it's just a short film
about a solo reconnaissance mission and a notional conflict against a notional enemy.
And a lot of the comments I saw on that video were pertaining to the web gear I was wearing.
So I thought it'd be a good video just to give you guys an up-close look at my web equipment.
This isn't going to be a full-blown breakdown of all the little
minute things I was carrying or do carry on my web gear.
This is just going to be a quick overview of this web equipment.
Since you guys get a general idea of the type of web equipment I'm wearing and how it's set up.
So just how I got to this point and why I chose this web gear.
So if you guys have been watching my channel for any amount of time,
you know I do a lot of training at the One Shepherd Leadership Institute,
as well as S&S Training Solutions.
And for the past several semesters, I've been rocking this thing right here.
This is a LBB 88 in OD Green.
Typically you're going to find these in woodland camouflage,
but at the One Shepherd Leadership Institute, all your gear needs to be OD Green.
And the reason for that is because, you know, at the One Shepherd Leadership Institute,
there's two different uniforms.
There's a woodland uniform like the one I'm wearing right now.
And then the OPFOR side usually wears straight solid OD Green.
So they want your gear to be OD Green so that you can wear it with both utility uniforms.
This past year at Winter Forge, which is hosted by S&S Training Solutions,
not One Shepherd, but it was going to be a training, a joint training venture.
I was going to be on the S&S side and the S&S uniform is Multicam.
And I think that Coyote goes better with Multicam.
So I wanted to get some Coyote gear to wear at that Winter Forge training event,
this last one that we did.
And when I was looking online, I'm a big fan of surplus equipment, guys.
You know, surplus gear, you can get usually at a decent price, very top quality gear.
And a lot of that gear is made by Eagle Industries.
Eagle Industries has kind of been the forerunner for U.S.
servicemen infantry equipment for a long time now, at least during the GWAD.
So generally speaking, when you see Eagle Industries gear, brand gear,
it's pretty good stuff.
And you can usually get it, you know, at a good market value.
So one of the things I came across was this.
And this is the Eagle Industries H harness.
The actual nomenclature on it, on this tag here, says HG-VS-MS- and then whatever the color,
this one says KH and this one says RG.
I'm assuming that's for Ranger Green.
And then underneath that, it says H harness, okay?
So when I saw this on, I think it was eBay, it looked pretty good.
And I've always been a big fan of, you know, the H harness type suspenders.
And I thought this was going to be an excellent snag.
And I wanted to get it.
It was cheap.
I can't remember what I paid for it, but it was reasonable, maybe $40 or $50.
And I thought it was going to help facilitate carrying all the
traditional stuff that I normally carry on my web equipment.
So, you know, I went ahead and bought it.
And I wore it, this one in particular, to the Winter Forge training event.
And I made sure all my gear was, you know, coyote.
And guys, I absolutely loved it, right?
I absolutely loved it.
And we'll get in closer to look at this gear here in a second for you guys.
But I loved it so much, I wanted to get an OD dominant, you know,
set of it so that I could wear this at One Shepherd.
So I could wear this in the, you know, the fall, in the winter,
at S&S Training Solutions Winter Forge training events.
And then I could wear this OD set when I go to One Shepherd,
which, you know, traditionally those semesters are in the spring and summer.
So without further ado, let's go ahead and get in up close looks,
and we'll start talking about this gear.
All right, up close look at this web gear, okay?
So nothing much to it, guys.
It just has a traditional, you know, H strap harness style, which I really like.
And this equipment is, you know, comes kind of large.
And I think that's the biggest criticism of this gear is people get it and they're like,
man, this thing's way too big for me.
How does it fit?
And then all you have to do is remove this back panel here and collapse this down.
And what I mean by that is on the back here, you guys can see they have buckles, okay?
So you can remove this back panel.
And then this, each side here would attach to these buckles.
And then these would just attach to each other, removing this backside, all right?
So that would make this whole web equipment a lot smaller
and fit more comfortably on smaller people.
I'm a larger stature guy.
So even with all these buckles tightened down as tight as I can possibly go,
it's still somewhat loose on me.
But I think it gets to the point where I actually prefer the way it fits
with all this stuff tightened down all the way.
And with having this panel back here enables me to carry that butt pack, okay?
I believe the reason why these are so big is because these were designed to go over body armor,
all right?
So, you know, over a flack, over a plate carrier, things of that nature, which is great.
I absolutely love that because I want to keep my gear as standard as possible.
And I want to, you know, try to use the same gear as possible.
So having a set of deuce gear that will enable me to just run, you know, if I want to plus it up.
And what I mean by that is like, if I want to add body armor,
I can literally take this plate carrier and a plate carrier can go in conjunction
with this web equipment.
If I wanted to wear a flack vest, you know, with no pouches on it,
put the flack on this deuce gear to go over it.
I come from an era where that was the norm, all right?
We used to wear interceptor vests and then we'd put our deuce gear over the interceptor vest
before guys really started to attach pouches directly to the flacks themselves.
So as you guys can see, this HR comes down and has three attachment points where you can
adjust the gear to your specific liking and height.
I also have two grenade pouches towards the bottom here.
And grenade pouches are great little utility pouches, guys.
Just because you don't have grenades doesn't mean they're not useful, okay?
As you can see, I got a piece of electrical tape in there.
On this side, I've got a compass, which, you know, with MOLLE and PALS, you know,
compasses are easy to dummy cord so that, you know, if this were to fall out from extensive
use or crawling or whatever the case may be, you're not going to lose your compass.
It's going to be retained in your gear.
So I think grenade pouches are great little utility pouches.
You can usually get them pretty cheap and, you know, that's why I have them on my gear.
So I wear them all the way at the bottom.
That way I'm trying to clear up and keep these areas free.
I was using a tourniquet up here on this left shoulder.
It just, it gets in the way, guys.
And, you know, I was tired of working around it with my pack strap.
So I'm trying to free these up to keep stuff off them so that, you know,
nothing's getting in the way of pack straps and rifle butts and stuff like that.
So I've moved that tourniquet down here.
We'll talk about it again later.
Moving to the back side.
So the back side is a, it's just a MOLLE style panel.
And I've attached a Blackhawk Camelback holder to it.
And I've always loved these.
I've used these since at least Afghanistan.
I don't think I had one of these in Iraq.
But, you know, you can carry not just a Camelback in here.
This kind of doubles as a mini backpack.
All right.
So you can keep a VS-17 air panel, you know, Pyro, whatever the case may be.
I've thrown PRC-152 radios in here and ran the handset out of it.
They just, they're great utilitarian pieces of equipment,
especially if you're not wearing a small, you know, like a patrol pack in addition to this.
If this is your patrol pack, then you can put some stuff in there.
No problem.
All right.
Going back to the front here.
So on the front, the whole gear itself attaches or connects with these two Fastex style buckles.
Okay.
So, you know, if these break on you over time with extensive use, you can just replace them.
They're just your standard issue USGI buckles.
On my left side, got two AR-15 magazine pouches.
These particular ones are Blackhawk.
There's other companies that make, you know, pouches that are just like these.
Okay.
On the right side, I have just a single pouch for two AR-15 style magazines.
And that enables me to carry on my web equipment, six magazines.
And then I have one magazine in my weapon for a total of seven,
which seven full AR-15 magazines.
That is a standard combat load for an infantryman today.
So that's why I have that.
That's why I have the amount of magazine pouches that I do up here.
Okay.
Moving on the right side, this is just a utility pouch.
I believe a hundred round saw pouch.
Open this up and then you guys could see inside here, I've got my MVGs.
And I did a whole video on this MVG pouch.
If you guys want to check that out.
Essentially in this utility pouch is just an Eagle Industries padded insert
that you can put in there.
Those are real cheap.
You can get those anywhere.
Check out that video I did.
Okay.
I've got my dummy cord.
So this is just a small piece of 550 cord that I can take this dummy cord on and I can attach it.
When I'm ready to pull my MVGs out and mount them on my Kevlar,
you know, I can undo this, attach this to my Kevlar itself.
And then when I'm done using them on my Kevlar,
undo these, take this small carabiner and attach it to this piece of 550 cord.
And there we go.
Now my MVGs are dummy corded and I don't have to worry about them
falling out on the move and getting lost.
All right.
And falling into the wrong hands.
When I'm done, I'm going to put the MVGs back inside the pouch,
stow that excess dummy cord, secure the pouch.
And there we go.
All done.
All right.
Just to the right of that, I have a UW Gear PRC-152 radio pouch.
And I don't have a PRC-152, but I do have a bow fang that's about the same size.
Okay.
And I can stick this in there.
As you guys can see, it fits like a glove.
All right.
I can secure the pouch.
All right.
So the radio's in there.
I've got a handset and I can run this handset.
What I did in the recon video is I just ran this handset down along the backside
and then came up underneath the arm and then it would hook onto my support side.
Right.
So I had the handset right there at the ready so that I could answer and hear
radio calls and transmissions.
So One Shepherd has recently gotten rid of their PRC-77 radios
and they're going to essentially a clone of a PRC-152.
So something similar to this.
And that's what they're going to start running at One Shepherd.
So I thought it was a good idea to make sure I had radio pouches attached to this.
Okay.
Right next to that, I have this knife sheath.
This is essentially a utilitarian knife sheath.
It's not specifically designed for the knife I have in there,
but it's designed for knives of its similar size.
Okay.
So this particular knife sheath is made by Spec Ops brand.
And I have used this knife sheath for years.
I took it with me to Afghanistan.
I wore it on my Marine Corps issue plate carrier over there.
And that's what I ran.
And I've used it ever since.
And it's just been a great, fantastic knife sheath, as you guys can see.
Okay.
I think the only modifications I've had to make to this knife sheath ever
is sticking some cardboard down inside there
to help tighten it up on my particular type of knife.
Whether it be this Marine fighter knife made by Ontario Knife Company
or your typical K-Bar knife.
It has a small pouch right here, which I usually keep a Gerber in there.
Gerber multi-tool.
And it's just been a fantastic sheath.
So that's what I've got there.
All right.
Moving to the back.
On each side, I have two canteen pouches.
Now you guys will see on this Coyote version,
I've got the newer Marine Corps canteen pouches.
But I opted not to use those on this because I wanted to keep this OD.
And I already had a bunch of Alice canteen pouches.
And Alice canteen pouches work.
They work just fine.
There's no need for me to go out and buy new stuff
when I already had something that would work just fine.
The only thing you need to get Alice to work in conjunction
with Molly Powell's type webbing
is you got to get these adapters,
which you can go on eBay and find those.
They're really cheap guys.
Not much, not very expensive at all.
You get those adapters.
And then that enables you to use any Alice equipment
on your Molly equipment, okay?
In the back here, on this back panel.
So if you are going to run this back panel like I am,
I was able to put a butt pack.
I like butt packs because I like to carry certain things.
Regardless of the mission, there just seems to be...
There's always standard equipment that I like to carry
on virtually every type of mission,
regardless of what it is.
And on that, I like to keep a spare field stripped MRE.
I like to carry a poncho or like a Gore-Tex top,
rifle cleaning gear, things of that nature.
I like to keep them in the buck pack.
So they're always on my gear, always neat there.
Whatever the case may be,
whatever might happen, I have that equipment
and a butt pack is perfect to fit that type of stuff, okay?
Attached to the butt pack on my right side of the butt pack
is just a standard IFAK, okay?
Alice style IFAK.
If you use an Alice style butt pack,
it's gonna have the Alice clips on the sides anyways, okay?
So you don't need any type of adapters.
So, and then you guys can see I took some small carabiners
and attached them to the,
what normally would have attached to Alice suspenders.
That's how I rigged that up.
Moving on, again, another Alice canteen pouch on that side.
Then I have, I always like running a dump pouch.
Dump pouches have been very handy for me over the years,
training at One Shepherd,
whether that's just throwing a camera in there
or something else.
I've always enjoyed having these larger dump pouches,
particularly the ones that can just be folded up like this.
Very similar to the issued Marine Corps one,
which I'll show you on the Coyote version of this gear.
But I always like running dump pouches, guys,
and particularly the large ones.
I know there's like the little small net ones and stuff.
I'm not a big fan of those.
I like these bigger dump pouches.
So that's what I'm running on here.
Right above that, I've moved the tourniquet there.
So now it's on my left side.
I know I can reach this with both hands.
I think this is gonna be a good spot for it.
And I'm gonna try running it here and see how I like it going forward.
So that is pretty much the gear in a nutshell.
So I have the OD one for One Shepherd.
And then I got the Coyote one for Winter Forge.
And you guys can see right now that is set up the exact same.
I got my MDG pouch.
Okay.
See, this pouch is holding my PVS-14s.
Same style of rigging up for dummy cord.
Same magazine allotment.
All right.
Here is the Marine Corps issue dump pouch.
All right.
Got it set up over here.
Right above that, it's a tourniquet.
Grenade pouches on the H suspenders.
On the back, again, a Camelbak holder.
Now, this was a MOLLE butt pack.
I know guys have routinely asked me, where can they get this butt pack?
And I believe I bought this off OpticsPlanet, but it was years ago, guys.
I don't know what company is.
Figure it out.
Look for it.
That's what I did.
That's how I got it.
So looking for the gear itself is half the fun.
Okay.
But it's kind of an Alice-style butt pack, but with MOLLE.
On one side, I've got a smoke grenade pouch.
And then the other side, I've got my IFAK attached to it.
If you guys want to see this gear in more in-depth on how this is packed out,
watch my three-day reconnaissance video that I did not too long ago.
And you'll get a more up-close look on how this gear is all situated for a specific three-day
recon mission.
Well, that's it, guys.
It completes my overview of this Eagle Industries H-Harness.
And as you can see, I've gone to great lengths to make sure that my web equipment here mirrors
each other, so that regardless of whether I'm wearing my OD variant or my Coyote variant,
it's the exact same.
It feels the same.
It looks the same.
All my gear is situated the same.
And that way, it's just a matter of transitioning gear from the time of year.
I would use this web equipment during this particular time of the year when it's very,
very green out.
Then I'd transition to this in the fall and wintertime where the vegetation's dead and
there's a lot more tans and browns.
So if you guys got any other questions, post them in the comment section.
I'll do my best to answer them.
I've done a lot of videos, guys, over the years.
Many of your questions are probably already answered in a review video that I've already
done, okay?
If you want to see specific gear loadouts on these particular web equipments, check out
the three-day recon video I did not too long ago.
And it gives you a little bit better idea of what is carried in this web gear for a
three-day reconnaissance mission.
Also, obviously, I wore this for the short film, The Recon.
That's the name of the short film.
Check that out.
You guys can see how the gear looks and how it sits on my body as I move.
So I appreciate you guys tuning in.
Thanks for watching, and I'll see you next time.
