It's been a while and we know you've missed this lovely object on it's journey to becoming a better version of itself... Join conservator Verena Kotonski for this next instalment of the epic conservation project that is the Sherborne Cartonnage.
In this episode we'll introduce two new characters to our roster of world class conservation experts. Barbara Wills and Helene Delaunay join the project to help shape, glue, stretch, glue, paste and glue every inch of 'Sherby'. You'll also get to witness curator John Taylor see the object after a nine month hiatus, and he is as amazed by the progress as you will be!
The conservation and the making of this film was generously sponsored by the John S Cohen Foundation.
Hi, welcome back.
Episode four of conserving a Sherborne cartonnage.
Gosh, it's been a while, hasn't it?
Thank you for your patience.
Also, thank you for all your lovely comments
that you've left on the previous episodes.
It really means a lot to hear
that you're actually enjoying it
and that you take the time to actually write as well.
That's quite sweet.
Episode four, we have a lot to catch up on on this episode,
but before we carry on, I'm going to do something radical.
Episode four, I'm going to introduce some new characters.
So yeah, I know that is quite, you know, quite out there,
but I'm sure you can cope.
The conservation of the cartonnage was in full swing
when the COVID pandemic hit
and we all had to go into lockdown.
This obviously put quite a break
on the work on the cartonnage.
So when we were eventually,
when we were able to go back to work and in the museum,
Verena asked two of her colleagues to join her.
Barbara Wills is a senior conservator
with decades of experience
in conserving ancient Egyptian artifacts.
I actually made a film with her in 2016
about the conservation of a crocodile mummy.
And you might want to have a look at that film afterwards
because it's a good one.
Well, it's a great object.
Film's okay.
But anyway, go and have a look.
Helene Delaney is also a conservator
who specializes in painted surfaces.
And I made a film with her actually in 2016.
She was checking for pests on a new acquisition
that was coming into the museum.
Really interesting film,
lovely piece of work by the South African artist,
Carl Nell.
So have a look out for that afterwards.
Not to kind of gas on for too much longer
because we've got a lot to get through in this episode.
So yeah, let's hear from Verena.
Over the past few months,
we carried out a huge amount of work on both base and lid.
As conservators, we are quite used
to working on delicate objects,
but this cartonnage really turned out
to be one of the most fragile and challenging objects
we've worked on in quite a long time.
I worked quite intensely on the top half of the base
with the aim to reconstruct the head end
and also the right-hand side.
These areas have been severely damaged
and were partially collapsed
with the textile layers completely disrupted.
Before I could even think of reconnecting
the various break edges,
I had to first carry out a large number of repairs
within each single layer.
Quite often, this felt more like keyhole surgery
as I had to start with repairing the lower layers first
and then gradually work my way up to the top.
And the extreme brittleness of these textile layers
meant I had to work very, very carefully
in order not to cause any damage
while trying to insert these repairs.
There are a huge number of repairs
hidden between these layers.
I've transferred the base onto this Perspex sheet,
which is raised so that I can monitor the exterior
with the painted decoration while carrying out these repairs,
basically make sure everything is lining up neatly.
Once the individual layers are stable enough
for me to handle, I can then try and match the break edges
and see how it all fits together
and where certain fragments might go.
And it's really a very fragile 3D puzzle.
It's certainly a great moment
when suddenly everything lines up and all makes sense
and the original shape suddenly emerges.
If we've really come quite a long way,
the base is finally in one piece,
which is a bit of a milestone.
I must admit, for quite a long time,
I wasn't sure if it would be possible at all
to join all three fragments.
But after working my way up and down the object many times,
carrying out a huge number of repairs,
I obviously became more and more familiar with the object,
but also how the object responds to my interventions.
And in addition, I've become more confident
in the stability of my repairs
using Japanese tissue paper and Clusel G.
I eventually decided to give it a go
and just try to join the sections.
The parts are basically connected
using heavy-duty paper tabs,
which I was able to insert
in between the original textile layers.
And in addition to these tabs,
I've been filling any gaps also with Japanese tissue paper.
And I deliberately left the edges of the paper fibers,
pasting them over the edge of the original textile layers
in order for the fibers to give that additional grip
and strengthen the joint.
I've used this technique also in a number of other areas,
mainly here joining any breaks in the sidewalls
and also reconstructing the foot area.
Just a little time-passing interlude from me.
The conservators, all three,
carried on working on the base and the lid at the same time.
So Barbara was really focusing on the foot case
and the face of the lid.
Elaine was stabilizing the interior of the base,
really doing all the repairs inside.
Verena was backwards and forwards
between the base and the lid,
doing all the major structural repairs.
In a way, I suppose you can say
that the work that they did on the base
was almost like a prelude or a warm-up
for the work that they then had to do on the lid,
because the lid is just so much more complicated.
It's a much more three-dimensional object.
And so therefore, just much more complicated.
And also, I just wonder if we can just take a moment
to do a little bit of lid appreciation,
because this is what it looked like
when it first came into the studio.
And I just wanted to kind of remind us of that,
because it's a bit like me on a Friday afternoon, actually.
But yeah, it had this major pleat
right in the middle, around the hip area,
where, because the cartonage had been kept
in an upright position,
it started slumping under its own weight.
So that was not very good.
And I think I'll let Verena tell you
how she dealt with this.
I basically needed a support
that can be adjusted easily
throughout this lengthy treatment step.
And here you see the articulated wooden frame
with the cardboard arches.
The height of the arches and the width of the frame
can be adjusted while the lid is slowly taking shape.
After a few weeks of gentle stretching,
there came a point when there was one final push required
to really undo this pleat.
And with the help of my colleagues,
we introduced additional moisture in this specific area
using an ultrasonic humidifier.
At the same time, we carefully pulled the lid
on its support frame to unfold the cartonage.
It was really exciting to see
that the painted decoration was actually quite intact
in spite of this major deformation.
With all hands on deck,
we were also able to finally lift the lid
off the historic mount
and we moved it back into the tent for further reshaping.
Here we see the cartonage
after some significant reshaping has taken place.
The big pleat in the center is gone
and I was able to regain the shape of the head end
while Barbara was focusing on the foot case.
We are basically etching closer
to what might've been the original shape,
but we've now reached a point
where it will be really valuable to hear John's thoughts
on what he thinks the original shape might've looked like
and also what we should do in specific areas,
for example, the chest and shoulder part or the face.
Hello John, hi.
Hi.
It's been a while.
It's been certainly nine months
since I've seen the cartonage.
Yeah.
And I must say, it looks amazing.
It's totally transformed from what we saw
when it first came into the museum.
Yep, yeah.
I keep looking back at our pre-conservation photographs
to just to remind myself where we've come from.
And of course now we're getting to the stage
where we're really trying to find that original shape
and it will be really valuable to have your opinion
where you think we should go in terms of shape,
because I realized when looking at the original photograph,
it seems like it's quite a box shape,
but of course we see the object in its sarcophagus
and there are some shadows.
So I wondered, yeah, what your first impression is
in terms of overall shape.
Well, I think the overall shape looks very faithful
to what we see in the photographs.
And the amount of curvature that you see in the surface here
is what we know from other mummy cases.
I think already, you know, you're getting quite close
to what the original appearance would have been.
It's great to see that the foot is now
more or less its correct shape,
whereas before it was bent over and flattened.
And immediately you start to be able to read
more of the decoration,
which we just couldn't see at all before.
And I think at this end as well,
the shape is looking very good.
It's got the three-dimensional quality
for the head, the wig, the face,
and the gradual tapering down towards the leg.
I kind of might've expected that at this point
where the end of the wig comes,
there could have been a sharper kind of distinction
as you come into the body, coming down a little bit,
but it's possible that that was never part
of the original conception,
because it's interesting that the way
that the bottom of the wig is painted,
it goes straight from the wig into the collar.
Yes, yep.
Whereas on some others that you see, other examples,
you can tell that the bottom ends of the wig
had a more three-dimensional shape,
but actually the way it's painted,
that probably never was the case here.
You're probably already pretty close
to how it originally was.
The other question I had was around
the shape of the shoulder.
For example, on this side, it's fairly box-shaped.
On the other side, you have a more gentle curve.
So I was wondering, what do you think
we should be aiming for?
Okay, if I come around here, I'll have a side.
I think this is where we probably need
to look at the photographs, the excavation photographs,
to get a sense of how that was proportioned before.
Yes, we're looking at this photograph
where it's still lying in its sarcophagus.
I agree with you that the front surface looks quite flat,
and it looks as though where these borderlines are,
there's a sort of angle almost coming down the sides.
So I suspect that probably there is some scope
for bringing that further down.
I think particularly here, I mean,
obviously this part is more distorted,
but maybe using the width of the foot case
as a guide to start,
clearly this part should go in more.
Perhaps a little bit further up here as well.
But I don't think we want to go too far.
Nice to see John again, isn't it?
Imagine not seeing him for nine months
and then coming back and seeing that much changed.
It's just incredible.
It must be so nice.
Yeah, so that was really cool.
Not sure when the next episode is going to come out,
but if you subscribe to our YouTube channel,
I'm sure you will be notified of the next installment.
And also going to introduce a new segment
because new characters mean they have to have subplots
and all of that.
So new segment called Repairs with Barbara,
and we will be looking at that next week.
I keep saying next week.
I don't know if it's coming out next week.
It might not.
I don't think it will.
There's no way that it's going to come out next week.
Soon, soon.
It's going to come out soon.