DOLLAR TREE VS CRATE AND BARREL | *BRAND NEW* DIY DOLLAR TREE HIGH END DUPES ON A BUDGET

Decor with Me
7 followers
Who doesn't LOVE a HIGH END DUPE? You guys have been loving the THRIFT STORE CHALLENGE SERIES, so I thought why don't we head over to DOLLAR TREE and come up with some really beautiful YET AFFORDABLE high end dupes from one of our favorite high end stores like CRATE AND BARREL! Some items are GREAT as they are or simply need a DIY adjustment that can be done EASILY AND AFFORDABLY. The anthem of this channel is to always strive for high end decor at a price point we can afford, right? Be sure to tell me which items would definitely make YOUR list in the comments below! Until next time,
#DIY #DOLLARTREEDIY #DIYHOMEDECOR #DIYDOLLARTREE
Today's video will be a Dollar Tree challenge and we are headed to
Crate & Barrel to get loads of inspiration and then we are headed over to
the Dollar Tree to see what we can DIY for a whole lot less.
With that being said, let's go ahead and get started.
For the first project, one of the pieces that I really loved this time around at
Crate & Barrel was from the Athena Calderon drop,
which was these tapered candle holders. I thought they
looked really organic, but they were also really minimal and
modern, but they are also almost $80. So first I went to the hardware store. I
picked up two of these pipes here for $0.62 a piece.
You can of course use bowls from the Dollar Tree, but I ended up finding these
ones at the thrift store for $4 for a set of
three of them and I'm only going to be using two for this project.
So step one for this project is going to be to glue these pipes down to the
middle of the inside of these bowls and to do that I'm going to use
super glue gel just to make sure I have a nice good secure hold.
Once those two pieces were unified, I then brought it out to the garage for
some spray paint. I'm going to use this multi-colored textured spray paint by
Rust-Oleum. It's a lot more subtle than the stone
spray paint you guys have seen me use and I think it was the perfect spray
paint for this specific project. Once the textured spray paint had began
drying, I then went over it with some ultra matte spray paint by Rust-Oleum
in the color Down to Earth and once that dried, I went over it with a
matte clear sealer. For the pedestal component of this
project, there's probably a lot of things you could use
from Dollar Tree, but I ended up going with this one here.
I think it just had a nice kind of severe angle just like I had seen at
Crate & Barrel, so now I'm just going to super glue gel
the bottom of the bowl to the top of this candle holder and then I'm going to
apply the same spray paint technique to the base.
And that really wrapped up this project. It only cost a few dollars to make and I
think I have a really similar look on a budget.
Moving along into wall art, so Crate & Barrel has a lot of beautiful options
but they're oftentimes really expensive. For example, this piece
of wall art costs almost $300. While you won't be able to find that
exact thing at the Dollar Tree, what you will find are these
pre-cut pieces of wood here. So here's me at Dollar Tree looking like a crazy
person laying out kind of the orientation of
what I had in mind. I ended up purchasing 10 pieces in total
and then I just placed it on the back of a frame that I already had just so I
could get an idea of spacing and then I pushed all the pieces
together so I would be able to kind of see where I would need to join all the
pieces. So I just grabbed a ruler and a pencil
and made my markings all the way around this piece so I would be able to know
where I was going to need to drill on each side.
I used a 1 16th inch drill bit and I drilled
directly in the center of each of the sides of these wooden pieces and then
for the wire you can obviously use something from Dollar Tree but I just
wanted to use something that was sturdy and something I already had
so I'm just going to take the wire from these old hangers and I'm going to use
that to connect the pieces. I cut each of the wires about two and a half inches
long allowing for there to be space to
actually go inside of each wooden piece. Then I'm going to take some 220 grit
sandpaper and just sand out all of the rough spots and the pencil markings so
that way I have a smooth surface to stain on.
With all of the surfaces prepped now I'm just going to take this stain by Minwax.
It's a gel stain in the color coffee. I'm going to take a paper towel and I'm
going to stain all of the fronts of these wooden pieces. I ended up
splitting this piece in half so I did the bottom half and then I worked on
the top half. Once both of those were completed
then now it's just time to connect them together. So I'm just going to take my
wires again using the holes I had drilled and
connect them with a little bit of super glue gel on
either side of the wire. Finishing the edges off with a little bit of dark
brown paint and this was the end result. Moving right along into the glass home
decor you can find at Crate & Barrel. So a lot of it is kind of larger in scale
which is something you probably won't find
necessarily at the Dollar Tree. You would more probably need to go to the thrift
store to find something similar for that. But there are some smaller pieces that I
think could really replicate things that you would see at Dollar Tree. So for
example these long stem glass tea light
candle holders are just $1.25 a piece. I actually picked mine up at the
thrift store for just 30 cents though and I'm going to just slide it in one of
the hurricane vases also from the Dollar Tree.
A similar look from Crate & Barrel can cost almost 10 times that price
so I do think it's better especially if you have to buy multiples of things like
the hurricane vases. Just go to the Dollar Tree because they
look so similar to anything you would find at Crate & Barrel.
So for the smaller one you can just keep it super simple. Add some water,
some pretty roses, and you can have a really chic look
but it was so budget-friendly. Another combination I really like is to do the
fishbowl vase with the fluted glass tea light holder inside and I think
again it just makes it feel a little bit more substantial,
a little bit more high-end, but so budget-friendly. A material you'll see a
lot of at Crate & Barrel is plaster and stone. So I love this
lamp here but again it was quite expensive. So from the Dollar Tree I
grabbed two napkin holders and I'm going to also grab four packs of
these dowels here. The reason I ended up grabbing these ones is because
they are just long enough to kind of cover the interior of what will be this
pleated wall sconce. So the first thing I did was I just
grabbed some zip ties also from Dollar Tree
and I'm just going to attach these two pieces together so I have a place for my
puck lights to sit inside of. Now it's time for our dowels. So I'm
just going to actually take hot glue for this project because I think it's going
to be strong enough until I can get my plaster on there.
The trickiest part with this project is just making sure that all
of these wooden dowels are as straight as possible. It's not going to be perfect
but if you can get them to line up just right it will
provide a better look in the end. So I'm just taking my time with this step and
making sure that all the dowels are straight.
Starting off with some white spray paint that I just had on hand and I'm just
going to spray the whole thing down. Once the white spray paint had dried I
then went in with some stone spray paint. Again this is just to add additional
texture. That's what you'll see of a lot in these high-end stores there's just so
many layers of texture. So that was fine but I wanted to finish
it off with a little bit of spackling mixed with
some acrylic paint to give it a more plaster-like look
and also fill in some of those gaps. So I just basically got it to the
consistency that would be like marshmallow fluff that you'd buy at the
grocery store. I had my assistant help me out here and
he just finished off the project for me and
this was the end result. A home decor piece you will see
repeated throughout Crank & Barrel are decorative trays. So they have metal and
stone, wood trays, leather trays, but we can
create this look on a super tight budget. So from a
garage sale I got this frame for free. It was actually broken
so I just tried to put it back together as best as I could with some super glue
gel. I'm going to spray paint it with a flat
black spray paint. Gave the frame a few coats. You do want a frame that's kind of
flat on the top so you can attach handles onto it and I'm going to
then use this wooden plaque also from the Dollar Tree Plus section
that is $3 and the faux leather fabric you guys have seen me use before
also from Dollar Tree. So I just measured how much of the fabric I was going to
need and then I'm just going to remove the excess so I'll be able to just hot
glue the perimeter of the fabric which is what will be covered by the
frame kind of sitting on top of it. And for the handles I'm going to use
some leftover hardware that we had when we did our kitchen renovation and I'm
just going to super glue gel those on to this tray and this is the end
result.
As I mentioned earlier, stone, plaster, all of those materials kind of keep
repeating themselves throughout crate and barrel which is very
fitting for that modern design aesthetic. If you happen to watch my last video
you'll see that I used these white stones from the Dollar Tree and attached
them onto this thrifted mirror and I think it just completely
transformed the look of this specific piece.
Now obviously you're not going to find a mirror this size at the Dollar Tree but
you can kind of tailor it to a smaller scale and make some really like
interesting pottery. So all you need for this project is
some spackle from the Dollar Tree, any glass vase you want.
So for this project I ended up using this vase. I think the shape just worked
a little bit better overall and I worked on the top first, let that
dry so then I could flip it upside down and work on the bottom.
So we are just going to start off by applying a lot of spackle
onto this glass vase. I would say you just want it to be about a fourth of an
inch deep so then that way your stones have a place to kind of sit
inside of. I love that this project doesn't require any hot glue especially
after the last video I showed you. That was a very
time-consuming experience so this was just nice and easy. It was so quick. I was
just able to kind of push these in there and because this spackle
has almost like a stone-like look it's a lot easier to disguise if you've missed
a spot or you know if a rock's just not sitting
in there perfectly. Stone vases from high-end stores can cost a ton of money
and you can create something like this for just about four dollars.
Next up we are going to make a pleated wood vase.
So from the crafter square section I picked up three packs of these
wooden planks here. I liked these a lot. These were ready for paint or stain,
whatever you wanted to do, and then I also grabbed the smaller of the sizes of
the hurricane vase. So to start with this project I'm
actually just going to spray paint the hurricane base. Now the first spray paint
I used was just a little too orange so then I went over it with some dark
brown spray paint and that worked out a little bit better.
While the hurricane base is drying it's just time now to apply our stain.
Again I'm going to be using that same one that we used in the second project.
It's a gel stain. It's just less messy. I feel like you have better control over
the stain that you're applying. I applied stain to the fronts, the backs,
and the sides and then I sealed all of them before we attach them on
to the hurricane base. To attach these I have really bad luck with hot glue and
glass projects so I'm going to use super glue gel here.
Doing my best here to just keep the super glue gel just to the edge there so
it doesn't make a mess on the hurricane base.
And I just worked on opposing sides just to make sure everything was kind of
evenly spaced out as best as possible. And this is how the pleated wood vase
turned out. Last but certainly not least are going
to be our iron candle holders. So from the Dollar Tree you want to grab
the circular shape of these kind of cement holders
as well as one of these kind of cheapy metal tapered candle holders.
So the reason I don't like these by themselves is just they just feel not
substantial. They don't feel high-end so if you add this little base there with
some super glue gel I feel like it just makes it feel
a little bit more heavy duty, a little bit more high-end, and it was only two
dollars and fifty cents. So for the kind of iron-like look I like
to use this one by Rust-Oleum that we used in
the first project. I'm just going to apply that
all over this tapered candle holder and then I'm going to go in
with some flat black spray paint to again
just give it this iron-like look. I went ahead and let that dry
and then I sealed these and this is how they turned out.
I think that this is just such an easy project that anybody could do
and for a set of two of them it cost just about five dollars.
And that about wraps it up for today's video. Thank you guys so much for
watching. I hope you liked the projects today. Let
me know down in the comments which one was your favorite and I will
see you guys in the next one. Bye for now!
