I Forged a Custom Axe for @ErikGrankvist

Traditional Metal Crafting
21 followers
7 Video Views·Mar 5, 2025
In this video I am going to show you how I forged a quite unique hewing axe/adze for Erik Grankvist. I also had the pleasure to go and visit him at his cabin where he tried the tool out.
Hope you enjoy the video :)
In this video I'm going to show you how I forged this very special kind of hewing axe.
Or maybe I should say hewing adze.
An adze is a tool very similar to an axe but the blade is usually at a 90 degree angle from the
body. This lets you work from different angles than a regular axe. I start by punching a hole
that soon will become the eye of the adze. To enlargen and shape the eye I use a drift and
then I draw out the lugs or ears as I like to call them on my power hammer.
Before I start working on the blade I want to make a set down between the blade and the eye.
This will make the transition to the blade much easier. I then begin forging down the blade
section using a rounding die on my power hammer. The idea is to move the material sideways to get
a wide blade. To further move the material in the sideways direction I clamp the blade in my
vice and I use my hammer to upset the material. This method also helps me draw out the section
between the eye and the blade of the adze. I keep moving back and forth between the vice and the
the eye has the correct shape. After I'm done with the first forging section I now take some time to
grind the adze. I use my vice once again but this time I use it to bend the ends of the blade.
I quench the blade in water to make it hard. After that I temper it in the oven.
Due to the shape of the blade I chose to hand sand the primary bevel.
To make it easier for the woodworker to sharpen the adze I chose to grind in a secondary bevel.
