Construction of the Chemise

Pre-modern Women's Fashion
182 followers
50 Video Views·Mar 2, 2025
The construction of the Chemise/Shift.
I am sorry this took so long to upload! Thank you all for your patience.
If you would like to know more about the chemise and want more instructions on making your own I recommend you check out this amazing website!
http://www.sharonburnston.com/shifts....
♥ If you would like to see more from me please subscribe ♥
Hi guys! Welcome back to Enchantimous Costumes.
So this video is all about the construction of the chemise, and I hope you enjoy it.
Also, stay tuned to the end for a little announcement.
The only paper pattern I used for the chemise was the neckline.
Everything else was drafted onto the fabric.
My measurement for the body of the chemise was 30 inches wide by 92 inches long,
or 46 inches from the shoulder to the hem.
To create the gores for the pattern, I measured 6 inches in from the shoulder seam,
and 20 inches up from the hem,
creating a diagonal line from those marks.
I then cut out the gores and set them aside to save until later on.
The final step in prepping the body of the chemise is cutting out the neckline.
I found the centre and marked it out, and then laid out the template and cut around.
Something I forgot to do with the template was to give myself an extra quarter inch seam allowance,
which is why I removed it and then cut the neckline.
I cut two 4 1⁄2 by 4 1⁄2 squares for my gussets from the leftover fabric from my neckline.
Out of my remaining material, I cut two sleeves 28 inches by 14 inches.
And from my scraps, I cut two cuffs 2 inches by 10 inches.
With everything cut, I had the body of my chemise,
two sleeves,
four gores,
two cuffs,
and two gussets.
To begin the construction of the chemise,
I laid the gores right sides together onto the chemise body.
I pinned the gore a quarter inch away from the body of the chemise fabric,
so I would not have to trim as much away when I felled the seam.
Here you can see the difference in the seam allowance.
I then concealed the raw edges in a felled seam on the inside of the chemise.
And then repeated the process on the other three gores.
This is all four of the gores sewn to the body.
Moving on to the sleeve, I sewed a quarter inch turn and turn hem on the side of the sleeves,
three inches away from the bottom.
I then pinned along the rest of the seam,
leaving a four inch gap at the top for the gusset.
Continuing with a half inch seam allowance, I sewed in the gusset,
making sure to stop before I reached the other seam.
To sew in the other side of the gusset, I flipped the sleeve over
so I could see where my other stitching line was.
Moving on to my ironing board, I pressed the seam open
so I could trim down the seam to a quarter inch.
I made a small slit in the seam allowance so I could complete my felled seam.
And then repeated the steps around the sides of the gusset.
After completing the pressing, I moved on to stitching down the felled seams.
Once the gussets were complete,
I moved on to gathering the bottom end of the sleeve to fit to the cuff.
Once I had attached the sleeve to the cuff,
I trimmed away the excess fabric before finishing the cuff.
I finished the cuff with a slip stitch on the inside of the sleeve.
After completing the sleeves, I then went back to the chemise body
and finished sewing the side seams with a felled seam,
making sure to leave a ten and a half inch gap from the top for the sleeve.
I then gathered the sleeve to fit the opening, leaving the gusset ungathered.
Starting in the gusset of the sleeve,
I sewed around, making sure that the gathers were even as I sewed.
I finished the sleeves off with another flat felled seam.
I finished off the chemise with a quarter inch seam around the neckline and the hem.
Hey guys, I hope you enjoyed the video.
So my little announcement is that I am pregnant and I'm due in March.
So because of that, I have decided to postpone the actual Roa LeFrance dress
until after the baby is born because it won't really fit right now.
I still plan on doing the shoe and stocking videos.
So I'll talk to you guys soon and have a good one!
