#sewyourstash If you've been dreaming about cottage core fantasies, then watch this Renaissance Chemise tutorial to learn how to make your own and bring your cottage core dreams to live. This Chemise was modeled after a genuine Renaissance chemise on record, so this is the pattern you want to follow for historical accurate Renaissance cosplay
Use a minimum of 4 yards of white fabric for your chemise. Linen and hemp are the most traditional materials to use, but you can also use cotton or silk. I used 34" narrow fabric for mine, but you're welcome to use a wider fabric if you prefer a more voluminous chemise
This Renaissance chemise is perfect for the challenge because it uses up so much yardage and is a great project for white or off-white fabric. So go on--go make yourself a chemise!
AI Generated·May contain errors
Video Summary
AI Generated
Christine provides a comprehensive tutorial on sewing a Renaissance-era chemise, a foundational garment for cottagecore and historical cosplay. She covers everything from fabric selection and measurements to the technical assembly of gussets and the final hand-finishing of the neckline and hems.
Have you been having cottagecore dreams again?
My name's Christine and today I'm going to show you how to make a
renaissance era chemise so you can bring your cottagecore dreams
to life. You will need a minimum of four yards of white fabric
for your chemise. Renaissance chemises were traditionally made with hemp
or linen but you can also use cotton or silk.
I will be using some linen that I inherited from my aunt
and this is a great project for the sew your stash challenge that I'm
participating in this year because not only does the chemise take
up a lot of yardage but I'm not going to use white for much
else. My fabric is also pretty narrow at 34
inches wide so if you want a really voluminous
chemise then make sure you buy a wider cut of fabric.
You will need two measurements for your chemise. Measure how long you want your
sleeve to be. I'm going to start with 28 inches and
then hem it up if I need it to be shorter.
You will also need to measure the height of your chemise.
Now renaissance era chemises are anything below
the knee but mid-calf is best. I will need right around a yard of fabric
for a mid-calf chemise which is perfect because that's all the fabric I have.
Well let's go make a chemise. Start by cutting out two sleeves
across the whole width of your fabric. Then cut a 10 inch wide
panel off the length of each sleeve but if you have enough fabric you can
keep the sleeve the same width and use a different
piece of fabric for this 10 inch wide panel.
You will need to make a pair of 10 by 10 inch
squares for gussets out of these 10 inch panels.
You will also need to cut strips of fabric that are one and a half to two
inches wide to use as binding later. The remainder
of the fabric will be used for the front and back of your chemise.
You can cut it to the right length now or you can hem it later.
I'm going to make this project a little easier on myself by finishing the raw
edges of the gussets and the length of the sleeve now.
To do this you can simply turn the edge of your fabric and sew a zigzag stitch
along that edge but if you want to use a more traditional method that would have
been used during the renaissance era you can
wait until your chemise is all sewn together
and then fell your seams afterwards. You will also need to
hand sew everything rather than using a machine. You will have two sleeves,
a front, a back, and two gussets. A gusset is a piece of fabric that sits in
your armpit to help reduce strain on your garment.
Your gussets are the key pieces to this pattern because you're going to sew both
the sleeves and the front and the back to your
gussets. Lay the front of your chemise out flat
right side facing up. Place your gusset right side down
and line it up with the side seam. Then overlap your neckline the same amount
as your seam allowance. Then sew your gusset to your chemise
using a straight stitch and do that on both sides.
The bottom and top edges of your gusset should be free
from stitches. Unfold your gusset so the right side is facing
up. Line the top of your sleeve up with the seam you just sewed.
Pin the side seam of your sleeve right sides together to your gusset
and sew along that line and only sew to within a seam allowance
width of your gusset. Lay your chemise out flat
right side up and fold the corner of your gusset up to form a triangle.
Lay down the back of your chemise and pin the side seam together.
Fold back the seam allowance of the gusset when you pin it to
the back and make sure the top of the gusset
overlaps the back just a little bit. When you get to the Y
seam, stop your stitching, fold the seam allowance
over, and then restart your stitching on the other side.
And you probably guessed this next part. We need to sew the sleeve
shut. So fold back that gusset just a little bit,
fold your sleeve over, and pin down the length of your sleeve.
And sew this Y seam in the middle the same way we did the last one.
And now you can try your chemise on. Well, kind of.
At this point, you'll need to either gather or pleat
your neckline around the front, the back, and
the shoulders to make sure it fits you properly.
If you use a measuring tape, you can get a better idea of how much you need to
pleat or gather your fabric. And you may need to make slight
adjustments later. I am generously gathering my chemise by
hand and I am gathering each of the four
parts separately. After gathering the desired
amount, I tie it off and release the gathers
evenly. You want to make sure you have full
range of movement when you're adjusting your chemise.
Now it's time to break out those two inch wide binding pieces we saved
earlier. We're going to iron them in half
and then in quarters, just like bias tape.
Fold it in half one more time and you'll have about a half
inch wide binding. Open your binding up all the way and pin the top edge to the
neckline of your chemise, right sides together. And leave a
comfortable triangle of binding on each corner.
Then clip and overlap your edges when you get to the back.
Now sew your binding onto your chemise using the first
crease in your binding. Turn your chemise to the inside
and fold your binding over. And you may need to clip your corners to
get them to lay down flat. And it's best to sew your binding on by
hand so it's not visible from the front.
Gather your sleeve to the same width as your forearm.
You need to be able to move the sleeve on and off your hand
and if you gather your sleeve to the same width as your wrist,
you won't be able to do that. And we're going to bind the sleeves the same way we
did the neckline, so make sure you have enough binding
left over. For the hem, I double folded it with my iron and I'm
going to hand sew it with a running stitch.
And that is how you make a renaissance era chemise.
But a chemise is underwear, so I should really put something on over the top.
Well, this skirt is the wrong type. This bodice is a little too small
and I don't have a snood for my hair, but this is definitely much better.
It's been about 10 years since I had full renaissance garb.
Actually, it's been over 10 years. And this chemise is the
first step in recreating that renaissance outfit that I had back in
high school. I won't be involving myself in any more
renaissance fairs going forward due to multiple reasons,
but I do want to get back to wearing full historical renaissance cosplay
clothing because it's really fun to wear.
And I want to show you guys just how easy it is to make your own historical
costumes because I know that's a reason a lot of you got into sewing.
I do have some fabric to make a skirt with, so that will probably be my next
renaissance themed project, but I'm going to hold
off on that for a bit because this chemise was a
lot of work. I was up until 3 30 in the morning last night
finishing all the hand sewing on the binding and the hems.
And this chemise took about three days to make
rather than the two I was originally projecting. The most
frustrating part was trying to gather the neckline and the shoulders because
every time I tried it on, the stitches kept pulling apart and I
had to start over and it was such a pain. But all that
frustration was definitely worth it and I'm really glad
I made this chemise and I think it came out better than I
was hoping it would. I mean it looks like a historical
renaissance chemise is supposed to look. And I did even get a little bit outside
of my comfort zone with this project because I don't normally work with or
wear white. Ultimately I had fun with this
project and that's really the only thing that matters.
So if you want to have fun making your own chemise, let me know down in the
comments how it turned out. And please leave a like on this video
if you haven't already. And I hope you will subscribe to my
channel so we can go on a renaissance clothing
making journey together. Thank you so much for watching this video everyone.
I will see you guys next week.