We just made this Spring Tabletop Stander using Canva and xTool Creative Space, and in this video, we’ll walk you through exactly how we did it! 🌸✨
We love designing home decor projects, and while Adobe Illustrator is our go-to for laser designs, we constantly get asked: 👉 Can I design laser cut files using Canva and Creative Space? So, we put it to the test with this fun layered Spring home decor piece that’s perfect for your entryway, mantel, or tabletop!
💡 TIMESTAMPS: 00:00 Intro 01:45 Can you use Canva for laser designs? 03:30 Setting up files in xTool Creative Space 07:15 Cutting the design on the xTool P2 09:40 Painting & assembly with Foxy Hues Paints 12:10 Final thoughts & tips!
Big thanks to our amazing Patreon community – you guys make videos like this possible! ❤️ Let us know in the comments what project we should test next! 🚀
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
we just made this spring tabletop
Stander using canva and creative space
and we'll show you how we did it right
now what is up welcome back you like to
do a builder or make it so do we and we
have new videos each week our goal this
year was to test more home decor items
so we love our door hangers our porch
leaners our porch posts we love them
those are our bread and butter yes and
we have people come to our workshops who
want more they've done all the door
hangers and now they want to bring it
inside and add some more home decor
items so we're going to work on
designing some of those this year and
this is our first take we're going to do
a little spring home decor standard that
you can put in your front entryway your
mantle your table pretty much anywhere
it's a small little guy perfect for any
place in your home a question that we
get asked a lot is can I design laser
cut files using canva and creative space
or light bur let's find
out step one we're going to gather all
of our supplies we needed some 1/ Quin
mbf this is going to be our backer the
foot and all of the top pieces we're
going to use our foxy Hues paints to
paint everything these are perfect
spring poppy colors to paint this kind
of project we're going to need something
to bring it all together we're going to
use a little bit of starbon
thick and that is it step two we're
going to make our design we're going to
find out if we can actually make a
design and a laser cut file using using
canva and creative space and this isn't
just any easy little design I would say
this is a medium design cuz it's got
some extra elements to it we have
multiple layers we have letters that are
going to fit inside each other yeah cut
out we're going to use some tabs and
Slots so I'm going to have to check my
curing Kim and I were talking about this
curing tool because I cut a new one when
we got our new material and she was like
you really need to cut a new one for
every new material and I said try to use
this tab in these slots and now try to
use it in the old one and it did give me
two different measurements M two
different measurements so what we found
today is we're using 1/ quarter inch but
the
0.253 seems to give us a little bit of
wiggle and when we add some paint I
think it'll really stiffen up and snug
up in there mhm but you don't have to
cut this whole thing we know we're not
going all the way up here to 23 you just
might want to test out a couple of
slides on your board you don't have to
use the whole piece to see which one is
going to be best for standing your your
standing piece into your base piece
we're going to start over in canva we're
going to get some clip art together
we're also going to get our word and
agree on our font I grabbed some clip
art already and I had a couple of
versions of fonts that Kim had to pick
from but she went ahead and chose her
own
font it was similar to yours but
cuter was it is it okay so to gather my
clip art I would come over to elements
and I would just start with a search so
we'll just say
bird and then I would go to graphics and
I'm looking for birds don't pick one
that moves cuz that's an animated gift
yeah there are a couple of things as it
relates to Graphics when you're choosing
them from canva sometimes the graphic is
a file that you can use that has uh
different elements that'll break down
into into a good SVG for you uh but
sometimes it's just a picture and it's
not really something you can break down
into different elements or you can but
you'd have to image trace it and there's
just a whole lot of steps to that so
you're thinking to yourself Kim how do I
know how do I know if it's going to be a
PNG or an SVG well here's a good way to
know so if I click on my clip art and I
have a little edit button and I can
change the colors it's probably going to
be in layers it means it's probably
going to come out like an SVG mhm but if
I click on it and it just gives me an
edit button you know it might not be
able to make an SVG out of it because
it's not going to allow me to change the
different colors of the different
elements in this particular right it
might be a PNG I'm not sure though and
if I click on it and it says BG remover
well that's a PNG I can't use that at
all that's just definitely a picture
yeah so I'll have to hope that there's
no like like shade or gradient in it and
I'll be able to get a good image
Trace so once I have all of my elements
on my board you notice I don't lay it
out I don't have anything overlapping
because when I bring it in to Crea a
space I don't want it overlapping
because it's really hard to then
separate so I separate all my design
pieces out I'm going to go to file
download we have a bunch of pages in
here but I really only want
I want transparent background but I
really only want this current page that
I'm on right and you notice that SVG is
part of the paid tier and I think it's
the pro account yeah I think they call
it pro so um but you'll definitely want
it's worth it and you'll definitely want
to download it as an SVG I mean we use
the pro account every day every day all
right we're just going to click download
now I'm going to jump over to creative
space
this can be done in lightburn as well as
creative space we're just showing
creative space today because we want to
use a desktop
laser it's a little guy I'll bring my
SVG in that I just exported we'll
display it in original
size and you'll notice everything comes
in with a back or to it hey see there's
my bird that's on group there's my bird
that it said was a PNG it's
PNG I can't use that guy unless I do an
image tra
I don't have time for
that but you'll see all of our other
stuff came in and it came in as engraved
because how did you sh shrink your
screen so fast oh how do if I hold
control and then use my mouse mouse
wheel Little Wheel on your mouse I can
zoom in and out that's carry over from
illustrator so now you'll see most of
these things are in a bunch of pieces
they didn't come over with the colors
that were in the image but they came
over in the colors that you know closest
closely resemble the layer so you can
move them to like Green Layer now it's a
green engrave and I'm going to keep them
engrave right now while I'm working on
it because it's so hard to try to see
all these pieces with just outlines and
to see where they really overlap because
if you change it to cut layer it's going
to take the fill away and you're just
going to see an outline is that way
you're saying yeah and it's a lot harder
to work with like that that's going to
get super hard and super sloppy and the
colors we're seeing on the screen
represent the layers down there at the
bottom left that's what you just said
mhm okay and they're ugly colors but we
can change all of that they are
currently ugly colors but we can change
all
this um but I want to start working with
these guys now and laying them
out so I want to clean up my svgs and
make sure that I can see like move
things to different layers so I can see
where they actually
overlap control Z put it back and then I
want to clean up like this gnome I don't
need all this outline so I can get rid
of the
outlines I just select them and hit
delete drag them out to make sure I'm
deleting the right
thing that way I don't have any double
Cuts
or hidden lines back
there man now I take this guy with all
of his little
pieces and I'm going to group
him same with this bird you can see the
bird has a bunch of pieces so I'm going
to grab everything and then contrl G to
group then group all these pieces contrl
G
contrl G and grab this middle piece
let's move it
to Red
layer contrl
G that's just one
piece and then contrl
G I'm going to do most of my work over
here in the margin because I can't
really see on this black background here
yeah that's showing you the inside of
the laser which is empty right now I'm
just going to start laying out my word
spring trying to stagger some of the
lines or some of
the
words or
letters now I want to try to stagger
these things but I'm going to need like
this p and the I they're going to need
some support so I'm just going to plug
some flowers
in try to plug up some holes like to
support I want this one to support this
s over the r I'm just going to use this
flower in here we'll merge them all
together in a minute I'll use this
flower over here to support the P I'll
use a little flower here to support the
eye and then I'm going to use this
gnome down here to support the end
I think he can be a little bit
bigger and I can right click arrange
bring him to the front so I can actually
see him put this grass down here we'll
shrink it a bit I'm going to right click
arrange bring to front and do that with
all the flowers right click arrange
bring
front now with bird here he's going to
be coming in for a landing on the
P
cute and this guy up here I think he'll
be peeking over the
S being like what's going on why you
coming in so
hot now you going to get rid of those
little feet are yeah I don't want the Fe
okay I was thinking the same thing those
little guys look like they'll burn up
uhhuh
all right what do you think look he yeah
that was quick that looks good let's
change these colors so that I can see
them let's move these all to one one
layer
oops grab all the layers
again and we're going to move them to
the light blue layer there we go
it's looking cute I mean pretty good not
sure I want that gnome in that color but
that's paint for later right yeah that's
they're talking about something
different oh how tall is this thing
right
now this thing is 18 in high let's make
it 11 we'll make it 11 in
tall right let's grab this whole
thing bring it down on my canvas to make
sure it fits fits now if I hold my space
bar now if I hold my space bar I can
actually drag my whole
canvas then I can hold control zoom in
all right so I have them at 11 in he
fits inside my bed everything's looking
good it's actually just shy of 11 in so
now it's time to actually make it a
stander make the cut file and do my
layers so I'm actually going to make I'm
going to select
everything I'm going to copy it copy
let's move this
over I'm going to make two two more
copies of this thing so
one and two so these are my layers this
is going to be my base layer over here
on the left I'm just going to grab
everything I'm just going to do it right
now grab everything and we're going to
unite it all
bam this is going to your backer this is
going to be my back I'm about to add
some tabs on
here and that's it I'll give it tabs and
some feet and this is my backer now this
piece is going to be all of my like
letters and I'm going to need some
supports for the flowers because I want
the flowers to be a third layer so in
that third layer so in this third layer
I don't that's I was going to say the
letters are going away okay don't need
these and the birds are also going to be
on that same layer so I can get rid of
The
Birds And The
Gnome will be a third
layer part of the third layer so we'll
keep him and the grass okay so all of
these guys was
griped
GED G all these guys are the third layer
this's going to make it
pop and we'll revisit the gnome here in
a minute
so for this guy I'm going to want to add
some things and subtract some subtract
some things since we want to be able to
paint these letters
separately and not have to paint inside
lines or anything I'm going to want to
be able to cut these letters out
separately right so if the S and the P
are on the same layer they can't be
overlapping like sh like it's shown in
that picture so you're going to cut the
P out of the s or vice versa yeah I'm I
think I'm going to make the letters
like each one stacks on top of the next
or looks like it stacks on top of the
next okay now in illustrator I would
simply go copy paste in place but
there's no paste in place inside create
a space and then lining these back up I
don't know if I'm actually lining them
back up I could be slightly off then my
cuts will be off my whole thing will be
off that's it so your trick here I can
tell there's a trick coming so I have a
trick I'm going to use the offset
right and I'm going to drag this offset
distance down to zero and I'm going to
say only outer
shapes can so now I have the outline of
the P you have the outline of the P can
you drag it away and then do undo so I
can see it first I'm going to go ahead
and click engrave so it to fill it okay
and I'll move it to another layer so we
can
see there you go now I have a perfect
outline of the P that's already filled
ready to start doing some subtraction
from other layers so we don't care that
it's missing the inside cuz you're just
going to use
that the pattern to cut out of the s yes
I got you so we'll go contrl Z to put it
exactly back now I'm going to grab the s
first then the P come up top and I'm
going to say
subtract now if I drag my S away you'll
see that the P has been taken out
clever now we'll do the same thing to
the or
offet the outer shapes only confirmed
engrave I'm going to grab flower I'm
going to make sure it's ungrouped
because I don't want to try to cut a
grouped
object I'm going to grab the
flower and then the r That's The
Knockout and we say
subract because I'm going to need this
flower
for support for this flower it's got to
be able to get glued to
something I got to do this a couple more
times with the r cuz it's also touching
the P confirm and breath we grab the P
we grab the r
subract control
Z I want the S to cut out the flower
flower is just going to be means it be
tucked in there okay
so I'm going to give it an
offset zero outer shapes only
confirm quick
engrave going to grab the
flow I'm going to grab the S subtract
front I'm going to do something a little
bit different with the p because I don't
want a million different pieces here I'm
just want to be able to stack my letters
and paint them and since something will
be laying over top of this flower right
I can get rid of the I don't need it
let's just marry that flower to this
PE and we're going to unite it so I'm
going to grab both and we unite
it so there you go I have a stack it
should fit right back together like a
puzzle we're going to go ahead and fast
forward this video just to keep it a
little bit shorter but you can find the
whole video free over on our patreon the
link is in the description look for Kim
and Garrett make it
step three we're going to make all of
our Cuts I'm going to bring the quarter
inch MDF over to the X tool P2 or we'll
cut out our design and we'll do
everything on this one
board we're going to connect to our X
tool now we're going to refresh our
background and hope oh I'm goingon to
have to group this stuff a little
tighter bring this over
bring this
over and then I could probably group his
hands and stuff a little closer
together there's n
those going to release that one and get
rid of this little cut
Mark bring his feet up so we don't lose
them you don't want old Lefty walking
around with just one foot
all right everything's looking good I'm
going to select all make sure they're
all on the same layer yeah make sure
we're all on cut yeah now for power I'm
going to go a
100% And for Speed I'm going to go
seven let's do a aim to
measure everything might shift a little
bit just having it measure the height of
the board right in the center of the
board is what he did
yep oops
all right everything's still selected
I'm at 100% power 7 mm/ second one pass
and I'm going to lower the focus I'm
going to lower the focus by 2
mm 2 mm
mhm I'm I should probably use tabs but
I'm not going to I'll will get the stuff
out of my Chrome tray at the
end all right that's it we'll hit
process and start yes because I have
high power and a low speed you know
there's a good chance of a flare up so
don't leave your machine pay attention
to it always have some type of fire
extinguisher next to
[Music]
you step four
now we paint we're going to be using our
foxy Hues paints and all of our springy
poppy colors now we've done a color
scheme you don't have to paint yours
this way but you know how we do it's
always go big or go home so everything
is getting its own color and we're just
going to have to some of them uh I might
have to lighten up my dark purple my
plan is to add a little white to this so
we're going to use these These are great
to mix you can mix colors and make
different colors here's a little coral
color I'm might use our pey Peach that
we have out for spring if I didn't then
I would add a little orange and pink and
make this like a little coral color so
we're just going to mix all these colors
up and get started we can use either the
rollers the 4in rollers you'll probably
see us using both or the um wedge
sponges like the makeup sponges we use
those a lot if we're just doing small
pieces and one or two you know dabs of
color because these are spring poppy
colors we're going to give everything a
primer coat of white and by primer I'm
just using the ash
Avenger because these light colors have
little pigment in them and as you layer
them it takes more and more layers to
really make that pigment pop but if you
put this white underneath then that kind
of reflects the pigment uh on the top
coat and for painting this one you can
see I've separated by color and then I
actually wrote on my tape what color it
is so I didn't forget and hopefully
everything is
[Music]
organized step five time to assemble
we're going to bring it all together
with some of this star Bond thick we're
going to glue everything on this backer
working our way down we're going to
start at the little birdie and work our
way actually I'm going to start the S
then the bird then I'm going to work my
way down okay
[Music]
[Music]
so can you use canva and creative space
to make yourself some laser cut files I
think the short answer is
yes don't want to Discount Adobe
Illustrator it is definitely a powerful
design tool and you can do some amazing
things with Adobe Illustrator but if
you're at the beginning of your design
journey and you're just starting out
with cut files Camp was a great place to
start to create a file we did some
really cool things today Garrett's
really showing you some cool tips that
you could pick up and do some um little
more intermediate level type designing
right there in canva and then bringing
it over to or I guess you did most of it
in a creative space you can do that same
stuff in light burn I like to gather my
quip art and stuff in canva and then
bring it into I guess creative space or
light bur and do some design work now
that's good for quick and dirty but I
think I could have done this design and
a lot less time using illustrator I bet
you probably saved 25 30% of time if I
would have done it an illustrator I have
to say I'm pretty impressed with
creative space it has the capabilities
to actually do some design work and if
you're using the engrave settings you
can actually see it and work with the
objects a little bit easier they look
great this looks really really cute it
was exactly what I had envisioned um
when you were designing it big thanks to
all of our patrons we love you guys that
is the best way to support this channel
that is a great community over there we
also do illustrator classes free files I
think we're up to like 400 free files
now you should check it out but I'm
about out of time I have to go make a
couple more of these
standard you have to go test out your
abilities in Creative space and we will
see you next time where we'll do it
build it and make it again you know no
oh my gosh I thought he was going to hit
stop record
O is a small little guy
oo this is all the four Final Shots too
this living in a danger zone mhm Risky
Business