Full 120 days in 40 min. Vintage car + Bugatti. Total restoration, timelapse.

Tuning Pro
54 followers
Meet the next series on the construction of Volgatti. Today we will talk about the purchase and revival of a new donor (BMW E63) for our project.
#GJWcars #GJWauto #Customizingcar #tuningcar #howto #DIY #CarCustomization #upgradecars
Hi guys! Welcome to the first reanimation of a dead solo on our channel. So, basically,
we had the misfortune of buying a total BMW. A bunch of complications and setbacks that stretched
over four months. But eventually, the car came to life and started to look like a proper car.
Actually, this is the new donor, on which we'll put the Velgadi body. Enjoy the show!
So, after we realized that we needed a new donor, we spent a long time looking for the right fit.
And then, a couple months later, this ad popped up. BMW E63 with a 4.4 liter engine. At the time
of purchase, the condition of the car was unknown. We just knew that the price was five times lower
than the average market price. So, we took a quick look at it and decided to take. We popped on the
hood, if you can call it that, and picked up a bunch of former parts. Yeah, it's obvious junk.
But if you've done this kind of repair, you know that it's often very difficult to find some small
things, such as fasteners. And some of that scrap metal might come in handy. We can always throw it
away later. We ended up putting the car on and totally heading home 150 miles away. Judging by
the scenery, you can tell it was a long time ago, around the beginning of summer. Those who have been
following the project know that we originally choose a Ford Probe as a donor. I think a lot
of people have the question, why not use a proper donor right away? We're gonna have to redo the
whole thing now. Yeah, sure, the right thing to do would be to buy a cool matching car in good
condition right away. If we were living in a perfect world, that is. But unfortunately, it is what it is.
And I'm used to dealing with the things in the here and now, instead of waiting for perfect
conditions, which usually never come. But more on that in a bit. Meanwhile, four hours later, we have
safely made it to the workshop and are carefully unloading the car. Nick, do you like it? It's a cool
car, so we can just put the batteries on and start it up? Yeah, let's put the batteries on and go for
a joyride. There's gonna be some issues with visibility. There's a spot on the windshield.
Anyway, our victim is in the building. We took the wheels off, took them to the tire shop. It certainly
looks pretty ugly. There's a seam over half the wheel, if not all of it. Little seams of all kinds
are all over it. The weld is certainly terrific, but it looks a bit ugly. Well, the car will roll
on these wheels for a while. The rims will obviously be different. We fixed the tires, put
them back on. Anything to keep the car on wheels, so it can move around, roll around. Alright guys,
we're gonna roll it up, wrap it to the van and we're gonna get it rolled up. A couple days later,
the car ends up standing on inflated tires. Everyone is full of energy and ready for action.
Not yet realizing what we've gotten ourselves into and how much effort, time and money it will take
to restore it. We got the car in, we're putting it out on the racks now. We lifted up hikes so we
can disassemble it safely and comfortably. We removed the engine, hood, covers, all that, so we
can check the whole thing for defects and then replace things that are dead to make the car
running before registering it. We're going to dismantle all this mess right now, removing
anything that's in our way. That's engine sort of unscrewed already. It's unscrewed because the foot
is just broken off the engine. Completely, it's loose. We unscrewed the foot real quick.
This part is damaged. This is where we can check the chain tension. It's very convenient. I can
have the ABS unit serviced. Well, that's the kind of damage we have, which is pretty devastating.
Now we're going to pull it all out, check for defects and make some sort of decision.
And that's exactly what we're doing. The first thing to do is to clear out all the underhood
space and deal with the bodywork. It's worth the trouble at all. Or we should scrap the car, since
it's not that simple. The entire underhood, including the power structure, is made of aluminum
and it's not the easiest material to repair. By then the guys had removed the engine, although,
to be honest, it wasn't really installed. Most of the mount shattered into splinters upon impact.
We removed the engine, checked for defects and see what's broken. We're not really interested
in the little things, like connectors. But since the impact was to this side, it has the most damage.
Valve cover, front engine cover. Once we get that off, we'll see if the head is still intact.
The foot is torn off, but we've already seen that. Here, the exhaust manifold is dented. Here's the
protection, the wires. The foot is torn off, ripped right off the block. On the other hand, the alternator
is missing a piece. It's broken off. Some plastic. Everything is covered in oil and antifreeze. It's
not clear if it was the engine pin or if it was a post-accident thing. Here, more damage to the
transmission. The rear foot of the gearbox is torn off. And then we'll sort it out and see what's broken.
The first thing to do is to assess the damage to the bodywork. So we move the engine aside,
disassemble the underhood and work our way forward. We remove the exhaust system,
fenders, seal plates. Basically, anything that gets in the way of getting to the bare bodywork.
Unfortunately, the interior will also have to be completely dismantled, as we need access to the
engine panel on both sides. It didn't really take long to do, just a day. But as practice shows,
it doesn't take much time or width to disassemble. But to put it back together, moreover, after a
couple of months, this is actually quite a challenge. And not everyone can handle it. This
is where many projects come to an end. And then they show up on bulletin board saying,
it's all done, just needs to be assembled. I hope that's not our case. Now it's time to check out
the most interesting part. With internal concealed damage. This is the most obvious thing that
everyone most likely expected. This is the largest fault in the factory crumble area. BMW has a
factory crash area here. In a crash, it dampens the energy of the impact. And it's crumple here,
too. We have a fault here, a fault there, there's a fault here, and over here. But it's actually
okay. It's not great in any way, but there's nothing critical about it. Because the person
who works on the car bench came by and said he could fix it all if we had a spare section of a
car. And he'll be able to put it all out, tighten it up, fix it, bring it all back to factory
geometry. In order to take the car to the body shop, we need to get a spare section. By happy
coincidence, literally on the next street over, there was the same car body in the junkyard.
That's where we went, taking a saber saw and a bolt cutter with us. We decided to cut with a large
margin, because it doesn't affect the cost in any way. And at the moment, it's unclear what's the
craftsmans we need. After an hour, we have this part, which we stuff in the trailer and go back
to the base. No, not yet. In the end, Nick decided to grab a piece of the left spar,
since the sailman didn't have change. Now all we need to do is wait for our turn on the car bench,
which ended up taking a little over a month. But we had something to do in the meantime,
namely the engine. Here, as they say, the farther you go, the worse it gets. Of course,
even initially, the primary inspection, it was clear that it was inexpedient and
practical to carry out such a restoration. It's much easier to buy a running car. Yes,
that's true, and we knew it. But there are a few other things to consider. First of all,
the budget doesn't allow us to fork out $15,000 on a donor, on a donor in a decent condition.
Second of all, we don't need a perfect condition, because once we put the car on the register,
we won't need most of the parts. We're gonna cut the car to pieces again, and here it's up to us
to decide what to invest in and restore well, and what to do just to check the box. And third of all,
things that are bad for the ordinary people are content for YouTubers, so we shoot it for you.
The further the dismantling goes, the more surprises await us along the way. Not only
is the VANOS damaged, we saw that right when we bought it. There was a broken off cover,
the valve cover. This is the chipping we saw. Replacement needed. This VANOS has a chip on it,
it's unclear if it will affect anything, but it's not very nice either. We removed the head
of the block to repair this break right here. We have missing pieces, we thought we'd weld them on,
we'll take it to the grinder, and it will be a pretty good head. Especially since it's pretty
intact inside. There is no gouge on the camshaft, it's very good. But when we took it apart,
we saw this. Broken off grooves, or what it's called properly, a crack on the camshaft.
This caused damage to the holding down clip. The combination of these factors will most likely lead
us to a complete block head replacement. Before taking the car to the body shop,
it should be nominally running, that is, on all four wheels. We washed and cleaned the subframe,
and then the steering rack. We bolted the subframe to the side member in one piece.
We put the rail on so the car was on wheels. It was easier to load it on a tow truck. On this side,
of course, we slightly missed it with the bolts. The side member is on a slightly different plane,
and that's it. It's on wheels. Moveable, rideable, steerable. It's a little dusty,
but we'll take it outside and air it out. It's gonna be beautiful. Oh man, it's a beautiful
car from this side. If you don't know some of the nuances, it's quite a nice car. We ended up taking
the car outside, getting the dust off, pulling it onto a tow truck, making a disposable trunk lock,
and sending it to the body shop. So, another update. A week went by. The guy called back.
BMW's ready. I drive out. I drive it. I call a tow truck. We'll go to pick it up. The guy doesn't
really want us to film there. He doesn't really like it, so I won't film there. When we get back
to the base, I'll show you the result of what we've done, what's left to do. A week later,
we end up with a restored body in correct geometry. In fact, the handyman did an excellent
quick job. Thanks to him for that. I can't leave any context, unfortunately, as he doesn't need
the publicity and media exposure. He's loaded with work for a couple months ahead, and considering
the fact that every day new batches of broken Teslas are brought to us from the US, which,
by the way, also have an underhood made of aluminum, the list for repair is only growing.
The BMW is back. It's reassembled. It's got nostrils. Sniffling. Here, it's got a piece
of frame replaced. And this piece of frame was replaced almost completely. It's all one piece,
where the jar is. There should be no issues with registration. There's more. It was trained
out here. This nose. There's some more welding to be done here. It's welded, but not all the
way through. We'll have a welder come and weld it all up. Here, the dents are gone. All the bands,
all gone. The tunnel inside was straightened out. It's chewed up, of course, but it's straight.
The folds are almost all gone here. It's all straightened out. Looks nice now. So it took us,
with the waiting, with all the stuff, it took us about a month. Probably more than that, since we
took it apart and prepped it for bodywork. That's it. It even looks like a car already. Now we're
gonna have to put all this, this mess, back in. How are we going to do it? How are we going to
put it together? I can't even imagine. As the saying goes, we'll never know until we try.
But before everything can back to put together, the car has to be disassembled even more.
First thing we did was remove the suspension and brought it in an aluminum welder. Yes, of course,
it should be done in the body shop, so that the handover of the car was welded seams and points.
But then we could have waited in line for another month, best case scenario. So we asked to fit us
into the smallest available slot, on the condition that we would take care of the further
welding and assembly work. Once the welding was done, there was a final touch left, painting the
engine compartment. The first thing we do is give everything a good wash, dry, degrease and paint it
black. So this is the finished look of the underhood. Andrew has prepared all of it, painted,
he applied sealant where it's needed. Everything is done, painted in one color. It looks, well,
like a new car. New. New car. Brand new. The seams were welded for us by Alex. He reinforced them,
made them wider, so that later on we would not have any issues to deal with later, so that the
aluminum would not burst anywhere nearby. We left them in, didn't cut them down, so as not to weaken
this stance, please. Yeah, that's it. That's why we have such need, even seams on this side and
that side. I don't that traffic police will find any issues, as the jar with the VIN number remained
unbroken. That is, it was repaired. This piece of the side member was replaced. This tail was pulled
out. Here it was just a little bit torn. There was a welding point, but the jar overall remained
unbreakable. That is, the factory points were not separated here. This side member, we didn't cut
this piece. We didn't touch anything here either. We didn't disconnect it. Here are the factory points.
That is, we should not have any issues when registering. How it will actually play out? Well,
we'll only find out at registration. And since we've already got everything painted, we're gonna
put the whole suspension back in. I hope it's the last time, because we've put it in, taken it out a
couple times already. We need to find matching bolts, because all the bolts they gave us were
in a state of... Here, I'm gonna show you. I'll find right here. The bolts are in a roughly this condition.
All crooked, all unthreaded. So now we're gonna find the right fasteners and put the whole subframe
back on. The whole suspension. In the end, we did as Nick said. We bought the necessary bolts, put in the
subframe with the suspension. It seems to be the last time. And began to assemble the interior. But
this is definitely not the last time the interior will be disassembled and reassembled. At this point,
we need to get the car in proper shape. Then drive it to the traffic police station and register it.
After that, we'll disassemble the interior again in order to fit the top from the Bugatti. It is
already clear that we will definitely be cutting the roof and most likely the pillars. But more
about that in the next episode. Since we ordered a bare engine, we now have to put it together and
complete it with our parts. We've gotten some things off our old engine. Things that are good.
We're gonna have to buy some stuff. Gaskets, some oil seals, some small parts. We've already hung
the flywheel. We checked what houses, spigots, little things, wires, sensors we need, bits and bobs.
We're making a list to order. And in the meantime, we're cleaning out all the old parts. Order the feet.
They're here now. The idler pulley is from the old engine. It looks like it's been swapped out to
pump, alternator, all sorts of things. So that it can be assembled and put it in the car. At the same
time, while things are on the way, we need to remove this defect here. The right manifold was pretty
badly damaged in the accident. I'm gonna try to get it out of here. This dent without cutting. Tap it
back with a hammer. All the missing parts for the engine arrived to us. Gaskets, sealant, all sorts
of rubbers, rings, motor seals. They all arrived. First thing we do is change the sump. Because the
engine the guys provided us with has an English car sump on it. And it has the starter on the other
side. We put the sump from our engine in here. And everything else too. Starter, alternator. We're
putting everything in. The gearbox, the flywheel and everything goes in the car. Assemble, start, drive.
Five minutes. So Alex did exactly as Nick said. We took everything apart, gave it a good cleaning
and reassemble it with new gaskets. So we assembled all the stuff related to the bottom of
the engine. Sump, filter, second sump. We assemble it with gaskets, tighten it down to the proper torque
with a torque wrench. Put the engine on the table. We're assembling it now, putting the flywheel on
and we're putting all the attachment. We will forget something. We will assemble and disassemble it.
We'll figure it out on the spot. Clean, wash, degrease, sealant, gaskets, rubbers, rings, liners.
Reassemble everything. I think it's unlikely we'll get anywhere the first time. Some things will have
to be taken apart. Reassemble. But I think we'll succeed. The next step is to connect the gearbox
to the new engine, which means it needs to be disconnected from the old engine. We took it off
and immediately, to make it nice and easy to work with, we gave it a good wash. And then we have all
the parts we need. Now all that's left is to put this puzzle together correctly. While the guys are
at it, I'll tell you more about the logic of the donor replacement. Initially, the Vulgati project
is the first project on our channel, on a channel that specialized in carpentry and epoxy. Of course,
I knew it was a risky business and far from a sure thing that the concept would work, but I really
wanted to give it a try. That's why we launched the project on sheer enthusiasm with minimal
investment and it was decided to build it for fun on the basis of the Ford Probe. It was the only
suitable option we had enough money for. After a while, the project has become well-loved and you
enjoyed it a lot. We ended up with a really cool design and proportion. And it's a miracle, because
we didn't have a 3D model of the project. We did everything by eye. Yes, of course, it's wrong and
the next projects will be done by science. But it always has to start somewhere. So we ended up with
an interesting successful project that is built, to put it mildly, on the wrong donor. A new donor
is a whole other story. Now we have a powerful rear-wheel drive car with a suitable wheelbase
that we just need to fuse to our bodywork. There we go. So we got it all assembled. The engine's in,
the harness, the belt. It's all there. The subframe is back in place. Engine mounts are screwed back
on. It's all there. I put in the gimbal yesterday. Not without trouble, of course, but let me lie down now.
Put the gimbal in here. There's the gimbal. Now the task is to put an aluminum heat shield here.
The exhaust goes underneath it. Alex went to get oil and we're going to reassemble it now.
Here, hinge the wiring, hook up all the sensors, connectors, keep installing it all. We'll try it
today, probably even turn the key, rev the engine. To start it or not, I don't know. I don't believe
we can get it started very easily. I think there's gonna be a lot of mistakes, a lot of quirks, but
we'll at least try to crank the starter. Look at the wiring for integrity. It was all torn. I want
to test it. Okay, now I'm putting in a heat shield and exhaust. So the engine is in position. Before
doing the test run, we decided to finish the rest of the puzzle. The next step is to connect all the
wiring. This is not the easiest task either. Some wires are just broken, some are missing. Many of
the connectors are damaged so badly, it's hard to identify them to replace them. And even if you manage
to order a replacement, the following happens. Okay, here's the deal. ABS connector is ruined after
the accident. Absolutely. I mean, scattered into pieces. We ordered this connector, only it was not
from E63, but from X3, I think. I mean, what we need to do now is re-pin our pins here. There's our set
of pin-out pins. Let's get started. It ended up taking half a day to do the final assembly and wiring.
After that, we put in the air filter, poured in the oil, prayed and got ready for the first launch.
We put a little oil in, connected the battery. I just put in my car's battery for now. It's small.
The trunk is a mess here. Our goal right now is just to rev the engine. There is no goal to set
now. The goal is to crank the engine, to get the oil going, to get it all going. Eight liters goes
into this work of art. All right, let's get the connectors of these injectors. How do they come off?
Like this. And back here. What's that? Footlights? Yeah, it's footlights. Oh, first signs of life, yo!
First signs of life. Oh, brake lights! Brake lights! Lights, huh? Well, the lights are on. First sign of
life in the car. Maybe there is a light on in here? There is a light in the glove compartment. That's
it. It's brand new. New car, it's fixed. Ah, they're not fixed. I mean, their turn signals
aren't fixed because no one touched them. They never indicated. Oh, ignition keys. We got a special
tool here. A specially trained wrench. Well, it looks like nothing. The ignition won't turn on.
It doesn't move at all. I mean, the ignition, it doesn't respond. We only have the lights. No gearbox,
nothing responds, nothing lights up. We'll see. All right, now we're looking at the fuses and we
probably need to take a look here to disassemble the whole steering column thing. Maybe a fuse of
some sort after the accident? Power fuse, yeah. Probably from an accident somewhere in the trunk.
We'll take it from here and check it out. We ended up pinning all the fuses and unfortunately there
is nothing wrong here. We'll have to keep looking. Anyway, guys, we've basically defeated it. Just like
that, the ignition is off and just like that, it's now showing its first signs of life. Yeah, we've got
all the plugs on, injectors off and the engine won't start. For some reason, the ignition came on.
Check. Check is on, everything's fine. Anyway, the thing was, the key was trashed, the receiver didn't
see the antenna. I put the receiver as close to the antenna as I could and it saw it. It thinks
it fell down. There's just been a mistake. Maybe the starter needs to be checked, but the starter
worked directly. Huh, listen, hit the brakes. It's in an automatic. Oh, that makes sense. Automatic.
Signs of life. Right, okay, we did a bit of a rev, but we used the weak battery from my Peugeot.
So yes, there is a 45th battery in there. Its mileage is fine, 164. It's gonna start now, you hear me?
Let's get it plugged in. Hold on, it's not good. It's got no injectors, so we turned the injectors
off to rev the engine, run the oil. Okay, I've got to bolt this receiver in here. My hand's getting a
little stiff holding it. Some kicks. Maybe it's enough? So far, this is it. We'll probably double
check it, put the injectors in. What's our fuel situation, by the way? The tank smells of fuel,
it's sputtering. We seem to be doing okay, oil or not. We plug the injectors back in and now we will
see a time to start. First test run with the injectors connected. Supposedly, if it starts,
it should start now. Or not. Nope, it's a failure. Oh, wait, we've got to see what's going on.
Is there a spark? I don't know. You can't get the plugs, you can't just get the high voltage cable.
We got fuel. At least it's in the fuel ramp. Either it's fuel, we have fuel in the ramp,
so we may have the injectors not open, not impulse coming to them, or no spark. And again, we're going
to probe everything that can be probed. It took half a day, but finally managed to figure out the
weak link. We changed the crankshaft position sensor. Let's see if it makes a difference.
This old one showed no signs of life at all. Let's hope that's where the punch line was. Alex got the
steering wheel assembled and now all that. Now, where's our key? Oh, here. Universal key wrench.
All right, let's hit the brake. Okay, that was kind of creepy. Such a harsh squeak. But it just
started right up. Well, it turns out the problem was the crank sensor. It was giving some nonsense
instead of signal. We replaced the sensor and that was it. The squeak is probably coming from somewhere
along the belt. We'll find out. We should find out what's making that hard squeak. At least it started.
That's it. We're making progress. In order to rule out squeaks in all the rotating parts that are
connected by the belt, we decided to just remove the belt and spin the engine without it.
No, it's something else. It's not these pulleys. Yeah, the sound is really bad.
No, it feels like the squeak is in the back. I feel like it's in the front. Well, what could it be?
Why is it so slow to start? How long? Well, it's like it's hard for the battery. It's got my battery in it.
So, we're on the lookout for the cause of this screeching. I took the starter off. Alex assumed
it was the starter. There's some kind of wear on the starter. There are some traces of shaving or
something. So, the assumption is probably correct. There's... I don't know if you can see it or not.
No, you can't see it at all. So, the flywheel is a little shiny. So, we have a starter we bought with
the car. It has a foot broken off. But as an experiment, I'm putting it in right now. And if
the sound goes away, we take that starter to the repair shop. It's completely rebuilt. We put in a
fully functioning starter. We changed the starter. The moment of truth. Whether we'll have the same
noise. I forgot my keys again. Okay, keys. Okay, hands out. That's it. The sound's gone. As you figured out,
it was the starter which was making that unpleasant sound. By happy coincidence, we found the starter
repair six feet away from the car. And literally in 20 minutes, Alex assembled a working version
from two non-working ones. Actually, that's why we took a bunch of old parts that were left over
from the accident that originally looked like junk. So, now it's basically gonna be the first
ride. Let's try it. I think we've got it all assembled. Brakes, power steering. It's all
assembled. We'll try to drive a couple of feet around the garage. But something tells me it's
not gonna be right. The gearbox will probably say it doesn't want to go anywhere. What are these?
Artifacts. It had one of those when we first tried to start it. She had one of these things too.
And then it was gone. The video card. Well, try it. There, it now says service.
It started to run very badly. On half the cylinders. Try to throttle it up a little bit.
Will it stall? I'm hitting the gas so I don't drive away. Yeah, it's throttling. Yeah. Ah,
it's indicated a major error. Let's probably stop torturing it. We'll troubleshoot the errors.
Because it's working on the half the cylinders. It feels like it. Let's try once again to overcome
the first few feet. After some minor adjustments. I'll explain what happened later if I can. Maybe
it'll drive at least a foot in the garage on its own. Here it comes. On its own. First few feet.
And it stalled. That's a failing rate. It's very weird that here it's somehow stalling.
But the computer guy didn't come yet. He didn't clear any errors. Nothing. It is what it is.
Just the way we put the engine in. So it's likely she has some errors that she doesn't
really want to work with. Well, try the reverse. No? What does it go forward in a reverse gear?
Anyway, we'll see what's wrong with the gearbox. Maybe I just didn't fasten the rope correctly at
the bottom a little bit. Although it has no other position there. No, basically. There is no other
position. Yeah, it's a typical BMW. So the result of two days of work was assembled cooling system,
assembled power steering system, assembled brakes. It's all hooked up, pressurized, pumped.
But no matter what we picked up, things had issues. We got to the cooling system and the
anti-freeze booster pump failed. A couple pipe seals leaked, heat excharger leaked. We still
haven't beaten the gearbox. The box is going forward in all gears. Drive, neutral, parking.
Whatever we switch it to, roughly speaking, it goes forward. It really wants to go somewhere
urgently. Apparently. Despite our plans, there are tons of errors. The interior was nuked. Nuked
once again. It was assembled and nice looking. Now it's all blown up again. We're waiting. The
electrician should be here in about an hour. I hope he can help us with the remaining issues.
The windshield is coming. It's on its way. It's being delivered today. The electrician arrived.
We didn't film it. He diagnosed the throttle. Throttle error. There are some gears inside. It's
not adapting and it's not working well. It's cracking. The gearbox was crashed. It appears
to have no power. Nothing on it. The fuel gauge doesn't work at all. Oil temperature is working.
We were worried about the engine temp. They said engine temp works. Everything is fine. Oil temp
is responsive, working. Anyway, the engine sees the temperature sensors and we won't overheat it.
It will crash. It will get into error. It will keep us from overheating itself. Once we have an
accurate list from the diagnostician, the only thing left to do is to fix all the items. That's
what we're doing. Okay, unscrewing the box support. That's where we have our target. The power. Anyway,
we check if the power is coming to the gearbox at all. Because the computer can't see it at all.
We had to remove the exhaust from the manifolds. Back foot. Here's the target. The plug. Now we're
checking power. Controlling it. Well, we're looking for something. We're checking and we're figuring
out. And in the gearbox, the counterpart needs to be checked. Okay, I've got a young electrician
stand here. Connector pinout. Multimeter. Connector. Now we're gonna see what's in here. Is there any
power? What the symptoms are? I think we beat the gearbox. All in all, what we had. The gearbox was
in a crash. In error. The control unit didn't see the gearbox. Like it's not even there. What was
the point? The point was that, as it turned out, there was no ground in the connector. The ground
wire, well, it's kind of there. But there is no ground on it. And that is, there was no ground on
the gearbox, on the valves, on the whole thing. We've attached this wire. Now that's hanging on the ground.
This will be our ground. Well, this is lame. But to look for the ground under the hood, to waste a lot
of time, I don't really want to. The second problem was that this fastener was bent backwards a lot.
And because of that, we had that pulling rod misaligned. We couldn't hit any gears, so it went
forward regardless of what we did. Given that the gearbox didn't understand where it was or what we
wanted from it at all. None of the valves were on because there was no ground. Yes, that said, it still
just drove forward in any gear. But it neutral, parking, reverse. Any gear it drove forward. This one.
When we straightened the linkage, synchronized with the selector in the interior, Alex was sitting
inside, looking at what we had on the dashboard. Forward, neutral, reverse. And I clicked here and we
matched the selector to the checkbox. We straightened this bracket, connected it all up. Everything is
now switching, working. The car knows where the gearbox is at, what position it's in and how it
engaged the gears. Now I'm putting it back together, putting the gearbox in the gearbox supports,
exhaust, pads, lift, put everything in. That's it. It has to start at five. I think we should have it
running on. It's on in the garage today. Back and forth. Because before that, it was only going
forward and not very confidently. We ended up doing a run around, sorted out the gearbox, replaced the
throttle. Once again, we can do a test run. The first few feet after fixing all the bugs.
Your front wheel is getting blocked. It's pulling and it's dragging and the rear wheels are spinning.
Spinning on burnout. In place. What the hell is this?
Is the handbrake on? There is something weird going on. The wheels lock up immediately.
But it's still trying to drive. An electrician came to us. As you remember, the throttle was
diagnosed then. There were bugs in the gearbox. It was stalling or something. We didn't understand
what the reason was. Well, there was some speculation that it was probably the throttle.
Because we're putting load on the gearbox and it's trying to regulate the throttle so the engine
doesn't stall. And that's why it starts and drives. That's how it works. We had no ground to the
long story short, the throttle was not fully energized. The electrician and I started to
figure out what was wrong. We looked at all the wires, started tapping connectors and we came to
the conclusion that when we assembled it, we didn't see in the box right here. Where the big box with
the blocks and everything. We didn't see one connector and we didn't put it on. It's a little
thing at the bottom with ground on it and it was the throttle ground. Just put this connector on
and that was it. The whole car just came to life immediately. No errors on the engine,
no errors on the gearbox. And it turns out that the car behaves normally now. The gearbox shifts
as it should. The throttle is working properly. Everything works as it should. That's it. The
car's idling. It runs smooth. It only has ABS errors. Otherwise, the car works. Okay, it's smooth.
It's responsive. It sounds great. All the cylinders, everything in place, everything working.
Our hood looks like it was chewed up by beavers. They spat it out because they didn't like it. We
decided not to buy a new hood as we don't need it at all. We only need the hood to register the car.
That's it. So we decided to try to restore, to resurrect this hood. To make it easier to do this,
I divided the hood into its components, split it, that is, into the stiffener and the cover.
Now we're going to paint and varnish it all. Yes, of course, it's a very questionable repair.
In the end, it can hardly be called a hood. Basically, it's only good for scrap metal.
That's where it'll go after we put the car on the registry. But such repairs are sufficient
for registration. We put the hood together, welded the cover and the stiffener. Our repair methods
are as radical as possible. Edge secures with self-tapping screws. Yeah, and we riveted this one.
We riveted with a wooden mallet to avoid cracking the aluminum. Now we need to glue the stiffener
and the cover with sealant so that they don't fly around. Don't flap, as they say. And we flip the
hood over and putty it. This is where the beavers chewed it up. We're going to cover this with
and polyester resin according to the well-known technology.
It ended up taking a couple days to straighten and putty. Of course, it wouldn't be easy to
buy a new hood. But considering the fact that it's made of aluminum, the prices are quite high.
The fenders and bumper, on the other hand, are made of plastic. These items are more affordable.
We bought them with damage, also tweaked them a bit. And now all that's left to do is coat it with
paint. But first, we change the windshield. The result of today's day so far. It is now 6 pm.
Was the assembled salon. Alex completely assembled the whole salon. He's fixed the multimedia. This
is the one thing we had that wasn't working at all. Fixed it, it's all clicking, no errors,
the engine starts, everything's fine with the engine. We finished the entire cooling system.
We replaced this auxiliary antifreeze pump right here. We installed a radiator cooling fan. The
guys came by, installed a new windshield. Now we finalize already as it is. Just as we have it,
fenders, bumper, hood, we're just a rush to get it ready as we go. Here we are. We didn't bother,
we cut it out of polycarbonate, plexiglass, probably plexiglass, fog lights, plugs instead
of fog lights. And we have these grids. Here, nostrils. Because it's not easy to buy them and
they cost quite a bit of money. And for us, we need them for one show and that's it. I'm gonna
spray paint the tire too. I'll prep it, spray the tire with paint. That's how comprehensive disc
restoration works. That's a joke, by the way. Okay, the time is 7.52 p.m. We've got the face
assembled, more or less. The gaps are kind of, hold it with the finger, squeeze it here, lift it here.
To put a washer in it, let's paint it. Okay, it's still 10.16 p.m., it's getting late, now restoration
is complete. Well, paint job at least. Bumper, grid. Look, the grid. Do you like it? I'll tell you where to
get a grid like this one. The fruit crates we got from the dumpster. Here's the box. Hatch, fender,
that's it. The car is waiting for us to come back tomorrow and put it together. We're not going to
assemble anything today. That's it for today. The next day, when the paint more or less dried, we move
on to the fun part. Final assembly. The main task for today is to put the car on the register to get
the documents and license plates and to start further work. And then, when the BMW turns into
a Volgatti, we'll get into the legalization of this creation. But that's another story. Our assembly is
almost, nearly almost done. The finishing touched the interior. I even vacuumed a little. Alex is
there fixing the last points, wires. The interior is assembled. I even vacuumed. We're gonna take
it outside, wash it. That'll make it as good as new. In the end, we rolled the car outside, had a quick
wash and headed to the traffic police office. Anyway, we just got approval from the traffic police.
It's literally been a minute. We pulled off to park and this happens. Everything's leaking. It's leaking
somewhere. Just a little bit. Oh, the tank's busted. Nah. Look, the tank's burst and there shouldn't be
any pressure in it. That's how it looks. So, it was just too airtight. I left the boys alone for five
minutes, let them out of the garage. Here, little one had a, the ship has cracked. We're changing the
tank now. We're probably going to the electrician to have him check the fans. But I'm still inclined
to think that the plug here is dead. That it just wouldn't let in. Although, the fan should have
cooled it all down. Anyway, it's unclear. We'll do something about it now. We go back to base and make
a decision there. The car is registered. So, next, we can do all these works with less stress. In the end,
four months after we pulled this dead guy into the shop, we have this result. Like,
subscribe and comment this video. Thank you for watching and catch positive attacks from the Axe.
