How to Prune A Really Neglected Apple Tree

Growing apples and processing apples
6 followers
I'm here in Cadillac, Michigan and behind me is a apple tree that is probably 25 to 30 feet tall.
It doesn't look like it's ever really been pruned or trained.
And the homeowner asked me to help him learn how to prune trees like this.
But there are a couple of things that I would suggest people think about before they decide
to take on a job like this. First of all I would ask them, do you know what the variety is?
And if they don't, I'd ask them, have they ever tasted the apple?
Most of the time they'll tell you that no, I haven't sprayed them, the apples aren't edible.
So what I normally would suggest people do is do the minimal pruning so that you can treat the tree
for insects and diseases for one year so that you can get a good quality apple.
Then try it, use it in terms of processing, fresh eating, that type of thing and decide
if you really like that apple or not because it's going to be a major job to prune this tree.
Since it's never been trained, it's not going to be a beautiful tree even when we're finished with
it. So I would think about maybe planting some new dwarf trees which you can keep under 10 feet
and you'll know what varieties you have and you get fruit in about three years because they're
pretty precocious trees. They bear pretty quickly. Now this particular tree, we don't even know if
it's a tree that was planted or if it was a seedling apple. So the quality might not even be
worth keeping and that's one of the things that I would think about before I would decide to go
through the many hours of pruning this tree to get it back into shape for production.
So when there's so much to do, where do you start? Well the first thing we're going to do
is we're going to take out some of the lower branches that will prevent us from getting up
into the tree to make the major cuts that we're going to need to make to lower the overall height
of the tree. And of course if you watch some of the other pruning videos, we're going to take out
all the dead wood. We're going to take out branches that we call water sprouts that go
straight up through the middle of the tree and there's some very large ones in there.
Then we will try to decide what branches do we want to remove in order to bring the overall height
of the tree down. Then once we've done that then we will take some major cuts on some of the
internal branches so that we can open the tree up. And of course we do all this with the hope
of making the tree looking presentable in the landscape because one of our goals is to have
an attractive looking tree in the landscape. That's going to be really tough with this one
but Homer and I are going to get started and we'll see how this turns out. All right.
Here we go. This is not going to be fun and it's going to be a little dangerous too if we start
working at the top of the tree. But anyway to make a long story short we're going to start
clearing out all this lower stuff in here so that we can get ladders in closer and also
be able to get to some of those higher branches. So we're going to start down here with the easy stuff.
Now that we've cleaned out a lot of this material we can bring a ladder in here
and we're going to take out this one, this one, and this one which will reduce the overall height
of the tree. But I'm going to start with this one because it'll give me a little bit more
maneuvering room when I try to take out these two which are pretty big and they're going to be heavy.
So I hope we can pull them down. All right. We've been walking around this tree trying to decide on
what we're going to do next in terms of taking out the large branches and this particular branch
goes all the way up into the tree and over another branch. If we take this one out it'll not only
reduce the overall height of the tree but it will also avoid the problem with this particular branch
crossing over another one. And so we chose the other one on the other side because that one is
a little bit lower to the ground and will be easier to pick than this one. So it's going to be a major
branch to take out but shouldn't be that much difficult. Now the remaining branch at the top
that we need to remove in order to shorten the overall height of the tree is a pretty big branch
and if we don't have the guts to take it on then we'll probably have to hire somebody
that can bring a high boy in here and take it down safely. Ideally you would take that down
in pieces maybe three or four pieces and it's less likely to be a problem but if I cut it with
the chainsaw I better have a place for it to fall and I better not be in the way of it otherwise
this video might be quite short. Okay we were able to get that large branch down safely. We had
another ladder that reached up high enough and we took it down in three pieces. So now we're going
to work on the lower part getting out the dead wood thinning out some of those branches because
a lot of the branches are very thick and we need to get light penetration through this tree. There's
still work to do in the higher part of the tree but right now we're going to take a break and
stay on the ground for a while. Now you can see that we've lowered the height of the tree by about
a third maybe a little bit more maybe 40 percent and at this point all that has to be done is
finish the thinning of the different branches as we said taking up dead branches straight up growth
crossing branches and dead branches and Tom's going to finish that up and this is what the tree looks like
