Pruning and Training Apple Trees

Growing apples and processing apples
6 followers
Pruning and training apple trees. Basic principles and new strategies to improve fruit quality
in modern plantings. Why prune and train? An apple orchard is a solar collector. Fruit trees
convert sunlight energy to chemical energy, then utilize this energy to manufacture nutritious food,
apples. Before beginning work on the tree architecture in an orchard block, it is
important to review why we prune and train fruit trees. There are two main considerations.
The total amount of light intercepted influences crop yield and the distribution of light
throughout the canopy determines the location of fruit and its quality. The primary goal of
pruning and training fruit trees is to improve sunlight distribution. Apple leaves must harvest
at least 30 percent of the sunlight available on a sunny day to operate at full capacity
and for the fruit to obtain the maximum size, color, and sugar levels. Whereas with a grain crop,
100 percent sunlight interception is optimal. With apple trees, fruit quality must be balanced with
total crop yield. Optimal sunlight interception is closer to 70 percent. In this way, leaves
throughout the canopy can operate with adequate light. Light can move about four feet into a tree
canopy before it becomes limiting. Strategic pruning and training create windows into tree
canopies to let sunlight in. This is an important step to grow big, sweet apples with attractive
skin color. Other goals to consider are tree size control and increased yield efficiency,
crop load reduction, fruit spur renewal, improved air movement, and disease control,
limb selection and positioning, shaping canopy to desired form. First, controlling tree size and
increasing yield efficiency. Pruning is a dwarfing process and can be used to maintain a tree in
its allotted space in an orchard row. Optimizing pounds of fruit per pounds of wood equates to
optimum yield efficiency. Second, crop load reduction. Since an apple tree will usually
set more fruit than it can support, partial crop thinning can be accomplished by removal of fruit
bearing surfaces. Third, fruit spur renewal. Fruit size and quality decline on old spurs.
Pruning stimulates new wood with young spurs. Next, improved air movement, which promotes better
drying conditions and spray penetration. These help to reduce damage caused by insects and disease.
An open tree canopy is an important component of a successful integrated crop management program.
Fifth, limb selection and positioning. Remove the damaged and diseased branches.
Also limbs that are more than half the diameter of the trunk at the point of attachment.
These branches tend to shade lower portions of the canopy. Limbs with wide crotch angles have
the best balance between shoot growth and fruit production. And a final goal of pruning and
training apple trees is to shape the canopy to the desired tree form. In apple orchards,
trees are trained to a conical or pyramid shape in most training systems. How we make the windows
into a fruit tree is important. It's essential to understand when to use various pruning and
training strategies. There are two types of pruning cuts, heading and thinning. A fruit tree
will respond very differently to the different cuts. With a heading cut, the terminal portion
of a branch, limb, or shoot is removed. The main effects of the cut are an increased number of
shoots, increased length of shoots, more upright growth, reduced numbers of fruit spurs, and a
denser canopy with reduced light levels. Heading cuts should be reserved for training young trees
and for limb renewal on mature trees. If there is a portion of a tree canopy where increased branching
is desired, use a heading cut. To make a heading cut, position pruner blades at an angle about a
quarter inch above a bud positioned to grow in a desired direction. Pruning tools should be kept
sharp so that the cut can be made quickly and smoothly. One type of heading cut that should not
be used on apple trees is a bench cut. It is preferable to use training aids to adjust limb angles.
With a thinning cut, an entire branch, limb, or shoot is removed. Growth is stimulated at the
site of the cut, but to a much lesser extent than with a heading cut. The main response
is fewer shoots, which results in a more open canopy and improved light distribution.
Thinning cuts are utilized in both young and mature trees to maximize light interception,
crop production, and fruit quality. To properly thin out a shoot, make a pruning cut at its base
just outside the collar. Notice the swollen area. Keeping the collar intact will result in an
improved healing response. To encourage the development of a new branch at the site of the cut,
a bevel or dutch cut is used. This is an angled cut that preserves the latent bud on an underside
of a shoot that will likely grow into a renewal limb.
Various training strategies can be used to open windows in fruit tree canopies.
The principle to keep in mind is that a very upright shoot will tend to be overlay vigorous
and will not bear much fruit, creating poor light conditions. At the other extreme,
a shoot or branch in a flat orientation will produce an excessive number of fruit
and shoot growth will be minimal. The ideal branch angle varies with apple variety and
training system, but is generally between 50 to 75 degrees from vertical for permanent scaffolds.
A scaffold limb spread to a wide angle will have better balance between vegetative growth
and fruit production. Temporary branches in upper tiers of an apple tree are trained to
horizontal positions to induce fruiting. A second or third tier branch that is overly vigorous
should be bent to below horizontal. Popular training systems in newer orchard blocks are
the vertical axis and the staked central leader, both used with size restricting rootstock.
In older blocks, common systems are the freestanding central leader and the multiple
leader, upside down pyramid system. Pyramid or cone-shaped trees, either the vertical axis or
the central leader system, intercept adequate sunlight while allowing good light distribution
to the lower canopy. An orchard of pyramid-shaped trees is arranged just like an efficient solar
panel system. The top of each panel allows light to reach the base of each panel.
Large freestanding central leader trained trees, and especially multiple leader trained trees,
have poor light conditions. It is crucial to create windows of light by thinning out each
scaffold in relation to itself and to the others around it. Developing a pyramid-shaped canopy
requires patience. At some point, as the tree reaches five to seven years of age,
the leader will grow taller than the planned final height of the mature canopy.
It then becomes a temptation to attempt to contain tree height by shortening the leader. Do not give
into this temptation. Wait until the leader has become fruitful and its growth has slowed before
heading it. Often this will not occur until the seventh leaf. Then shorten the leader by cutting
back to a fruitful side branch. The leader must be allowed to grow taller than the final tree
height for a year or two. Cutting too soon will lead to delayed fruiting and more vigorous regrowth.
Some refer to this management technique as crop and flop. Pruning becomes more intensive with
multiple leader trees. The greatest challenge in this canopy shape is to prevent the upper
branches with good light exposure from outgrowing and shading the lower limbs. Productivity and fruit
color in the lower canopy decline when this shading occurs. The most vigorous limbs in the
top must be pruned out to maintain adequate light penetration in the bottom of the canopy.
Thinning cuts are preferable to heading or stubbing back cuts. Sometimes multi-leader trees are
created unintentionally by leaving too many permanent branches in the top of the canopy
and letting these become too dominant. This condition can be corrected by removing two to
three major limbs per year from the upper canopy over a three-year period, thus converting the
canopy back into a conical form. Yields are reduced during this period of conversion, so this technique
is usually reserved for younger semi-dwarf trees. Pruning and training techniques vary with
varieties of different growth habits. Spur type trees, such as new delicious strains, tend to have
fewer, more upright scaffold limbs and more fruiting spurs compared to non-spur varieties.
The limbs have minimal branching. In spur type apple blocks, a greater number of permanent
scaffolds can be selected and strategic heading cuts are warranted when more shoot growth is
needed. Various training aids can be used to bend the limbs to more desirable orientations.
Terminal bearing trees, such as Rome and Granny Smith, tend to have weeping growth habits.
Hanging limbs are removed with thinning cuts or stubbing cuts. The spurs are short shoots
and for good productivity should not be thinned too heavily. Don't worry if terminal bearing
trees do not look as pretty as trees of other growth types when you are done pruning.
Young terminal bears and spur types both tend to have blind wood. Delaying pruning until late
spring will encourage more branching on blind shoots. Bearing apple trees may be pruned once
they have stopped growing for the season and after exposure to freezing temperatures. Pruning in late
spring induces more bud break. Pruning after bloom, called delayed dormant pruning, is de-energizing
and is a useful practice on trees that are overly vigorous. Avoid pruning before a cold event,
as pruning reduces the tree's hardiness for about 10 days. The greatest loss of hardiness
is within 48 hours of pruning. When the forecast indicates a potential drop to about negative 20
degrees Fahrenheit or a drop of more than 50 degrees and into negative numbers, stop pruning
until the severe weather is past. Pruning is a cumulative process. Apple trees rarely have perfect
forms and you do not want to remove every branch that is less than ideal. Prune only as much as
Consider tree vigor, cropping, and natural growth habit. On large trees, you can make about three
big cuts and remove up to about a third of the smaller limbs. It takes about three years to do
corrective pruning on neglected trees. On narrow canopy trees, such as the vertical axis, you can
make about one large cut per season. This should be a bevel or dutch cut, as described earlier,
for the purpose of limb renewal. Although pruning is a dwarfing process, it isn't a
substitute for natural size control and should be used as an aid, not as a means of dwarfing.
Avoid severe pruning. Bend a limb rather than cut it out when possible. Trees that are pruned
too heavily will have reduced cropping, excess wood production, and will be less efficient.
On trees that seem to need heavy pruning, save some cuts for next year rather than sacrifice
fruit yield. Modern orchard planting should be pruned carefully to maximize cropping
and fruit quality. Fortunately, if you remember some basic pruning and training principles and
techniques, you will make a huge difference in the success of an orchard operation.
A main goal is to create windows to increase light distribution. Use thinning cuts in most
situations. Reserve heading cuts for portions of a canopy where increased branching is desired.
Use a bevel or dutch cut for scaffold renewal where a limb has become overly vigorous. Ideal
angles for permanent scaffold limbs are 50 to 75 degrees from vertical. Pyramid-shaped trees
intercept the most sunlight. Maintain a tree structure that is wide at the base and narrow
at the top. With the heaviest diameter branches in the first whorl and the branch diameter
gradually decreasing in upper tiers. Avoid pruning before a cold event. Avoid severe pruning.
Pruning is a cumulative process. Prune only as much as needed, bending some limbs rather than
removing them. Save some cuts for next year. You will take tremendous pride in apple blocks you
have handled in this manner, as your impact on the orchard enterprise will be obvious.
The apple trees will have better light quality, which will lead to higher productivity
and better fruit quality.
