Cutting Dados With a Crosscut Sled - Tablesaw Jigs

Sparky Deal
161 followers
Follow me on social media
https://linktr.ee/GerberDesign
Check out some of my affiliates Use GERBER10
https://linktr.ee/gerberaffiliatelinks
#DIY #howto #woodstuff
Comments are disabled for this video.
So again, I'm using this crosscut sled.
I made this specifically for this build and I'm using a flat tooth grind blade as well.
So that way I just had a little more control than when I was using the dado stack.
It is some extra work, but I really think the results spoke for themselves in doing
this.
I will also link that blade below.
And then this next part with the stretcher, I learned a little lesson here.
So I made something right there, as you can see, to the thickness of the dado, but that
didn't account for the thickness of the blade.
So basically I had to make something, the thickness of the dado plus the width of the
blade.
So that was that little stop there.
And if you do that, you get a perfect dado every time to match your leg pieces.
Then you can see here, tested them, they both fall into place perfectly.
