Timber Framed Barn Part 6 Forms Off - Foundation Finished.

Nature house
148 followers
#NaturalHouse, #EcoHome, #SustainableLiving, #GreenArchitecture, #EcoFriendlyHome, #OrganicLiving, #NaturalLiving, #EarthFriendly, #EcoDesign, #HealthyHome, #GreenLiving, #SustainableHome, #NatureInspired, #EcoHouse, #EnvironmentallyFriendly
Morning everyone, so time to start a new video. In the last video we got the concrete foundations
done, that was like two weeks ago. They've been setting ever since. Hey puss, you on the hunt?
You on the hunt for a mouse? And yeah, there's two weeks setting now, so I'm gonna start taking
the forms off. I haven't been doing too much for the last couple of weeks, just trying to
get myself ready for this really really hectic month ahead when we start doing the framing.
So yeah, let's go up the top and get the forms off. Hopefully the concrete looks good underneath.
So that has turned out really well. They're all getting that chamfered edge, which I'm hand
cutting with a grinder. Yeah, well happy with that. So a few people in the last video were
asking about drainage and saying, oh you should put in some drainage. It's getting the drainage
system, it's just I'm just not ready for it yet. Between these pillars is stone walls getting built
and then in this gap behind here, this is a French drain that takes water down. There's a drainage
stitch down the other side of this building in that wet spot over there. It's like a boggy area
with a drainage ditch. So yeah, there's a French drain going in here with clean gravel and all
this runoff from this field goes behind the building. So there's a wall built between these two.
It's just that the framers are going to be here before we have a chance to do that.
So we just need to get that done before the winter. So we've got ages, no rush for doing that.
Right, got all the forms off. It actually took a long time. The one I filmed was really easy.
They came straight off. Some of them were kind of buried a little bit deeper and it's taken me
and a helper all day to get them off. So tomorrow I'll get them all chamfered, tidied up and then
we need to put some fines down, get it leveled off and then that's it. Done. Ready to put a
temporary structure over it all. It's skin off my knuckle as well. Yeah, carry on tomorrow.
Morning everyone. So yesterday took all day to get those forms off. Some of them were just
absolutely jammed in there. Of course, we could have just cut them off at the bottom,
but I decided I'd rather get the plywood out where possible. So, but yeah, it was a battle.
But yeah, today I'm going to cut all the corners off, chamfer them, tidy them up
and then I'm going to try and get some fine stone delivered just to get it all nice and flat
and level because the flatter and leveler it is, the quicker it'll be doing the joinery.
Because we don't have to mess around propping up stands and things,
trying to get things level and then we're going to get on to the milling, do some more milling.
After they're chamfered off, they're quite tidy really. I'm pretty happy with them.
So after filming that first one, I just had to put my ear defenders in, put a podcast on
and just grind all day. There's 19 pillars and four edges on each one.
You know, it takes about five minutes to cut each edge or so, something like that.
Get them all worked out and marked up and nicely looking. You know, it was six hours of solid
grinding to chamfer all those edges, but they did turn out really nice and it's much better
doing it like that. I got much better finish by doing it like that than if I'd have tried to
form them in the concrete. So yeah, so I just spent the rest of the day doing that. I got through
about 20 batteries on the grinder and just a lot of podcasts. Yeah, it went well. I'm really pleased
with it. Oh, what a big tiger. What a big tiger. Shall we get to work? Morning everyone. Come on,
time for work. Come on. Morning everyone. Oh, I've got this dirty lens.
That's better. Right. So I've got a 10 ton of stone coming. Is she coming? No. I've got 10
ton of stone coming later on today, but only at like, I don't know, two or something like that.
So while I'm waiting for that, I'm going to get on and get a bit of milling done.
It's a cold northerly wind today. So, but yeah, we'll get a bit milling done and then we'll get
back on the foundation. Right up at the mill, I had a bit of a bad start. The button on the winch
got jammed and it just kept going up and up and up and I couldn't stop it. And it broke the bracket
that holds the fuel tank because it hit that bar. So I've got it cable tied on at the minute just
to get me through today. Yeah. So that's annoying. But right. I've got this big,
nice log on here and you get a nice eight by 10 out of it. And also I'm going to take these slabs
off and then resaw them and they're going to become two by fours for the temporary building.
So we get a load of two by fours off of all these edges and a few cladding boards as well.
Yeah. And then we'll be on our way to having the timber for the temporary building as well.
A lot of people with milling will now do this edge. So you don't have to turn it as many times,
but that's a really good way of ending up with a parallelogram. If you've got any discrepancies,
if you do opposite faces, you're less likely to end up with a parallelogram. That's what you do
generally when you're doing woodwork is you don't work your way around a square. You do opposite
faces and square off those. Um, so that's what I do. It just means a lot more turning. Yeah. Get
this turned around and then, uh, we'll make some cuts. So really ideally I have the, uh,
the small end up the other end. Um, but when they're the wrong way around like this,
get measurements from, from this end. So that's my timber I want that's centered on the pith.
And then I want to get a 50 mil out of that 52 by four out of that. So then if I set that there,
I can set a zero on my gauge here. I'll set it at three 50. Remember that
go back this end. And then when I'm at three 50 there, that's going to leave me that 50 mil.
So I'm going to come out here, leave me that 50 mil. So to make another cut, then put that slab
down there to re-saw into two by fours. I'll do the same over here, same over here. And then
end up with a timber and four slabs. We'll then get two by fours out of, well, maybe not that one
actually, but yeah, we'll try. Forgot to bring my sawdust bucket up. So I'll go down and get
that at lunch. But for now I'll just let it go on the floor. Cause it's only a bit of sawdust.
Here we go. Here defenders.
but it's okay. We'll just face that upwards. It'll be fine. Yeah. Nice timber.
a nice eight by 10 and one, two, three, four, five, two by fours. That's good going really.
They're not great two by fours, but they're only for that temporary building.
Right. I've just had a call and my stone's on its way up. So
a 20 ton coming now. So we're going to sort that out.
Right. We've got all of the foundations all tidied up, all of the chamfers done
and they're looking really nice and tidy. Actually. I'm actually really, really pleased with it.
So now I just got to, now this is all gone hard. We want to get this, uh, 20 ton of stone spread
out, fill in the ruts from the concrete truck, just get it all smoothed off and, um, compacted
down. So we've got a nice flat surface to work on. So we didn't twist our ankles on these,
on this bigger stuff. All right. Be a lot of work in the tractor.
So that first lot of stone that went down, um, in the first foundation video was a four inch
stone down to dust. And that was to get us out of the mud. Cause you saw how muddy it was.
And, uh, that's all hardened up now. But when we drove the concrete lorry over it,
everything was sinking into it. Even the digger was sinking into it when I was laying it down.
But cause that's gone hard now, I'm happy that anything I put down on it now is going to stay
where it is. So this is a 40 millimeter stone down to dust, which will be a much finer, uh,
stone, uh, less ankle twisters lying around with this stuff. So yeah, just use the little
tractor to distribute it around using that spring time Harrow to sort of help rake it level as I go.
And, uh, honestly, I don't know what I'd do without this little tractor and front loader,
you know, that little tractor front loader can move that 20 stone, 20 stone, 20 ton pile of stone
in, I think I spent about two hours doing it and use about a liter of fuel.
So amazing little machine and, uh, saves renting a digger for it. Yeah, just went around,
smoothed it all off, got it as close as I could by eye and then, uh, level the rest of it by hand.
Got most of the stone dragged out. I think I'm within sort of 50 mil or so all over.
It's quite easy to gauge cause all these, um, pads are fairly consistent. So yeah,
I know I've got a little low spot here. I'm, I'm so close now. I'm going to do more,
uh, damage or mess it up more with the tractor and take too much off or dig in or, you know,
sometimes you can do the rest by hand. I'm sure I can get in somewhere with this.
The worst part of a building is getting this foundation in or getting a foundation in
is where all the problems start from. It's where all the mud is. It's just the worst bit.
We've nearly got it. Right. Let's see. So our reference point of level
is just at the top mark on that nine. That's our reference point. Let's see where we're at.
So we are, I know you can't see that very well, doing me best to line it up, but, uh,
tiny, tiny little bit low, about 20 mil, nothing really. So that's what we're doing here. Look,
that's what we just sighted through, sighted through that. And we're just on the, uh, the,
just, uh, just above the bottom of the E. So we are about 20 mil low there. So really nothing,
especially seeing as it's not even compacted all over yet. So we're very close now. I'm not going
to change that just yet. We'll just look around some other spots to have a look here. This looks
like this could be a touch low and that is actually a tiny bit too high. Interestingly.
Okay. So that could actually come down a little bit, but it needs a bit next to that,
um, next to that pillar. So scrape some over there. So yeah, we've got a tiny little high spot
keep going around doing that slowly creeping up, trying to get the levels, right? There we go.
That is the foundation done. Well, I suppose it's not really done. I've still got to do the
back wall. I've got to do all the little walls around the inside and the drainage and everything,
but it's done to a point that we can, uh, we can get on and start the frame.
And I think it looks a lot bigger from, uh, from up there that you think it's going to be quite
the building once it's done. So the next job to do is erect a temporary building. The temporary
building is going to go from here, this post over to that post. So this whole thing will be a
temporary building covered in, um, in polytunnel tarp. And then this here will be where we stack
and store all the timbers. And then once, uh, all the timbers are joined, all the joinery's done,
everything's stacked up here, the temporary building will come down. And then once the
building's done, the whole frame will go up in, you know, three or four days or something.
And yeah, we'll, uh, we'll have a barn. Very exciting. What a relief it is to have that done
and not only done, but done to a really high standard. So really pleased with that. It did
test me. I felt like at some points I couldn't do it, but we got there and that's the thing.
Building buildings is really, really hard work. Um, putting it into a 10 or 20 or 30 minute video,
you know, I have to cut out all of the worst bits. All of the hard work is cut out. Like this is an
enormous amount of work, even with machinery. And, uh, it tested me and that's the thing,
you know, you have to do things that test you in life. And that's what I do all the time.
And this was one of them. It tested me. I got through it and now I have an enormous
sense of achievement because of it, because I'm proud of it. It's great. It's perfect.
It's exactly what I wanted. And yeah, I get a sense of achievement, but at the time it was not
very fun, really difficult to do really hard to film. And, uh, I also understand that it's not the
most entertaining thing to watch, but it's done. And now we're going to move on to doing some
nice, uh, timber framing and woodwork stuff. So a little bit of milling, temporary building,
and then we're onto timber framing. All right. Hope you enjoyed the video and thanks for watching.
