15in work wreath blue 21in deco mesh red and white striped 21in deco mesh navy blue Ribbon 1.5in Blue with stars ribbon 1.5in Red with stars ribbon 2.5in White embossed ribbon 2.5in Blue and white striped with stars
Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori. Find you when i will be live https://bit.ly/33x7Oyf
Affiliate links for tools used. If you purchase i will get a few pennies for the purchase. About enough to buy a stick of gum :) It will not change the amount you made.
[Music]
hey I'm Lori welcome to my channel we're
going to be doing something super fun
we're going to be making another 21 in
method I'm going to use two different
colors because I think with this method
it's a lot of fun to see the two
different
colors this method is called The Jackie
weave so Jackie created this when she
was trying to do the poof curl I thought
that was kind of cool was actually a
very cool method and I think you're
really going to like it so so for this
method I am going to use a work wreath
but if you don't have a work wreath and
you want to use the Dollar Tree wreath
all you need is to put 10 Ties on the
bottom and eight Ties on the top that's
what would the work wreaths have I'm
going to put these two on my mesh roller
and it's going to make it a lot easier
for me to cut these out okay so this is
my mesh roller and you can see I can put
two on here at
once just like that and then it's easy
for me to pull them out so I can cut
them at the same I also have a tendency
to want to hang my wreath frame from
this top one because I just don't use it
very often so all I'm going to do is cut
10 in so 10 in
pieces I'm going to use my rotary
cutter so so mesh will tend to fray but
it's going to fray less if you use a
rotary cutter if you use scissors it's
going to fray a lot
more so please invest in a rotary cutter
all right so I'm going to get these cut
out and then I'm going to show you how
we're going to make this okay so I have
some mesh cut up so let's start working
on putting some of these in our frame
the first thing I do is open up my frame
so I can start putting things in this
just saves you a lot of
time because you don't want to have to
be trying to put something in while you
are while you are trying to open the
ties at the same time okay all
right and this method is really just
using the curl okay just the curl
method curl method is super easy all you
have to do is start to tuck it under
and roll your mesh just like that just
like a little
curl then you're going to fold it over
all right so this is similar to the
awareness
ribbon you'll see that it's actually
very similar because you're going to set
it
down and tie it off just like you would
with an awareness ribbon the difference
is that you're going to put another mesh
through this little hole
that's why I think this is going to be
so much fun with two different colors of
mesh so see we have our other curl
here and so what we're going to do is
we're going to take one end I'm going to
pull it through that
hole just like
that bring them back together and tie it
down so like a chain link kind of like a
chain link that's what it reminds me of
and I think that is so cool Isn't that
cool all right so she calls it the
Jackie weave because it's kind of
weaving in and
out so let's do another one so you can
see how it works when you're going on
the other side you're going to have two
curls together and you're going to have
the poops kind of inal linking in the
middle so just curl
I find the best way to curl is to do it
kind of on the
sides it will want to pop out but just
kind of push it
in then we're going to put our curl over
here on this
side see and then we're going to have
two curls kind of right there together
pull them up and just let them kind of
you know have a little fun curling
around each other so you see what I do
is I kind of go to the ends and I tuck
with the
ends because the ends are what you want
to be tighter and not as much in the
middle all right then I
just put this through link it
through and then pull it
together isn't that fun this is such a
fun method I think you just keep doing
this all the way around
okay so curls go here Link in the middle
so curl link curl link curl link
curl that way it kind of works out all
the way around so let's do one more and
then I'll do the
rest
okay all right so at the
end okay you just pull it
together put it down so you want about
what is this about 3
in yeah about a 3 inch little curl you
could do 4 in but I want to really see
my links so I want to have plenty of
Link but you can have more curl or more
link there's no right or wrong
way everybody does these
differently okay pull it through tuck
that little piece under CU it will want
to come
out there just like
that I love that okay so I'll do the
rest of the bottom and then I'll come
back and we'll start working on the
[Music]
top all right so you can see we've
gotten all the way
around isn't that fun see how you can
see the
links I like that so we're going to do
the same thing on the top so what I'll
do is open up the top ties and I'll kind
of move the bottom ties down a little
just to make sure they're not going to
get in the way and I'm going to do the
exact same process on the top
okay so curl up the
ends fold it over tuck that little piece
in
put it down so three to four 3 to four
inches
here okay and then we're going to do the
link
okay push it right
through right
so do your
link or your
weave okay and then
down on the other side all right there
there we go all right so I make the ones
on the top I generally make a little bit
tighter because I want them to kind of
push down and cover that little Center
area all right so I'll go around and do
this
one and then we'll come
back and I'll show you what it looks
like
[Music]
Okay so we've gotten all the way around
all right so this
is 10 in pieces so we have five of each
color on the bottom and four of each
color on the top so that would be nine
of
each okay so you're still going to have
mesh left over if you want your wreath
to be Fuller we can do a second layer on
the top now what I want to show you is
you can actually do these and then put
them on
so whatever way works easier for you all
right so I'll do this okay put it in my
little tool
here all right then do the other
part put it
through okay and then come up here and
put it on I'm actually going to go over
and
do let's just flip it and do the
opposite that way we'll get a little bit
more color
coverage
okay there we go all right so what this
does is this creates a third layer so it
really fills in that
mle all right so let's do that one more
time
okay so make our first curl now if you
don't have a tool you could use a
clip or bow maker bow dabra something
like
that
okay put it right
through there we have our link this mon
might also be a little bit easier way to
see see the
link
okay then I'm flipping it over so I want
the blue to be on this side and the and
the red and white on this side which is
opposite of how I had it you can leave
it the same if you want but I am going
to flip the script and do it
Opposite so I still want the curls
together
and the poofs together but you see how
it makes that third layer and then we
can have a lot more
fullness okay so I'll finish this
up and then we'll take a look at how it
looks okay I've gotten all the way
around look how pretty that is you can
see the curls you can see the
links just looks so cute so look how
nice that looks doesn't that look nice
how fun is
that and you see and this looks great we
haven't even put anything on it but it
looks really
cute if you see any areas where you're
kind of seeing the frame what you can do
is tighten up on
the little link a little bit and just
kind of pull things down so that it
covers it up
okay so see like we have a spot right
here so we just have to pull out our
curls and then that spot's fixed put
our ribbons on it okay so for our
ribbons we have this really pretty light
blue and white striped it does have the
Navy and the red so it's still going to
work but it's going to brighten it up a
little and then I have a 1 and 1/2 in in
the white
I have a blue navy blue with the glitter
and then I have a red with navy blue
white and red so I'm going to do these
at 12 in I'm going to put the White and
the red with the Stars
together all right I'm just going to use
my
comb to cut them quicker
so on nine I want nine of this and nine
of the other
set okay
and I am doveet
tailing all of them so all you have to
do is fold it in half have it up like
this and cut up towards that wired Edge
if you hold it up then you won't cut it
the wrong way so once I have the ribbons
ready I'm just going to fold them in
half kind of crease it right down there
and then
pinch where that crease is then I just
get a little bit of a curve
underneath then I will go to my
frame and I will tie it
in I just kind of twist my tie
down
then I will stretch out my
ribbons okay so I going to do this all
the way around the bottom but let's do a
couple more
together so pinch in the
middle get a little curve that curve
helps you to get
it to stay
up right so see how that curve
helps okay there we go all right let's
do one more and then I'll do the
rest and come back
okay so I'll do the rest and then come
back and I am alternating them
[Music]
okay so I've gotten all the way around
all right so now I'm going to do the
top okay so same process finding the
middle getting a little curve and then I
place it down the difference with the
top is I'll do more like an X with my
ribbons it's hard to do this on the
bottom just because of the the way the
mesh
is okay but up top it's very easy to do
this
[Music]
okay so I'll finish the rest and then
come right
[Music]
back okay we've gotten it all the way
around look how pretty that
is okay so I have two sign
options I really think I want to use
this one so this is kind of a faux
stained glass
flag and then this one one yeah I like
that one better okay so we're going to
use that one uh you could also if you
didn't want to do patriotic you could do
something like this so this has all the
colors but it says nothing about
patriotic in it so normally I put them
in the
middle and I think that's what we're
going to do and then we might make like
two or three bows to go around the
sides all right
okay so one at the top one at the
bottom
okay get out our wire so this is just 26
gauge
wire I cut about 20
in okay and then I'm just going to
put it right through the hole I
made okay and kind of double up the
wire if you're using metal signs it is a
lot better if you use a hole punch and
wire it's also a lot less
expensive than using those
adhesive
mounts the adhesive mounts can come off
especially in the South that's what we
have a problem with okay so I'm going to
put it right in the
middle I'm going to take one of my
plastic weaving needles and use that to
tie it on so I just run the wire
through and then I can push it right
down through the
mesh you can see there it is easily
comes out on the other side
then I can just twist it around the
frame and trim it
off just like
that
okay we go now let's do the other side
then we'll pull out some of the
ribbons
okay so same exact
thing there it is
is okay you just want to tie it on the
bottom or the
middle just so it doesn't scratch a
door
okay all right now let's kind of pull a
few of our ribbons out here and these
are wired so you you can kind of bend
them so that they won't go over the sign
cuz you don't want to cover the sign
either you can also kind of go off to
the
side
okay all
righty get that pretty nestled in
there okay kind of move some of these to
the side a
little there we go okay now I was
thinking we could put some cute little
little bows here we could either do like
three or four just small ones okay so
we'll do a couple with
this
okay all right now I'm just going to
grab
some white and then we'll put the blue
on with it so I'm going to do a small
tail like seven inches and we're going
to do a spider bow so it's small
Tails it's the three Loop bow just kind
of with extra Tails all right we're
going to go smaller so like 5
Ines
okay all right five inches I'm just kind
of looking at
my little bow maker to see okay so three
Loops that's three Loops in toe total so
you'll have two loops on one side one
Loop and two tails on the other side
okay so then we'll trim this
off okay doveet tail
it all right now the trick to this bow
is that you now want the two loops on
this side so just pick up your bow maker
and twist it that way you get you get to
move them
without having to think about what side
you're
on okay so we go down sideways in the
bow maker we twist it twists on the side
you're making the
loop
okay of course that last one you don't
twist you just pull it
out and trim it off
okay right now let's do the blue
okay so again pick up the bow maker and
turn
it there we
go
okay same thing three
Loops there we
go short
tails and we'll grab a pipe
cleaner go underneath and just get get
that
started pull it
out all right so you can see where it
was in the bow maker right there so hold
it lightly slide it around and get it
started you don't want to tie it
completely until you get a zip tie under
it so I'm just going to run a little I
said zip tie pipe cleaner but you can
use zip ties right so then I'm just
tighten it as much as I can first thing
I do is pull out my Tails I want to make
sure that they are on the sides so one
on each
side okay one there one there okay so
you see how kind of looks like a
spider all right then you can pull
your Loops
apart all
right then I'll hold what's on the
bottom and it so I'm just going to twist
it back and
forth so I can break it from that Center
then I can get a much better fluff and
you always want to do one side and then
the other so see how it has three up
here at the
top okay let's run our
hands under those
Tails there we go
okay just left the other
side and I'm going to make I think I'm
going to make four just like this so
just
small
okay I will kind of angle
these okay that one's already angled
all
right I'm going to set it aside and do
another one just like it now you could
vary right so you
could put the blue in the middle and the
white on top you could put this on top
with this bow it doesn't matter you can
do any way you
want as a matter of fact I think we'll
do let's do one
with the white on the bottom
okay here we
go all righty
so five inches short
tail
okay 5 Ines you can put your finger
there if you're having trouble getting
the right
measurement right there pull it out Trim
It Off
there we
go okay now let's do the blue so flip
it okay out to the
seven
okay 5
in 5
in 5
in turn it
off and then we're going to flip it
again and we're going to put this on
top so you can see it is totally fine to
put the larger ribbon on top and I do
like to do that a lot just because then
you can really see the pretty
pattern and it's kind of fun if our bows
are a little
different
okay so it's the same ribbon but just
kind of making it a little different as
we go so we
have two with this light blue stripe now
we'll do two with the
other exact same process just take your
zip tie go under one side doesn't matter
which side just make sure you're under
all of it get it started pull it
out hold slip it
around make sure you stay in that
indention so you can
even kind of push your ribbons flat like
this to make sure you're staying inside
that indention and then you won't have
trouble with your Loops getting off as
far as the
length so if you ever end up with you
know too much on this side and not
enough on this side if you will do this
trick it will really help a lot okay so
tighten it
completely pull our tails on either side
there we
go
okay okay all right then we can do our
Loops all
right all right now we can fluff
everything so
fluff
fluff make sure that tail is staying
where it needs to
okay so you see how that is just kind of
bent down in there when you do
this it allows you to pull that out if
you try to pull it out without loosening
it it's very hard so that's why I do
that twisting like
that because it does does get stuck down
in that zip tie and it can make it hard
to get those little pieces
out but if you loosen it then you can
get them and you'll get a much bigger
better fluff if you don't have pieces
stuck down in
there
okay let's trim these little
pieces okay that one's
fine there's the white one
okay trim off the excess zip tie okay
all right so we have two so
far all right let's
do the one with the
white okay
so this is
embossed ribbon you can see it has
little like leaf and flower patterns on
it I like this a lot because it's very
inexpensive but it's still
pretty okay so 5 in short
tail see how we twist each time we come
to the center until the end and then we
don't we just pull it out
out trim it
off
okay there we
go
okay so I have this really cute little
stars
one I want to put this one in so
twist and this one has is two-sided
ain't that
pretty this one would have worked with
this as
well all right flip again then we'll do
our
red okay
so you definitely want some of the
ribbons from
your project but it certainly doesn't
have to be all of them and you can
definitely mix and match change them up
especially in the
bow all
right there we go okay zip
tie
underneath pull it
up find your indention hold it slip it
around see how you can just kind of move
your ribbons and make sure they're in
that
indention and then you can put your pipe
cleaner under and you can go ahead and
tighten because you have everything in
the right spot
okay so pull everything
out tails to the
sides
okay Loops
out there we go okay now we can
fluff so twist back and for for to
loosen those little pieces that are
stuck down in
there Brun your hands under
the
Tails and make sure you do one
side and then the
other just like that
here we
go
perfect see how pretty that
is all
right okay and then we'll just
trim a little bit
that one's
okay there it
is okay so one more okay
so I'm going to stick with white on the
bottom cuz there really isn't any
special pattern with the white so it's
just fine to stay on the
bottom okay
all
right go ahead and doveet tail it there
we
go let's switch them around let's
do the red in the middle so flip the bow
maker
okay short
tail we
go okay flip again
just like that and then we'll do this
one you could even flip it over to do
the other
side
right
five five
and and
five all right
all right slip our zip tie under the
[Music]
bottom
okay get it started pull it
out all
right slide it around then just make
sure it stays in that little Channel
put our little pipe cleaner under
tighten there we go all right let's get
our tails on opposite
sides there we
go don't be afraid to pull on the ribbon
it's in that zip tie it's not going to
move if you have trouble tightening the
zip ties they do have a tool
called a zip tie gun that will tighten
and cut it off for you so you can get
those on Amazon it's in my Amazon
shop okay so back and
forth
there just like
that
okay we go
remember just do one side and then the
other it's just going to help you keep
them from getting mixed up so if you get
to the end and your bow looks odd it
might be because you got lost when you
were going back and forth it's really
easy to do when you haven't been doing
them very
long we'll just pull this back
and I'm going to tie the bows like right
like in four places
around around the sign I'm actually
going to tie that
to the middle ring so I'm going to show
you so I'm just pulling them around and
tying it on that middle
ring that way it's not all the way up
that it would ENT
interfere interfere with our
side and it's not so low that it would
fall off so there we
go see how the little legs kind of look
like
spiders let's trim that that
okay if I find that a tail is too long
I'll go ahead and trim it
okay there we go let's do one here in
the middle okay so all I
do is go here just use my hand to kind
of move the mesh aside to find that
middle that middle
bar right just like
that okay then I can tie it on
I have to lift it up so I can see
okay and I just trim off the
excess right and then just kind of
straighten the bow look
for tails that are too
long okay those all look good okay that
looks good
okay let's do one here I probably should
have made it so that they alternated a
little more we may move one of
those okay
so the metal
bar I didn't realize that I had just
kind of put them right next to each
other okay there we
go yeah that's way too long
okay okay let's trim this one off a
little there we go all
right there all right looks it's
fine because it's going to be that way
no matter which I why I do okay
so
again I'm tying in the middle on that
middle
bar right and then we'll kind of
straighten it and make sure we can see
our
side
okay there all right now let's just pull
our sign up a
little
okay there we
go all right let's take a look at it
okay there we go oh how
pretty so you can see the
side you could always trim off some of
the Tails if they kind of get in the way
there we go now we got it so we've got
all our little bows on
there oh that's so
cute that's super
cute all right I hope you enjoyed that
so make sure
to like And subscribe and make sure you
hit the Bell icon so you know when I
will be going live or uploading
something new because it will send you a
notification right to your YouTube all
right y'all have a great day and thank
you for watching and I'll see y'all soon
bye y'all
[Music]