It is wonderful to explore wild places on a bike but what if it breaks? What if you have a
mechanical? How are you going to get home? In this video we'll go through the things that are
most likely to happen to your bike when you're riding somewhere lovely and wild and then how to
fix them trailside at least well enough to get you home. It is quite a long video but I've got
After my recent video on the Isle of Jura I had a comment saying I'd love to ride wild places like
that but what if I had a mechanical? While this video is no substitute for a trail fix course
which many providers run it'll give you a place to start. Just seeing how a good mechanic works
I learned a lot. That expertise will come from Ben a regular mountain biker and a mechanic at
He'll cover the most likely stuff you'll face. If you want to skip ahead
use the chapters in the description. Save this video and come back to it more than once.
We'll cover tubeless tire repairs, easy ones and big splits that need a tire boot,
truing a wonky wheel including what to do with a broken spoke and we'll start with the drive train
a snapped chain, a bent hanger or when the gears start to fail and we will assume all was working
well when he began your ride. You notice your gears aren't shifting as they should so visually
inspect the chain ring and cassette for missing teeth, a kinked chain or a damaged derailleur.
If that's all right it's either your cable or your derailleur has been knocked out of line.
Over to Ben. So what you're looking for when checking your hanger and derailleur alignment
is to make sure that from where the chain enters the cassette here at the top to be in line all the
way down to your jockey wheels here and here in the cage of the mech so this essentially from the
top of your cassette here where the chain joins right through to where your chain leaves at the
bottom of the derailleur all that should be a nice vertical line. Either your hanger or your mech
could be could be slightly out of alignment sometimes it's difficult to see if it's only
small but if it's a big hit that you've had you'll notice it fairly quickly.
We've picked a great place to do this haven't we? Hello! If it all lines up work out which
direction you're having problems shifting so you can add or remove tension from the cable.
Say the chain's sat here just now and we've shifted to the next cog up here but nothing's
happening you would then that's where you would then add tension with your barrel adjuster here
sort of I say one or two clicks you'll feel that they have a little bit of indentation as they go
around sort of a quarter turn at a time almost so a couple of clicks just anti-clockwise and then
you maybe need to lift the bike give it a pedal round and just if that shifts up nicely then
you know you've kind of got it in the right place. If it's still not going add another couple of
clicks and just do a little bit at a time. The other way? So on the other way if we're trying
to shift let's say down to this this cog here we can't get it to shift you click down on your
shifter and nothing's happening again back down to the barrel adjuster here and we're adjusting this
clockwise this time to try and bring the chain down into this smaller cog here and what's that
what that's doing is releasing tension on the cable here and allowing that chain to drop.
If it doesn't line up chances are your hanger is bent. A hanger attaches the derailleur to the frame
and is designed to bend or break to save the much more expensive derailleur itself. What it does
mean though is your shifting can go out of alignment so you might need to out on the trail
if you don't have a spare hanger what you might need to do is just physically manipulate that
hanger back into more the correct position and we're just gonna be doing that visually because
you're not going to have any alignment tools or anything like that so you're just sort of
moving it checking from the rear again and trying to just get it back into that aligned place
uh sort of purchase on the derailleur as I can almost to protect the derailleur as much as
anything else. See if I can bend that out there maybe try and see if I can get your shifting to
go bad. I'll try not to break your derailleur. You could actually break your hanger. You can
break the hanger especially if it's taking a big knock it may already be cracked so then yeah if
if you're then trying to move it back into position there's a there's a chance it may snap
which is why you should have a spare absolutely so I'm interested to see if this uh if this has
yeah there we go so bent it out once one shift down just from that sort of change of alignment
in the in the mech so you actually just did that you actually changed gear by bending the hanger
see if we can put it back now I'll really I'll realign this for you properly when we get back
to the shop. The key points for me from that lesson were always carry a spare hanger and
they're different for each bike universal ones just not great and if your shifting is sticky
before you leave the house it's not going to get better on the trail. Still with the drivetrain
fixing a snapped chain is a lot easier nowadays thanks to these split links also called magic
links and this is how to use them. We have assessed the chain it's nice and it's still
straight it's just snapped at a link we've not any other damage um so still still good to use
a few bits to do to the bike before we refit the chain though and first of all we want to
make our lives easier by moving the derailleur down into our smallest gear here so caught up
in this cassette so we don't necessarily want to just shift down and drag that through the cassette
so what we can do especially on on these SRAM derailleurs is lock the cage off and just give
us that that bit of slack there. On shimano derailleurs often there's a clutch just in here
which essentially does the same thing and just releases the tension on the system a little bit
so once we've done that and we know it's clear with the cassette we want to come up to the bar
here and you're just going to shift down all the way so that the derailleur is in line with your
smallest cog on on the cassette here and again that's just giving us more tension a bit more
space to work with while we refit the chain and we're just going to thread that through
around the cassette and around your chainring to start with now i'm going to try and offset this
incorrectly to start with just to show most chainrings these days especially a single speed
will have a narrow wide tooth profile so you need to make sure that your chain is going to match up
into that and sink in nicely you see there that's not fitting if we move it back one there you see
it just sits down and around that that chainring nicely we're lined up on the on the bottom cog
here the smallest cog and we're going to thread our chain through the through the derailleur
and a couple of things to watch out for here caught myself out as well over over the years
there's often a little tab just on the uh the rear mech here acts as a bit of a chain guard
and about the chain guide you want to be in behind that tab so the the chain runs straight
off the cassette and down into that upper jockey wheel which brings us to the split link i don't
know if we'll be able to get that in shot there but an outer plate of a chain with a longer groove
on one side that allows the fixed pin to to pass into the into the link there so you might see
there we've got a couple of arrows on the links and that dictates the way the chain is going to
go which way this is going to be fitted to the chain and what we're looking for on the snap chain
is to have two inner plates at the ends of the the end of the chain that we're refitting to the bike
so what that'll let us do is fit those quick links into into there and form an outer link
on the chain that we're missing it is fiddly i don't know if you can come down a bit closer
there so you can see you're well in so those are the two sliding plates i was talking about
and all we're going to do line them up so they're flat either side of those uh those inner plates
and just sliding that back along until it's locked now this isn't fully locked yet and there's a
couple of things we can do just to lock that out and make sure the chain's nice and secure
on the sram derailleurs unlock that clutch to add the retention back into the chain
and i'm just going to free up the crank here just going to spin this slowly around
so that our quick link is now at the top of the chain there rather than at the bottom
what that allows us to do hold the tire hold the crank and give it a give it a pop there
and that's actually a lot very easily if we didn't get the nice snap that you normally do
once we've got that nice click you just want to do a final check to make sure that the pins are
located in these kind of slots here you want them located right at the back on either side
just check on the other side as well there and just to make sure from the top
that the outside plate is is nice and tight against both of those inner plates there
we're moving on to talk about what happens when your rim takes an impact
goes out of true or a spoke brakes
in this case the the spoke catching on the brake caliper as well so we can hear that there's
something wrong so first thing i'm going to say is we'll just find out which spoke it is
it's that visual assessment thing again before we do anything else we can check all around the spokes
and there we go this is our loose one here and worth checking others while we're here as well
we need to be able to spin the wheel to check how true it is once we've tightened the spoke
and use the fork as somewhat of a makeshift truing stand fixing the spoke all we really need is a
few different types we've got your sort of single size single sort of nipple size there that will
only fit one size if it's the wrong size for the nipples you have to probably round out the nipples
on your wheel brings us to one of these which is a spoke key that has multiple different sizes on it
so on this this one here you've kind of got a zero a one and a two and that's just your sizes for
different nipples we do also have multi-tools that have spoke keys on them so this is a kind
of tire lever sort of spoke key combo and you can just see these slots either side there have a slot
for your nipple that then you would you would fit on not always the best those because they're quite
long you can't get a full rotation around the spoke so they can be a bit more fiddly but good
to have on a multi-tool to get you out of situations like these i'm going to use this one today that's
probably what i'd recommend carrying a little bit heavier but if it's always in your pack and
you're swapping your pack between different bikes there's a good chance that will fit the something
that you you have and we need to find the the size on the spoke key that fits the fits the nipple here
so that's just trial and error and you want as snug a fit as you can get and make sure it's nice
and tight and we're just going to add tension to that spoke what that does is on your your non-drive
side if you tighten a non-drive side spokes that's your brake side where your discs are
that's going to pull it over to that side if you tighten the other side on your drive side where
your chain and cassette are that's going to pull it over to the other side and what we're really
looking to do is try and balance the tension between each side so the wheel is nice and
central in this case in the fork and that we're getting rid of that we're getting rid of that
wobble so going with zero on my on my spoke key here tightening at the moment i'm just trying to
bring that tension up you can see there we're we're not as tight as some of the other spokes
yet but we're definitely getting better than we than we were at this point that's probably where
i then started to spin the wheel and have a look and just see if we've still got that that wobble
so we've still got a little kick out to the side there but what we have got rid of is it
clatching on the brake caliper there so we know we're going in the right direction
and it's just a case of adding a couple sort of a quarter half turn at a time
and then back to have a spin and just trying to see where that kick is is happening if you've got
a bit of a kick and it's not too there's no loose spokes um you probably don't need to worry too
much but when you get to that point of having a loose spoke you would definitely want to try and
pull that tight and uh and just make sure that like i say that whole structure of the wheel is
sort of nice and strong there so if i was like if i was out riding myself i'd be pretty happy
with that now but because we're on video i want to try and get it spot on if i can
so you might find that you have a big impact and rather than a loose spoke or something coming
loose over time you end up in this situation which is the spoke kind of becoming fully detached from
the rim so in this case a snapped nipple actually at the the end but it could also just be a snapped
spoke actually in the middle of the spoke there let's say we don't have a way of fixing this when
right on the trail we don't have spare nipples with us we don't want to strip down our wheel
and remove the tape all we're going to do is keep this spoke out of the way of the fork or the rear
of the bike in the drivetrain and we're just going to do that by bending it around the closest spoke
to it so something along the lines of this and you're looking for that to be as tight into the
spoke and for the end to be tucked away nicely into the wheel there so that it's not going to
just check the spokes around you with your spoke key so around the missing spoke if any of those
are loose give them a little bit of a nip up so tension making sure they're not loose is more
important than the wheel being dead true at this point so again we're trying to get home and then
you can can swap this spoke out at home in your workshop or or take it to your local bike shop
and i'm sure a mechanic there will be happy to do the job for you so a spoke key is yet another
must-have for your tools and repair kit the most common repair they undertake at Nevis Cycles is
something which petrifies too many cyclists punctures and tears both tubeless and clinchers
we've put a hole in a tubeless tire you can see the sealant leaking out along with the air
tubeless repair kit here a few different bits and bobs in there rubber solution a couple of
kind of picks and tools to use there and then the plugs themselves so this is what we're going to
use to actually plug the hole in our in our tire and i've got essentially a small file here which
is just going to roughen up the edges of that hole we want to lift that out through through
the kind of middle of our tool there and just force that down it might reassure you to know
that the first and second times this didn't work the hole had to be roughened more the plug more
carefully placed within the poking tool but ben got there the idea is to push all the way through
and then pull it out sometimes it doesn't work so we've pushed one through it stayed in the tire
but what we've done there is pushed all the way through and then that's pulled plugged the hole
there and we can see that that's nice and nice and snug and secure fortunately this time we've
managed to stay seated on the rim the whole way around so in theory we should be able to pump this
up with a normal hand pump but what we're going to use is co2 applicator and a little bottle of
co2 so the idea behind these is that they give you a nice high injection high speed blast of air
blow the tire back onto the rim at the same time repressurizing things as we go so
handy handle there stop us stop us burning our hands on the the co2 attach your canister
applicator sorry to your to your valve and hopefully that's us reinflated and we can hear
a bit of air escaping just from the plug there so all we're going to do spin the wheel a few times
any sealant that's still in the wheel there is going to throw itself around and hopefully help
just seal up that hole around the edges of the plug that we've put in there there's just a little
essentially a little uh little Stanley knife and you can just take the ends off there so we don't
want to go too close because we want to still have a little bit of tail comes off there there we are
now we'll make an even bigger hole simulating a tear that the sealant can't seal and we'll have
to put in an inner tube so this is just like a clincher tire in addition we'll have to use
something called a tire boot to stop the tube squeezing out through the hole we made so to
remove the tire we've broken it off the bead there all the way that all the way around on on one side
of the rim and we're just going to use a couple of tire levers to get in underneath the the bead
careful not to to catch the rim tape underneath and then we can just use two at a time just to
lift one part of of the tire off there and then from there you can just gently run your tire
lever around and that's just going to leave our everything off the rim there so i don't know if
you carry anything with you Simon when you're you're in your tour and a bit of a rag or a bit
of a bit of blue roll or something but it can sometimes be handy just if you do need to to
clean anything off before you kind of refit uh especially with tubeless sealant get a better
surface just to glue our tire boot on on the inside of the tire there so we've got this sticky
side there and we're just going to push that up into the tire and try and make sure we're not sat
just on that the bead there and then we're just working that into the underside of that tire there
to try and get that to stick as well as we can once we're happy that's there we found our big
slice worth checking the tire over for anything else just in case we've got uh you know any other
thorns or or punctures there so we'll just slowly working around the inside of the tire there just
feeling for anything sharp we've got our old plug there but that all seems to be holding well and
we've worked our way back around to our boot there and we've not found anything to uh to worry so
I actually had to add a bit of pressure to the tube just before putting it in the
put it in the rim it just gives a little bit of shape and structure makes things a little bit
easier so then just fitting the tube essentially once we've got that structure in it I always start
at the valve hole and just like to try and tuck the tube actually up inside the rim there and
the theory with our boot there is that once we've put the inner tube in it will the pressure of the
tube will actually help seal uh seal that boot against the outside of the the outside of the
tire or the inside of the tire rather and then in theory that should help create a nice a nice tight
seal then as much as possible I try not to use tire levers to put an inner tube back in because
nipping the tire uh the tube sorry um and just pinching it slightly can spell disaster especially
if it's your last tube for reinflating a hand pump is going to do just fine you're going to
make life a little easier and use the rest of our gas canister from uh when we did our
tubeless repair earlier on so we're popping that on and then hopefully uh so let's just have a look
can't hear any air escaping which is always always a good sign and here we are so you can
still see the slice you can see how with an inner tube you'd have some of the inner tube bulging
through that there and with that tire boot just sort of spread across the whole tube there that's
then going to hold enough at least just to get us home um until we can uh until we can replace the
tire if you don't already have them in your field repair kit what we've used is listed in the video
description including a tire boot a spoke key that fits your bike quick links that fit your
speed of chain and a hanger that fits your bike frame on top of that there's a multi-tool pump
co2 applicator and inner tube which adds up to quite a compact kit i also carry brake pads for
that bike and a spare spd cleat but that's another video let us know in the comments if there are
other trail fixes ben could demonstrate and please check out one of these videos that really helps to
this one which sounds odd but thank you i'll see you again next time goodbye