Why do transformers make a humming noise?

Terrific Physics
40 followers
When we connect an AC generator to a closed loop of wire,
the magnetic field inside the generator
is going to basically push and pull the electrons in the wire
so that they constantly alternate direction
between moving forwards and backwards.
So the magnetic field is therefore constantly reversing.
The voltage is going to vary between its maximum
and minimum values because of this.
That's why we see a sine wave pattern
if we connect an oscilloscope to a power outlet.
This pattern repeats 50 or 60 times per second
depending on whether it's a 50 or 60 hertz supply.
The AC frequency in North America is 60 hertz,
but most of the world is just 50 hertz.
With a transformer, the frequency we put in
is the frequency we get out.
We can just increase or decrease the voltage,
not the frequency.
If we place a second coil of wire
in close proximity to the first coil,
then the magnetic field will induce a voltage
into this second coil
because this magnetic field is going to push
and pull the electrons in the second coil,
forcing them to move.
This is therefore a transformer.
Now we can just use two separate coils of wire
as a transformer.
It will work, but not very well.
The problem is that we're wasting a lot
of the magnetic field
because it's not in range of the secondary coil.
So we place a ferromagnetic iron core between the coils.
This concentrates the magnetic field
and guides it to the secondary coil
so that the transformer is more efficient.
However, this is not a perfect solution.
It will result in eddy currents flowing around the core,
which will heat up the transformer
and therefore wastes energy.
To reduce this, the core is made
of lots of thin laminated sheets,
which restricts the eddy current movements
and reduces their effects.
Although we will still lose some of the magnetic field
due to leakage flux.
We also get some losses due to the disturbances
caused at the joints.
We also lose energy in the wire and the coils
because they will always have some resistance
and this generates heat.
So in a transformer, we have copper losses
as well as iron losses.
The alternating current causes the sheets to expand
and contract tiny, tiny amounts,
which causes vibrations between the sheets.
And this is why we get that humming sound.
Check out one of these videos
to continue learning about electrical engineering
and I'll catch you there for the next lesson.
Don't forget to follow us on Facebook, Twitter,
LinkedIn, Instagram, TikTok,
as well as TheEngineeringMindset.com.
