🔧 Electrical Wiring Master Course 👉 Become an expert in wiring, troubleshooting, and modifications 👉 Perfect for electricians aiming to advance their career 💡 Price: ₹499 https://electricaltechnician.akamai.net.in/new-courses/7
📑 How to Read Electrical Drawings Course 👉 Learn to read and understand ACB VCB And other electrical panel diagrams 👉 Master circuit troubleshooting with ease 👉 A must-have course for all electrical professionals 💡 Price: ₹999 https://electricaltechnician.akamai.net.in/new-courses/3
⚙ VFD Programming and Troubleshooting Course 👉 Master Variable Frequency Drive (VFD) programming and installation 👉 Stay ahead with the latest VFD troubleshooting techniques 💡 Price: ₹999 https://electricaltechnician.akamai.net.in/new-courses/1
🔍 Advanced Siemens PLC & HMI Programming Course 👉 PLC Wiring 👉 Basic and Advanced Programming 👉 Analog Programming 👉 Encoder and High-Speed Programming 👉 Modbus Communication 👉 Run VFD with PLC 👉 Siemens HMI Programming 💡 Price: ₹1000 https://electricaltechnician.akamai.net.in/new-courses/12
💻 SCADA Programming and Designing Course 👉 Master SCADA systems for industrial automation 👉 Learn to design, program, and troubleshoot SCADA interfaces 👉 Perfect for professionals aiming to excel in automation design 💡 Price: ₹600 https://electricaltechnician.akamai.net.in/new-courses/13
Friends, if you are working in a company and you have been working for 2-3 years
and even after working for 2-3 years, if you don't know how to draw a simple drawing like this
then maybe no one is teaching you this.
And if no one in your company is teaching you how to draw,
then don't worry, I will teach you how to draw well in today's class.
Look, I have a drawing here.
There are two types of drawings in this drawing.
First of all, the drawing you are seeing here is the drawing of power wiring.
After this, through this drawing of power wiring,
two different motors are provided here.
As you can see, to start motor 1 and motor 2, a three-phase power supply is provided.
After this, to start these two motors, control wiring is given here.
Now, how do we need to lead them? Let's understand.
First of all, here we have R, Y, B and Neutral.
Four things are available here.
R-phase, Y-phase, B-phase and Neutral supply are available here.
Now, all these power supplies are connected directly to an electrical device.
Now, this electrical device or this symbol you are seeing is the symbol of fuse.
Now, how is the fuse?
If you don't know, then I will show you directly how the fuse looks like.
You can see here, this is our fuse.
I am showing you the symbol of this fuse over there.
As you can see, this symbol is of this fuse.
So, now you have understood what this fuse is.
Now, the power supply that is going through the fuse,
that power supply is directly connected to this device from here.
Now, what is this device?
This device that you are seeing, what is it?
See, this is a contactor.
You must have seen in the company or in your homes,
the starters, the panels in the company,
to make the power supply flow further,
to switch it on and off, we use a contactor.
Now, how does a contactor look like?
I will show you that as well.
This is our contactor.
We call this a contactor.
And in the contactor, you will get a power terminal.
As you can see here, L1, L2 and L3.
Three terminals are given.
Now, where is the power supply coming from on these three terminals?
From the fuse.
So, the R phase power supply connected to the fuse will come here.
The Y phase power supply will come here.
And the B phase power supply will come here.
After that, you will see here,
T1, T2, T3 terminals.
Along with this terminal, an overload relay of this type will be used.
The pin of that overload relay that has come out here,
we will connect all these pins directly here with this.
What will happen after connecting?
Whatever power supply we connect here, here and here,
that power supply will come out directly from this place.
The same thing is shown here in the drawing.
As you can see,
in this drawing, a contactor has been placed here.
Below this, an overload relay has been placed.
The overload relay that I showed you,
I told you to connect it below the contactor.
In the same place, this one has also been connected.
So, this is our symbol.
This symbol that you are seeing is of overload.
And the symbol that you are seeing here,
this is the symbol of the contactor.
Now, the power supply is going from the output terminal of the overload relay.
And this power supply is being given to start one motor.
Now, to give power supply to the other motor,
the power supply has been looped from here.
You will see,
what is coming here?
R phase power supply is coming.
So, this has been connected here.
After this, the second terminal is here.
You will see,
So, a wire is being looped from this place
and a Y phase power supply is being connected to the second terminal.
After this, on the third terminal,
a B phase power supply is being connected here.
So, another power supply of B phase is connected to the third terminal.
That means, there is another contactor here.
This contactor also has got a R, Y, B,
three phase power supply connected.
Now, you will see here,
below this contactor,
power supply is going to some other motor. So, you have understood this much power wiring.
Apart from this, you will see one more thing. Here, the neutral supply is going directly
ahead. Where it is going, we will understand that later. Okay. So, this much thing is clear.
Now, you will see here, the power supply that is coming, along with that power supply,
here it is going to some other motor. So, the power supply is going to some other motor.
Here, a device is connected. And above this device, it is written B and A. You will know
the meaning of B. What is it? Voltmeter. Voltmeter is connected here. Voltmeter. Okay. Voltmeter
is connected here. After that, A means ammeter. So, ammeter is also connected here. Means,
the power supply that is flowing, how much voltage is there in it? Plus, the current
that is flowing, how much current is there? To measure that, voltmeter and ammeter are
connected here. Now, you will see one more thing here. One thing is connected here. And
in front of it, it is written CT. CT means current transformer. You know, if more current
is flowing, then we do not connect it directly with ammeter. We take it through CT, so that
CT can measure our power supply. And its feedback, our meter is provided. And meter
will tell us how much current is flowing and how much voltage is available there. So, here
you will see, I have a meter with ammeter and voltmeter, in which current is shown here
and voltage is shown here. Means, in my power supply, in that power supply, whatever voltage
is there, I will get to see that voltage here. And whatever current is there, I will get
to see that current in this display. By the way, the picture of this meter is DC. But
you will get to see the AC meter in the same way. Now, to connect it, you will have to
use this type of CT here. The CT that I was telling you about is this one. Now, in this
CT, you will see two wires here. One is this wire and the other is this wire. These two
wires have a name. For example, the red wire will be S1 and the black wire will be S2.
Now, by connecting these two wires, you will get a terminal behind this meter, where S1
and S2 are written. Along with that, these two wires have to be connected in this way.
After this, to operate this meter, that is, to measure the voltage, we will have to provide
phase supply and neutral supply directly. That means, if you look behind this meter,
you will get four terminals here. For example, I put 1, 2, and apart from this, 3, 4. You
will get to see four terminals in this way. Now, this terminal will be called S1, this
will be called B1, and this will be called N. In this way, you will get P written here.
In this way, you will get a terminal. Now, what you have to do is, this red wire has
to be connected here, and the black wire has to be connected on S2. After this, your phase
supply here, the voltage that you have to measure, will be connected here, and the neutral
supply will be connected here. By making a connection in this way, this meter will start
Now, friends, look here, in our drawing, in that drawing, another electrical device has been connected, like this device.
This device is a single-phase preventer.
What is a single-phase preventer?
If you don't know, then let me tell you.
The power supply that is flowing here, like I said, a three-phase power supply will flow from here.
So, in the power supply, if the voltage decreases, whether the voltage decreases or increases,
or your one-phase power supply disappears, then in this condition, we don't have to run the motor.
And to avoid that, and to avoid running the motor, we have to use this device here.
We call this device a single-phase preventer.
Now, how does this preventer look, if you don't know?
So, let me show you this too.
Here, you will see, I have a picture, which is of a single-phase preventer.
If you use this preventer, then in this condition, as soon as the voltage increases, this preventer will immediately stop the power supply.
Even if the voltage decreases, it will stop the power supply.
Apart from this, the three-phase power supply that will come, if one-phase power supply disappears from that power supply,
then in this condition too, this preventer, this preventer will disconnect the power supply.
So, in this condition, how does it disconnect?
If you don't know, then let me tell you a little bit here.
Look, here you will get L1, L2, L3 terminals.
On these three terminals, you have to connect R, Y, and B, the three-phase power supplies here.
After that, here you will get an NO-NC contact.
Here, on the common terminal, you will have to connect the phase supply.
And through this NO-NC contact, the power supply will go to your contactor, through which you will start the contactor.
So, if the power supply does not go from here, suppose the power supply is disconnected here, then in this condition, this contactor will stop.
So, the same thing is done here.
As soon as there is a problem in the power supply, the power supply that was going from here to here, will stop the power supply here,
because of which the power supply will not go to the contactor from here, because of which the contactor will stop directly.
You must have understood this much.
Let's move on.
Now, in our drawing here, you will see that our power wiring, we have read this power wiring.
We have read it in a very simple way.
As you can see, I have told you about the single-phase preventer here, that you have to give a three-phase feedback here.
So, you will see that the three-phase power supply has been given to this preventer from this place.
After this, it is written here to control.
That is, to control, you will have to use these three wires.
One of the three wires will be common here.
The second will be NO.
The third will be NC here.
Now, for which wire has been used here, you will have to see in the control wiring.
How will we see?
Let's understand.
See, our contactor here.
The entire control circuit has been made to turn this contactor on and off.
Now, in this control circuit, you will see, first of all, a phase supply is coming here.
This phase supply is simply connected to a fuse.
You will see that a fuse symbol has been made here.
After the fuse, there is a toggle switch here.
The power supply will flow forward only after starting the toggle switch.
And after this, there is a single-phase preventer's NC contact here.
SPP is written.
You will see that SPP is also written here.
That is, the single-phase preventer here.
The three wires of this preventer have been used here.
Two of these three wires have been used.
Like, one wire has gone from here to this place.
And the second wire is connected here to this place.
The symbol made here is directly its symbol.
That is, the control terminal here has been shown directly here.
And here they have used the NC contact.
Now, the power supply from this NC contact is going to the stop-push button.
You will know the stop-push button.
Still, I will show you here quickly.
You will see that this button here, we call it the stop-push button.
So, this has got the power supply.
You will also get to see the start-push button ahead.
So, I will show you the picture first.
The picture of the start-push button is like this.
The picture of the stop-push button is like this.
If you look at this, anode is written here.
NC is written here.
Okay, you have understood this much.
Now, we will see the drawing here.
The power supply is connected to the stop-push button with the help of an auto-manual device.
Now, what is this?
See, the motor here.
Some conditions have been given to start these two motors.
Which motor do we have to start?
If we want our second motor to start with the help of the start-push button,
then we will have to select manual for this.
But if we want our second motor to start with the help of this timer,
then we will have to select auto for this condition.
Now, what is auto-manual?
I will show you.
You get a switch like this here.
This switch is called the auto-manual selector switch.
In the auto-manual selector switch,
you will get to see the A1 terminal, A1 terminal, and A2 terminal here.
You have to bring the phase supply to the A1 terminal,
which we call the power supply to the common terminal.
Power supply will come out of the A1 terminal only when you select this selector switch to A1.
And after this, power supply will come out of the A2 terminal only when you select the selector switch to A2.
If you select this switch to A2, power supply will come out of the A1 terminal only.
And if you select this switch to A1, power supply will come out of the A2 terminal only.
You have understood this much.
Now, friends, we also have a timer here.
As I told you, the timer is also installed.
The timer looks like this.
In this, you get A1 and A2 terminals to operate the timer.
After this, you get a terminal of 15, 16, and 18 here,
which is the common NCNO.
Or you can use a terminal of 25, 16, and 28.
Here, a timer is also installed.
I will show you the symbol of that timer here.
This timer is installed here.
You can set the time from 0 to 60 seconds in that timer.
It depends on how long we have to start this motor.
The phase supply is given here on the common terminal of the auto-manual selector switch.
If we select this switch on auto, power supply will flow from here.
And if we select on manual, power supply will flow from this side.
Now, let's understand how power will flow and how the motor will start.
First of all, let's understand what will happen if we select on manual here.
In this condition, the phase supply will come from here.
It will come from the stop button and then from here.
Then, power supply will come from here to this place.
Now, power supply is going to two places here and here.
Now, if we select this selector switch here.
A selector switch is given here.
The selector switch is the second one.
The first selector switch is installed here.
And the second selector switch is installed here.
So, if we select the second selector switch here on the first motor.
What will happen if we select on the first motor?
The phase supply will flow from here to start the first motor by pressing this start push button.
And as soon as the motor starts, its anode contact.
Whose anode contact is this?
The anode contact of this contactor is installed here.
As I show you here.
If you see above this contactor, anode is written here.
So, this anode contact here.
This contact and this contact.
This contact is used to keep the contactor running.
Means to hold.
So, what you have to do here.
So, what happened here is that this anode contact will close.
Means it will hold.
Because of which our motor will start.
Now, if you want to start the second motor.
So, if you select this selector switch here on two.
What will happen if you select on two?
We can start it by pressing this button.
If we select it here, then by pressing this button.
Our motor will not start.
Means only by selecting it here.
The second motor will start.
And by selecting this selector switch here.
By selecting the one number position.
This start push button.
Only the first motor will start.
Means here is the selector switch.
By this we can select which motor we want to start.
We want to start the first motor.
We want to start the second motor.
We can start it by selecting it here.
Now, if you want to start the first motor from the motor here.
But the second motor automatically starts after some time.
So, for this you have to select this selector switch on auto.
What will happen if you select on auto?
The power supply will go from here.
Near this start push button.
As soon as you press it, the power supply will go from here.
Okay, there is another selector switch here.
You will see that SS1 is written here.
And here is also SS1.
Means, behind this selector switch.
There will be more NONC contacts.
The use of those NONC contacts is done here.
You will see that the contact is open here.
Means, NO contact is used.
This means that when you select this selector switch on auto.
So, it will also automatically close here.
And what will happen by closing?
The power supply will go from here.
If you press the start push button here.
The power supply will flow from here.
It will start the first motor directly.
And as soon as the motor starts, it will close.
Because of which the power supply will be maintained from here.
And even after releasing it, if you release it from here.
So, the power supply will flow from here.
The motor will start.
Now, by looping a wire from this place.
The power supply is given to the timer.
Means, the timer will also start its counting.
And as soon as the timer's counting is complete.
The power supply which was coming from here at this point.
The power supply which is coming on the NO contact of the timer.
It will close here.
Because of which the power supply will go from here.
This is already closed.
When we selected it on auto.
So, it will stay closed here.
So, the power supply will flow from here.
And will start the second motor.
Means, after the time of the timer.
The second motor will automatically start.
Now, see here.
How both the motors are started.
You have two selector switches here.
One is this one.
The other one is this one.
If you select the first selector switch on auto.
So, by pressing this start button.
You will start the first motor.
And the second motor will automatically start.
According to the time.
After this.
If you select this selector switch on manual.
Then after doing it on manual.
You will get another selector switch here.
You have to select this as well.
For example.
If you select this on manual.
And if you select this on 1.
So, in this condition.
By pressing this start button.
We can start the motor 1.
If we select this selector switch on 2.
So, in this condition.
The power supply will come till here.
No power supply will flow here.
In this condition.
By pressing this start button.
We can directly start the second motor here.
The second motor will start running.
Now, after this.
If we want here.
That after the first motor.
Both the motors will run.
So, for this.
We have to select this on auto.
Okay.
So, you understood this easily.
Now, friends.
This drawing.
This drawing was very basic.
Now, if you want to learn.
That ACB breaker.
BCB breaker.
The drawings of big panels.
How to read it.
So, for that.
I have made a video course for you.
How to read electrical panel diagram.
This course.
About this course.
This course.
If you join this course.
So, here.
Okay.