Meadowlark Log Home Power Wash & Prep For Stain- Single Level With Garage In Idaho

Architecture and life
13 followers
#homedecor #workspace #design #architecture
Elvie and his crew power wash and prep the exterior of this large Meadowlark Log Homes single level with attached log garage in preparation for applying the exterior stain.
In the next video, Elvie and the crew apply three coats of plant based exterior Timber Pro stain. 
If you would like the exterior of your home cleaned and stained, or to order a log home or log cabin, please call or visit Meadowlark’s website:
https://meadowlarkloghomes.com
Phone:
(800) 850-8554
(406) 293-8707
Hi everyone, I'm LB from Meadowlark Log Homes. We're at this custom log home, this Meadowlark
Log Home in Idaho. There comes a breeze stirring up some dust. We are here to put the stain on the
outside of this house. One year ago, the Meadowlark Log Homes crew built this home in Libby, Montana
at our facility, dismantled it, and then put it back together here at this beautiful site.
A custom log house with attached garage, and we are here to put the stain on. And the first job
is to put the clean and bright, let me see if I can find it, right here is the clean and bright
mixed with water onto the logs. That product there is an all-natural cleaner mixed with water
and pumped out into the pressure washer. We pump it out of there into this pump.
The pump takes the mixture from there to the pressure washer. Don't fall in that trench,
JJ. So, Dennis is applying the soap to the logs. We use a pinhole tip on that pressure washer.
Oh, let me get out of there. It's kind of a nasty vapor.
With the wind, it's kind of nasty to inhale that stuff. So, the pressure washer pumps it through
that. We get the entire house soaked up first. Let me shut this so the soap water doesn't go
inside the house. It's got a large open deck, and we've already applied the soap to this deck,
to these logs. You can't see the soap. It's dried already, but it's doing its work.
It's just a strong all-natural cleaner, a wood cleaner, so that when we pressure wash,
we can do a better job of cleaning the logs. This is a nice covered deck here,
a tall sunburst log porch here, and a view out there where the elk come out in the meadows.
Idaho is beautiful. So, the house is one year old. We like that because the logs have dried
and seasoned, and now the stain will soak in real well. So, first step is now complete,
as of this wall right here, and we're going to just take clear water now and wash it off.
The nice thing about that small tip, it allows us to put the soap in the very peak of the house.
We can reach the very top of each high point with that soap. We need to let that soapy water
sit for at least 30 minutes. That activates the cleaning action, and then we can start
pressure washing, but it's been almost an hour since we started the front with the soap. So,
as soon as he's done with this part, we'll switch the pump to draw out of that big water tank,
and here's Cleve. I got him. I got him. Oh, yeah. He's in the video. Oh, no. This is our friend
Cleve. Guess what? Him and his wife. What's your wife's name again? Merveille. Merveille. It's
a different name. I keep calling her the wrong name. Merveille. Cleve and Merveille own this
house. So, while I got you, we just got here. I met him before. What's your experience been so far?
We'll interview you later, but for right now, briefly, metal lark homes, if you're thinking
of doing a log home, you cannot do better than metal lark homes. This house, they stacked in
eight days, and they had the roof on and went back to Montana a total of 29 days. We were blown
away. Did you guys do the floor system? No. My contractor did the subfloor, and then I did the
deck, and off we went. We did the logs. Did we do the framing? Did you guys do your own framing
inside? I did my own framing inside. Okay. Yep. Yep. So, well, awesome. So, we'll get you guys
a little later. I'm going to talk to Dennis right there and let him know he's actually done. He's
going over it twice, which is no problem. I have to do the outside of these railings yet, and then we're done.
Hey, Dennis. I got this side. Only thing left to do is outside the railings. Oh, okay. All the way
over to the covered area. That's it. So, let's watch him put some soap on the outside of the railings.
You can go kind of fast there because it's, yeah. Let's do a different tip on, right,
different tip. Dennis is going to put a different tip on this pressure washer. I believe that's a
15 degree. Now, it'll spray a broader pattern to the railing. Perfect. That's good. Get the
Well, that stuff is kind of nasty, even though it won't hurt your roses.
It won't even kill your grass. So, the cleaner doesn't kill the grass or the roses or hurt the
animals, and the timber pro stain doesn't either. What do you think about that, Dennis?
It's good. It's just that vapor. Yeah, I should still sit and breathe it, yeah. I should have put a
paper mask on. Yeah, me too. Okay, next step. Pressure washer, clear water out of that tanker truck,
and wash this thing off.
Dennis and I got our morning coffee right now. The kids are still sleeping. Teenagers,
we'll let them sleep in a little bit, right? Yep. So, Dennis is going to get up on that genie
and do a little sanding on the edges of those purlins that protrude, and I'm going to power
wash this area here. We're still pressure washing day two. It's a big house. Let's get with it,
Dennis. Let's go. It's go time. I'm going to go start right here in this corner to power wash that,
and then we're going to have to start masking the windows and the metal down below,
and get that mask for staining. So, we're almost done washing. So, we'll go and do that.
Wash the whole thing down. You'll see the soap come out of the walls.
the power washing done. The kids are starting to help put the masking on, like right here. Victoria
is putting this roll masking on all the flashing down below. You tape it on, and then it falls
down. It's got this little roll like this with sticky tape on the one end or side of it,
and you roll it, and it covers that flashing. It can be frustrating at times. Let's see what
Jana and JJ are doing. We're starting to mask the doors, the windows, and get everything covered up
nice for the stain. So, the idea is do a good enough job so nothing leaks through,
and there's a minimal of window cleaning needed afterwards.
But the nice thing about the Timber Pro stain, it does come off the windows fairly easily with the
glass cleaner, so it's not impossible. The house will require a deep window clean afterwards
so the kids got that done on the flashing there. We use a paddle that sits against that
to protect the spray from coming onto the shingles. Same with the roof. We use a paddle
prevents spray from going up over the top to hit the shingles.
We're ready to start staining pretty quick, but now it's too hot.
We've got the power washing done, got the masking done, and here we begin to put the stain on. I'll
start with the shady side where it's not as warm. We'll put the first coat on with a brush. We
spray it on and brush behind it, so it gets three coats of Timber Pro Pinewood color. First coat,
color, brush it in after spray. Second coat, brush in after spray. Third coat, color, brush in after
clear with no color in it. So here we go. Let's get started spraying.
