Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori. Find you when i will be live https://bit.ly/33x7Oyf
Affiliate links for tools used. If you purchase i will get a few pennies for the purchase. About enough to buy a stick of gum :) It will not change the amount you made.
[Music]
welcome to my Channel today we're going
to be doing a 21 in bubble wreath look
at this beautiful mesh isn't this
beautiful it's all different colors so
it could be spring to me it kind of
looks a little bit like a mermaid it's
an ombre
mesh and I thought this would be so cute
to do with
a bubble proof
method so you've probably seen this done
with 10in mesh but you can also do it
with 21
in so we're going to be using a Dollar
Tree
frame and our mesh you're also going to
need some pipe cleaners and we're going
to cut these in half so if you prefer
zip ties you can do that but I think it
is a little bit faster if you do it with
the pipe cleaners and
definitely let
expensive so I'll just take some pipe
cleaners
out and I'm going to cut these in
half so this wreath
frame is a 14inch wreath frame it has
six sections so you can do like five in
each
section you could also do six in each
section
okay so what I'm going to do is just go
ahead and load some of my pipe cleaners
on I'm going to go
around the two middle
rows so as long as your poops are not
larger than 10 in you can actually put
six in each
section you can also put five so good
one
works if you get to the end and you only
have five it's not going to be likely
that you're going to be able to see that
but generally what I do is I'll start
out with six in the first one and then
I'll switch to five as I go around
because it is going to start
to build up as you get so as you get
into the next section it kind of fills
in so I'm going to gather the end of my
mesh okay just like that and I have my
mesh on my mesh roller it makes it
easier for me to kind of pull
it I am going to take a zip tie and tie
this down right on this
crossbar now you only want to use
one just
because if you use to you're not going
to get a
good you won't get tightness on your
your zip top so just one
crossbar
okay then I'll just trim off the
excess
okay all right so when we come back
around and finish this will be
hidden okay so you can use
your mat if you want your little
measuring
mat generally what I do is I'll do the
first one so I could measure out the
first one to 10
in now I'm just going to tie it
down I'm going to poof it out and then
I'll just measure the second one against
the first one so then I don't have to
keep going back to my
mat and I can keep going
okay and what's going to happen is
you're going to push them and they're
going
to kind of just be right next to each
other like
this okay so about like
that I usually just do one section at a
time so I'll do one section then I'll
put my pipe cleaner in the next section
and so on and so
forth
okay okay push it
over and I'm going to do this all the
way around but we're going to go through
this first section
together if you have trouble time
the half pipe cleaners you can use a
full I just like to use half because it
uses a lot
less but you have to do what works for
you so see this is four in one section
that's already starting to fill in
nicely
okay so like I said five in a section
works great so if you worried about
running out of mesh just put
five or you could do like me and start
with six and just kind of decrease as it
builds
up okay I'll spread it out so one of the
most important things is to spread it
out so you get that nice kind of Fanning
with the mesh you see how pretty that is
okay so this will be our sixth one in
here I'll probably do six in the next
one and then I'll probably start going
down to
five just become just because it gets so
full that it can be difficult to put
them
in so I will start decreasing when it
gets Fuller so you see how this one's
already starting to encroach on this
next section
so I only usually do one or two with six
and then I decrease it okay so I just
take
my little pipe cleaners and I'll make
the next section you can go ahead and do
all of them if you want I just like to
do it this way but you can do it either
way you want there's no rules
I do tie them pretty
tight just so they're not going to move
around a
lot okay so I'm just going to keep doing
this all the way around and then I'll
show you what it looks like at the end
[Music]
okay so when I get down to the very last
one I
will pull this up and cut it now you can
either just go right underneath or you
can make one more poof with it really
just depends on what you want to do but
I will take a zip tie
now we'll go
around okay just going to kind of slip
that
underneath so the last one I basically
just tie down with a zip
tie
okay
now we have it all stretched out look
how cute that is so there is plenty
enough to do six in each
section you just kind of want to make
sure they're all spread out but isn't
that so pretty I just think it's so
pretty so let's look at what it looks
like there we go so I really like to do
this with the 21 in because now this
mesh is really thin you can really
really see through it so you can see how
thin it is but when you put it on here
and you push them together then it
really
doesn't show through anymore and I like
with the 21 in you get a lot more of the
bubbles the little curls in there and
it's just super pretty so a sign a bow
so I pulled out a few options I thought
would work with these
colors so it's kind of Pinks and greens
and blues so it's an ombre and it's
super light so it's kind of hard to tell
until you put some colors next to it and
then it starts to bring out some so I
liked this
one this
one and this one I think I'm going to go
with this one because I kind of feel
like it matches the mesh the best so I
want to use this
sign this is a 10-in sign you could use
an 8 in sign if you wanted to see all of
the poofs but I think I'm going to do a
10 in just cuz I really like that
size we're going to make a bow but let's
get this sign in
first
okay so I'm just going to punch a hole
in the top and the bottom with my metal
hole
punch this is not going to come off if
you use a metal hole punch and some wire
so I just use 20 six gauge wire about 20
in I always kept more than I need but
I'd rather have too
much so I just put it right through that
hole and then I match up the ends to
kind of double it up
and I'll twist it right at the
side okay I like to use the silver
because it hides very
easily so I can't really tell where I
attached
it okay there we
go Twist
Again all right I love these because
they're they're just easy to make they
only use one mesh they're really
pretty
okay and you can use a lot less ribbon
because you don't need to put ribbon
ties in it just a bow all right so we're
going to load it onto our weaving needle
like this and then just go right down
through the
mesh you can see it's super easy just to
pull it right out and then I'll tie it
around the
frame let's tie it on the inner frame
here
so all I do is just kind of twist it
around multiple times and then trim it
off I see you can see even the back
looks nice and
neat and that's because we put our pipe
cleaners going up kind of like ties
so again same
thing it is a needle it's just plastic
it's just a plastic they're called
weaving
needles and they make it super easy to
put signs
on it works on Grape vins as well as the
pineer The
Evergreens okay there we go
so once you put your sign on you really
just want it to float not push down the
mesh so mine's just kind of floating on
the
surface so let's make a
bow so we picked the one that has the
mint green and the pink in it so I have
some really pretty mint green
ribbon look at that beautiful
color I have some pink I have this
really cute one that has all different
colors in it it also has the mint and
the pink I have another stripe that has
mint and I have some bright pink so
we'll kind of do probably with these
four here so let's start
with the pink in the
back so let's do like a 12in
tail we're going to doveet tail so just
pick it up cut towards that wired
Edge Okay so so 12 in just going to put
it down sideways in the bow maker and
we're going to twist
it on the side we're going to make the
loop all
right okay so let's go 6
in 6
[Music]
in okay so once I get that first one
done generally so I you can even use
your finger to hold see where the 6 in
is I usually just
measure to that last one okay on the
last one you don't need to twist you
just pull it out and trim it
off and any bow maker all the bow makers
work essentially the
same so it's not going to matter which
bow maker you choose all right
let's let's let's put yeah let's put
this
one all
right so we did two Loops of the 6 in in
the pink we're going to
do two Loops of this as
well okay so this will be a four ribbon
[Music]
bow oh that's so
pretty okay all right so we do two same
way trim that off
all right then we're going to put in
this really
pretty mint green that we
have
okay so 12
in okay this time we're going to go to
about 5 and 1 12 inches so just a little
bit short of the one below it that way
we can kind of see the ribbons a little
better so about 5 and 1 half in and what
I can do is pull these two up to make
sure they're the
same and then I can just measure off the
one I've already
done
okay there we
go
right right so let's stub tail this one
okay just like
that see how pretty that is now you
don't have to move your ribbons around
like I'm doing if you don't want to you
can
wait I think I'm going to add one more
ribbon so this is going to be a
five ribbon
bow okay
I really like the stripes so we're going
to do one more
stripe
okay there we go so two
again all
right and then we're going to end off
with the pink but we're only going to do
one Loop of the pink
okay all
right so it's going to be the five and 1
half as
well
okay there we
go just kind of want to make sure it
matches
okay okay so we'll take our zip tie we
going to run it under one
side and then get it tight enough to get
it out but not all the way and then you
just pull it out with the bow maker pull
it out with the zip tie there's our
channel so we want to lightly hold it
slide this around and then just make
sure it stays in that channel and that's
what's going to make sure your Loops are
going to stay the same so before you
tighten it completely
get your pipe cleaner zip tie wire
whatever you use back
there tighten it as tight as you
can and
then we're going to pull out our ribbons
here okay and that pink one will stay in
the
center all right
there we go look how pretty that
is okay so I'll hold it with what's in
the back and I'll start to fluff it out
to fluff it out I like to twist it back
and forth so that I can get any pieces
that are stuck down in that zip tie
loosened so I can break it from that
little middle
part okay and then I just fluff it with
my hand
so just kind of stick your hand in there
and fluff it
out you do want to do one side and then
the other if you try to go back and
forth it's really easy to get lost and
then you end up with a problem
so just do one side then the other
there see how pretty that is look at
that okay so now I can cut off this zip
tie in the back
okay and I'm going to
get my Tails okay I'm going to run my
hands under
them just to get them to kind of curl
towards the
end so sometimes I curl the ends and
sometimes I
just let it kind of curl under I like
that as well
okay now we can tie our bow on we can
tie it right down at the
bottom okay so I'll just kind
of put it
around in between some of these and put
it down on the
frame let me get it in place here all
right so if you see I've got it in the
middle of those two pieces
and then I'll tie it
on and just tuck that up into the wreath
there we
go all right let's take a look at
it oh let's look at one more thing
before we do that uh one thing you can
do too if you want to add a little bit
more you can get the
little glittered foam balls
and you can kind of glue them in
between you can even you know pinch your
pieces together and make a little design
with them like
this but it's really cute if you just
put some of these around
just gives it a little bit of
color but you just glue them on and they
will stay they'll glue to it you do want
to use lower temperature glue
though just
because you don't want to uh melt the
mesh okay let's take a look at it okay
there we
go see how pretty that
is look how pretty that that is
especially with that
sign oh that's so pretty and there's our
bow at the
bottom that's so
pretty I love how it does the little
swirlies all right be sure to like And
subscribe and hit the Bell icon to know
when we're going live or when we're
uploading new content I hope y'all
enjoyed this this is a simple project
and pretty
quick and definitely budget friendly
all right y'all have a great one thanks
for watching bye y'all
[Music]