Setting Timing On The 86 GMC 400 Small Block

My Brother Donnie
258 followers
Jan 13, 2025
all right folks we're back
we're working on this truck don't look
great wish it ran
great say hey donny
hey y'all the uh i see on my
analytics that 68 of y'all analytics
are not subscribed that is kind of new
words subscribe to the channel if you
haven't already
subscribe to the channel people that now
is that too much to ask them
no i wouldn't think so why are we
filming this stuff donny
well we don't have to eventually there's
going to be a monetary gain i hope
subscribe to the channel people give us
a thumbs up give us a thumbs up
okay so we're working on this truck now
let me review for a second okay okay
in case people are tuning in new donnie
we're picking up new people all the time
yeah
we are and i appreciate that very much
yes
so this is my arcade hauling truck it's
a 1986 gmc sierra classic it's got a
lift gate on it i love the thing
so i i have two trucks i have also have
an 83
silverado that i drive i like i like the
old cars like i like the old uh
arcade games and stuff so anyway the
uh i'm tr my other one needs the engine
rebuilt really it's starting to
be pretty damn bad but this one also had
a lot of problems so i
took this one to a guy had him rebuild
the engine it's
it's got a 400 small block in it which
is not the original engine originally it
had like a 305 we think
but years ago it had this 400 swapped
into it so we took this 400 out had it
rebuilt put it back in
god never could get it running right so
then we took it from him and took it to
another mechanic that mechanic could not
get it run
right it does run but it ain't right so
now
donny has to do it so we're figuring out
the deal
so on the on the last video or a couple
videos ago
donnie didn't like the aluminum intake
that somebody had put on it so we put a
nice
old-school cast iron intake on it there
look how nice it looks
the engine's been rebuilt it's got a
brand new carburetor on it all of that
so in today's video
we got we it's up and running but it
just it ain't it doesn't idle right it
just ain't right so today's video
we are going to set the timing
we hope we hope does your gun donny you
said that's the nicest gun ever does it
do rpms
no it does not do rpm but it does do
dwell advance uh vacuum advance
does vacuum advance or dwell advanced
well event
okay so i've been looking it up online
and the people are telling me
now we donnie is a mechanic but
some of this stuff it's different
everybody's got a different opinion on
it
so the people are telling me that the
way you want to set timing on this thing
is you want it to be about 32
before top dead center when it's up at
rpm
so whenever it's 2500 3000 rpms
you want it to get up to 32.
so that's what we're going to do we're
going to uh
so so the initial timing
you set to basically so you got to set
with the vacuum advance off
but you set the initial timing to what
did they say i made a i made a cheat
sheet here people
this right here all of this we are also
going to adjust the carburetor
but we're going to do that on a
completely different video y'all gonna
have to wait on that
so there from what my notes online 32
before top dead center at the higher
rpms
we want the idle at about 800 and that's
going to put our initial timing at
somewhere between 4 degrees and 12
degrees before top dead center
we want the vacuum advanced disconnected
and the hole plugged
whenever we're checking that at initial
at idle
okay and then we got to talk about
the vacuum too donny we want to do that
ahead of time or we want to uh
do the timing first well we're probably
going to have to do it ahead of time
right yeah so we can do it at rpm okay
so here's the deal with the timing i'm
going to read you
the vacuum the vacuum i'm sorry i'm
going to read you
all about the vacuum as we understand it
are you ready for story time donnie
story time in the barn we used to go to
an auction and the guy would sell grab
bags and so he'd always say
it's grab bag time and auction barn
so while i was perusing the internet
late last night
i found this guy who said he used to
work for gm
now that doesn't mean you can just trust
anything anybody says but i like the way
this guy was talking
so i'm gonna go ahead and we're gonna
follow his advice
you cool with that daddy hell might as
well
donny's cool with it so here's here's
what the guy said
so people are on there asking about the
difference between
ported vacuum and manifold
vacuum okay because nobody knows where
the hell to hook the distributor up
to the vacuum lines on the carburetor so
the best i can tell there are four
vacuum lines
four vacuum ports there's one in the
back
that hooks up to the power brakes we got
that one
so that one's right yep there's this one
in the front that's right in the middle
that's usually hooked up to the
pcv valve positive crank case
ventilation
so we got that right and then here's the
big stickler
the distributor now wait what did you
say about the transmission it's supposed
to have one too and on some cars
i don't know this might be a
electronic overdrive it might not have
it but all the
if it is a turbo 300 or a turbo 400
it will have a vacuum on the right hand
side
of the transmission all the way in the
back and it comes up and goes
directly into the intake okay we can we
do not see that vacuum line so we
believe this is not that transmission
hopefully
hopefully so if it doesn't have that it
wouldn't shift right basically right
yes in the overdrive yes well no it
changes all
it's all shift points okay so you may
have that situation
or we and we may have that situation we
drove it but what we're gonna mess with
first
is the dam distributor okay there are
two more
ports on this carburetor and so these
edelbrocks a lot of people put them on
all kinds of all kinds of
engines but this is also true of pretty
much any carburetor
so you see one port here has the
distributor hooked up to it and one port
here
is capped off this one port see how it's
lower than the other one
so this one is down lower oh if i find
my finger
this one's down lower it's below the
throttle plates which means that right
now it's connected to the manifold
so it's part of that there's a line that
goes down it's part of whatever the
vacuum is in the manifold they call that
manifold vacuum
this one is up above the throttle plates
they call that ported
um vacuum vacuum so i found this so
everybody's saying which one am i
supposed to hook my hei
that's an heid distributor right which
one am i supposed to put my
hei distributor up to and i found this
gentleman who used to work
for gm and he's going to explain it all
are you ready
story time is here now to the widely
misunderstood manifold versus ported
vacuum aberration
after 30 40 years of controlling vacuum
advance with full manifold vacuum
along came emissions requirements donna
you don't like emissions
years mission requirements years before
catalytic converter technology
had been developed and all manner of
crude band-aid systems were developed to
try and reduce hydrocarbons and oxides
of nitrogen in the exhaust stream
one of these band-aids was ported spark
so they're talking about at idle now so
at idle
that plate is pretty much closed but
whenever you get on it and you're
driving
the plate opens which means that the
manifold and that vacuum are the same
because there's
the plate opens and they're in the same
cavity then
okay one of these band-aids was ported
spark which moved the vacuum pickup
orifice in the carburetor venturi
from below the throttle plate where it
was exposed to full manifold vacuum at
idle
to above the throttle plate where it saw
no manifold vacuum at
all at idle this meant the vacuum
advance was inoperative at idle
which the spark timing from its
optimum value
and these applications also had very low
initial static timing usually four
degrees or less
and some actually were set at two
degrees after top dead center
this was done in order to increase
exhaust
gas temperature because it lit the fire
later
to improve the effectiveness of the
after burning of hydrocarbons by the air
injected into the exhaust manifolds by
the air system
as a result these engines ran like
and an enormous amount of wasted heat
energy was transferred through the
exhaust port walls into the coolant
causing them to run hot at idle cylinder
pressure fell off engine temperatures
went up combustion efficiency went down
the drain and fuel economy went down
with it
so what he's saying is exactly what my
454 is doing
i know i think that's what they're all
doing i think we're going to fix every
car we've got
he's saying that they do it like that
because of emissions crap but what it's
doing is
it's it's changing the so at idle it's
changing when the damn
gas is detonated because it doesn't
allow the distributor
to advance at idle at all which means
you're sitting real low
the dams the and the reason they did
that was so that it ignited later so
that
more of it didn't get in the tailpipe
and all this stuff as soon as you get on
it
it's smoother what did i say last week
when we were messing with this one
it felt smooth as hell when i was in it
but if if you've got to get down to idle
it idles like hell
and so person after person after person
is saying where you got your vacuum
where you got your vacuum where you got
your vacuum
they're saying if you've got the vacuum
on the ported which we do
that it'll run like hell and if you put
it down on the manifold one it'll run a
hell of a lot better
so that's what we're going to do but
first we've got to uh
we've got to do the timing but i guess
we'll go ahead and move it over so that
we can uh
we can uh test it so i'm going to move
the damn hose over if it's long enough
hopefully
and uh it's looking suspect but
we'll move it over to the other one and
then we'll cap off that one and then
we're going to try to get this thing up
and running now how much did you say the
timing was that last week
when i started it was at 60 000. it was
it
it was at 60 before top dead center and
it's supposed to be at 32 before tops
dead center whenever you're fully in it
so we're getting up to 60 so that's
timing wasn't right but then you
adjusted it down
yeah i think i got it what's that gun
set up
i think i've got about 15. but that's
probably
uh that idle yes we're going to do it at
top speed so basically you set the you
set the
the initial timing by twisting the
distributor and so maybe you got it 10
before
top dead center okay and then
the vacuum pulls it farther so once you
hook the vacuum back up since we're
putting it on manifold vacuum it'll
start pulling it immediately it should
be once you get up to
your kind of your cruising speed if
you're going 65 70 miles an hour
which would probably be 3 3500 rpm
something like that
once you get up to that speed you want
the dam you want it to be
firing at about 32 before top dead
center they said that's where 400s are
happy
this one's been overboard a little bit
though it's 40 over
i don't know if that changes it it won't
change it much
you don't think so so we're going to try
to set the damn thing at 32 before top
dead center whenever
it's at high rpm we're also going to
switch the vacuum line to
manifold vacuum instead of porta vacuum
to see if that makes the idle better
after we do all that we're going to mess
with the carburetor a little bit too but
we'll do that in a different video so
we'll switch that hose and then i'll get
it and start it and we'll see what we
can set it up
all right
right there about
so with the vacuum one we're at about 21
at idle
and when we rev it up uh we were up to
35
which is a little bit higher than we
wanted
but it's idling to help do you think
it's battling better it's idling now you
ain't having to down
in there i think it's idling a hell of a
lot better but we've got other issues i
don't think the carburetor is adjusted
right
and we've got crazy freaking um
it's smoke but it's the smoke has like a
rich smell in it i think it's burning
old gas
look how look how the damn fuel filter
looks actually it's cleaning up guys
yeah the fuel filter the gas was orange
we've diluted
it with some new fuel but i think we've
got i think we've got suspect fuel
and i think our uh i think our
carburetor needs adjusted
so that's our next thing but i think
we've got the timing better at least
so uh people down below leave your
comments let us know if you think that's
right that it should be uh it's more
about what it's at
at uh cruising speed you're looking for
about 32. we got it to 35.
i guess we could go down a little bit
more but
we're going to check this and see what
it does we'll run it out yeah
i kind of since we've got an island i
kind of want to get the damn carburetor
right so we're going to do it next and
if we uh
if we decide we need to mess with the
timing some more we will
all right donnie so tell them what to do
subscribe this channel if you haven't
already
give us a thumbs up and film it and uh
we'll catch you on the next
we'll catch you on the next one leave
your comments below what do you think
about timing
on a 400 that's board 40 over
we'll uh but we'll mess with the we'll
mess with the carburetors so get ready
for that video
