Figuring Out What's Eating Starters on our 400 SBC 1986 GMC Sierra Pickup

My Brother Donnie
258 followers
1 Video View·Jan 13, 2025
all right we're back
donny's messing with something we're
gonna pull this starter
oh god we're doing the starter video we
gotta pull the start
we gotta see what's going on i wanna see
the t i gotta take starter apart i want
to see how it all goes together
so we got to pull this starter so we're
out there's a 400
on this truck we're having a problem
where it's eating starters
and there's a piece of 2x4 down here
yeah you got to show them man you take
you're not taking the whole starter off
yes i am okay donny's going to take the
camera
he's going to show you the 2x4
underneath it
there's a 2x4 i don't know where my
fingers at there's two before
wedged in the starter against the
starter in the oil pan
to try to hold this thing and uh i think
a minute ago
we broke the end of it off trying to set
the timing you can
tell right there can you see that
see that right there that means it's
eating the flywheel off again
we have changed the flywheel twice in
this truck
and uh now the flywheel's eaten again
so we've got to figure out how to
get it to stop doing this all right
make sure to tell them up front me and
you didn't do a damn thing we didn't do
none of this world
i actually paid people to do this we're
trying to fix it
um but you see the flywheel there where
it's ate up
now i'm looking at the back of the oil
paint you set big scratch in the back of
the old pan that's what i'm looking at
but uh that flywheel the teeth are eight
let me get a good video of that
it's all the way around so it's
obviously the
starter is shimmed incorrectly and this
nose
is nowhere close to where it needs to be
there
the nose needs to be on back there so
we're going to get the starter off of
here and look at our teeth on our actual
starter
and see how it looks also but right
there there's a 2x4
holding the starter
and yes we have the brace on the back of
it if you can see it there
we've got that brace on there we've got
brand new boats in it
brand new starter like four or five
starters
and it looks like they've got about four
or five shims in it
which that probably don't need that many
i ain't never shimmed the chevrolet
starter in my life
[Music]
but we'll see ronnie in your arcade game
videos
isn't that the first thing you look at
the wiring
the wiring the power the power supply it
is that's where i start
what is that right there that's a burnt
all to hell
hot battery cable i mean
if you were working on a car and you had
a problem with a starter
and the boy has paid for a new starter
a new flywheel a new n2 alternator
a new distributor a new
everything wouldn't you tell them to buy
you a new battery cable
you'd think i don't know man maybe that
is a new battery cable when they screwed
it up
this look ronnie can you see that
yeah the studs wobble is that just the
stud or the whole thing
that's the stud but you know that stud's
got to have a compact back here
yeah that can't be good
i mean i'm no rocket scientist but that
can't be good
look at this
[Laughter]
i mean hell it it's you gotta start a
problem
this is the you checked i mean
put your fingers on the damn starter and
check some stuff
people people people and we're trying
i'm trying to be nice as i can
yep but i mean ronnie
would that pass on your arcade game no
how the hell can it pass on a truck
yeah you ain't gonna believe what i'm
gonna pull out here in a minute so if i
get this loose
well i know there's wood down there well
let me see them a pair of pliers or
something okay we'll be back people
all right folks on a 400 there is a
bracket i know you can't see all this
we're going to show you more here in a
minute but on a 400 there's a bracket
that bolts on the front of the starter
show them what the bracket's doing donny
you've got a problem with starter
moving i tell you i call you and tell
you look i've got a damn bracket coming
it's designed to hold this thing in
place
tighten it up get it on there get it on
there good
so they wedge a two by four in the
bottom
and they leave the damn bracket
loose that's i think i bet it's the
wrong starter whenever you get it out
you watch
it's gonna be the wrong thing i i can't
i i don't i don't know what to say here
i mean
i'm trying to be as nice as i can be
but okay
hey we'll be back here in a second okay
this will be hard to see i believe but
this bracket goes here
okay i just pulled the bracket off
bracket is loose look at the back of
that block right there
see where it's been beating the side of
the block trying to hold this starter
it's obvious it's moving everywhere
the paint is knocked off the block right
there
you can tell it that means the starter
is moving
the back of the bracket has got paint
all over it
right in there so you can tell it's
moving all over the place on us
so we've got to get it tightened up here
and get it
snugged up but i'm going to take the the
two main bolts out and pull this starter
down and look at it
and actually see what else has tore up
in here
i found plenty of stuff where i think i
can fix this starter
issue if we get it all tightened up and
get new wiring down here to it i think
we can
fix it
all right folks here's what we're
working with
again we did not do this this is a brand
new flywheel
but since the starters grinding
it's ate away the teeth a little bit but
it ain't
it looks like this is the worst spot oh
you know what donny
yeah hmm
it's not as bad as i thought it's about
so about a third of the depth of some of
the teeth
are eaten away and it's about half of
the tooth now why is it only half the
tooth it's because the damn thing ain't
lined up right
it's supposed to go all the way in
over the freaking uh flywheel
engage all the way and then start
turning
and you gotta measure all that crap
whenever you set it in there you know
so we're gonna do it the right way with
the right starter
we're gonna see if we can get away with
this flywheel even though it's worn a
little bit
because it's brand new but uh
we're gonna see if it's gonna still get
us there if not and there might be a
spot on the other side of the flywheel
that's even worse who knows
um but we'll uh
we'll see what happens we're gonna order
a new starter and all of that stuff
let's look at the actual starter
okay folks so we've we are done tearing
stuff apart
so here's the wires to the starter and
plus
remember the big the big line is all
screwed up
here's the wires to the starter it's all
black taped so i got to take us all
apart and see what we're looking at
and then
i don't know don i think too bad but
it's all exposed
and who knows what's going on in the
tape so we got to redo this
figure out what's going on i'll see if i
can buy a new harness or that part of a
harness or something
and then here's our starter
first of all the casing of the snout
broke
but that's better than the block
breaking
donnie's still
he's not satisfied with the wiring
yeah i think that's probably a problem
and remember the block's not grounded
either see the ground strap just hanging
over there
so the starter gets its ground from the
block
i mean i guess it has been grounded
through there's three wires it comes in
the two wires
okay all right one
one thing i don't like
right there yeah but you might have just
done that
[Laughter]
and this is taped together right there
you can tell it's two wires right there
those two wires where they got it rigged
together
oh my god people and it's again
right there i can feel it in there it's
again right there
you can see the bare wire there yeah i
got to get new wiring stuff
let's see what i can find all right so
we got that and then back on the starter
here
the uh so the mounting tab is broke
probably because of the 2x4 and the uh
i don't know if it's
this is not happy with the stud
this whole end is moving
all right this loop
don't beat itself against the block
and it's made in china
that's another problem
look now i ain't put a wrench on it
damn loose what do you think daddy
i think that starter is a piece of trash
starters junk i think the wiring is
trash it's junk
the block you said
all right we got a phone call kick this
off all right so i need new wiring
wiring's not right the ground is not
right
the battery cable is not right we think
it's the wrong starter
it wasn't shimmed right the bracket
wasn't put on right
and other than that we ought to be good
donny what do you think yeah
just no wire new starter
new bolts for the bracket that ought to
do it
all right so this week we're going to
get flywheel we're going to get an
intake now
on the other video we were talking about
how we needed an intake for it
yep okay so did we find an intake yep
okay how much is intake gonna cost this
man it's gonna break the bank
all right 15 15
i need to spend for another intake okay
for the original one
original intake nobody wants those i
want these
all right folks so that's the end of
this video we're gonna film another
video of us installing the starter we'll
film another video with some
reins of installing the uh the the
original style intake and uh we'll let
you know what we figure out but we gotta
i gotta order a bunch of stuff so uh
i guess we'll end it there so that's our
two main problems right now we found
some other stuff like the shock ain't
mounted right and
all right donnie so tell them what to do
subscribe to the channel if you haven't
already
give us a thumbs up that's the best
thing you can do for us give us a thumbs
up please give us a thumbs up
after you give us a thumbs up leave us a
comment down below
and we'll catch you on the next one
