This Monster saved me THOUSANDS over the Lumber Store Wood. 50 days to build, 30 minutes to watch Totally from memory without written plans.
🪵 This sawmill is 4 feet wide, 6 feet tall and 24 feet long It can handle up to a 30" diameter log and can make up to 20 foot long boards. It's highest cut off the deck is 26.75" Its lowest cut off the deck is 1"
I built into the head a tilt feature which allows the sawmill to cut lap siding sometimes called clap board (overlapping siding). This utilizes my wood better with much less waist. This is where one edge of a plank is thinner than the opposite edge allowing the planks to be uniformly overlapped for better fit and water run off. This is a strength and waterproofing feature used for siding and in wooden ship building.
It took me 50 build days over a 6 month period, and over 50 hours of video condensed into 25 minutes
I started building it June 1st and finished it December 6th
It snowed the day after I finished placing it in its working spot and the snow didn't stop until May of the next year.
I worked on it as often as I could throughout the summer in between events, speeches, making other videos, traveling, family matters, ranch work, gardening, fishing and hunting and any other shiny object that distracted me.
The engine is a 420cc (13hp) Predator, electric start with a series 40 centrifugal racing clutch
I put an extra Magneto-Coil and rectifier to double its charge amps capacity to recharge the electric start 12v battery. The extra coil doubles the output voltage to 3vdc and the add on rectifier/regulator moderates and combines the power from two magnitos. It's basically a trickle charger but it keeps the battery up to the top very nicely.
It has 2, 6 inch 18W Flood LED Work Lights for night work. It has an inductive hour meter built for lawn mowers It has a waterproof battery isolation and master disconnect switch Dual rulers built into the head for accurate measured cuts It is mounted on 8, 2,000lb tilting trailer tongue jacks as legs It weighs in at just over 1,200 lbs
The blade wheels are BK160H and the blade wheel belts are 50" "B" belts = B-47 and they were hell to get on. The drive wheel is a BK140 = 87" "B" BELT = B-84
The 1" stainless steel blade guides are made by Cooks Saw The blades are 1" wide and 164" long DuraSharp 7/8" offset tooth spacing
🎹 Music in this VIDEO was all from 🎼 ARTLIST.IO 🎶 Click Here: https://artlist.io/referral/e3ef9fc6-dc4c-4e82-96f9-a7139a0f567d This is a phenominal service with over 28,000 Copyright FREE songs in the library. It's a bit pricey for a beginner but if you can afford the yearly subscription, you'll love it SONGS Blue Beings = Tamuz Dekel The Wind - Instrumental - John Vincent Rectifier - RockNStock Where - Tobias Bergson Can't Hold Me Back - Notize Drive - SPEARFISHER Out of Flux - Chaos at the Spaceship Game Over - 2050 Warzone - Night Rider 87 Bastion - Evgeny Bardyuzha Away Again - Campagna
Follow me and subscribe on all of My Social Links: I post some of my YouTube stuff on some but post different things on others. YouTube.com/@CaptainWingnut Facebook.com/CaptWingnut Facebook.com/CougarRidgeRanch ganjingworld.com/s/pEngrr1BzX Instagram.com/CaptainWingnut Rumble = CougarRidgeRanch SnapChat = TheCaptWingnut Truth Social = @CaptWingnut X.com/BWardleCW
Oh, If you're interested, my IQ is 168
As Always: This is what "I do", it's up to you to ALWAYS use your own research & more importantly...common sense. You can try it applying your own common sense and logic, if you don't like it, change the channel like you would if you don't like the TV show you're watching. I welcome your comments & questions and I do my best to answer as many as I physically can If you decide to post a comment, be nice & post an educated, intelligent comment If YouTube doesn't, I may delete and mute/block any inappropriate, rude, mean, frivolous, unintelligent (stupid) or irrelevant posts or posters CHEERS, CaptainWingnut
Hello and welcome to my channel. I'm Captain Wingnut and thank you from the bottom of my heart
for watching. I built the sawmill you see behind me from scratch out of a ton of scrap stuff I just
had laying around. Oh, I had to buy a few things but it was all less than three thousand dollars.
As COVID hit the world and lumber prices went sky high, I calculated that if I built the sawmill
and bought a truckload of timber, I would only have to cut half of the wood and I would have
paid for the sawmill, my time, and the wood. Little did I know it was going to get worse.
In the end, I broke even after I had only cut 11 of my 44 logs that are 40 feet long into lumber.
I'd built a lot of things with the lumber. Some rough cut and some I finished through the planer.
It took me the entire summer and fall to build because I only had time to build in between
ranch work, traveling, speaking, engagements, fishing, hunting, oh yeah fishing and hunting,
hiking, gardening, fixing and repairing, everything else that breaks around here.
I filmed over 50 hours of video that I've condensed down into this short video.
I started it on June 1st and finished it on December 6th. I really thought I'd never get it
done. I put a ton of details about the sawmill in the description. I very much appreciate you
watching this and I ask you to subscribe to my channel. It really helps me a lot.
Oh, if you like the music in my videos, it took me a long time to find good music.
Look in the description for the links where I get my music.
All right, here I want to let you in on a big secret. People have a difficult time understanding
how my mind works and this project is a good example to show you. I didn't use any plans or
blueprints but I built this entire sawmill with what was in my head. When I would see a sawmill,
I took mental note of the features I liked and I used them in my mind to create my mental plans.
No sawmill that I saw had a lapsiding feature so I designed that into the head of my sawmill too.
I explain lapsiding in the description. So here's a little background about me that my family and
my friends know but most people don't. I'm often judged harshly because I'm different and I think
differently. I see the world differently through my mental glasses than most people. I'm actually
different in a way most people say they would like to be but alas there are very few of us
and I'm sure my idiosyncrasies would drive most of you crazy. What am I talking about?
I'm what psychologists classify as a high potential intellectual. I'm not bragging,
I'm just telling you what the numbers are. I have a very high IQ and I'll put that in the
description. I have what psychologists call advanced cognitive abilities like spatial
visual manipulation as well as spatial intellectual creativity which a lot of people
have but I also have a photographic memory which is not very common. I have mental spatial
visualization or visual spatial abilities which means I can look at a two-dimensional object
on paper take a mental picture of that and then I can turn that into a three-dimensional object
in my mind and then I can rotate it, spin it, move it around in my mind and look at it from all
angles. I can even take that mental object and change some of the dimensions and watch like
I'm watching a CAD program how all of the other parts change with it in real time. With this
ability I spent a year designing this sawmill behind me in my mind, altering it, virtually
operating it and changing it mentally into what I wanted. Yes I can operate it in my mind and see
how everything functions or didn't function with the other parts. When I was finally happy with my
results a year later I took the summer to build it and now I didn't have written plans it's all
in my head. All right let me take you on a fast forward journey and let you be a fly on the wall
and watch me build this wonderful beast from surplus junk laying around and totally from the
plans in my head.
So
today the arch is built and we're going to start building the head that's going to move the blade
the motor all all the exciting stuff all the moving stuff that makes sawdust so let's get with it.
So I started this project in June, June 1st and it has just taken forever this is one of the
longest projects I've ever done by myself and I do most everything by myself. I started
buying the stuff that I wasn't going to make for this a year previous and then I was going to start
this in about April. My father got ill and his illness and hospitalization and eventual death
put me three months behind. He was just really looking forward to this and he died just barely
barely before I started doing this. I mean we were really ready to start when he fell ill and
and that was the end of it. He had a really good life he was 91
got everything done that he wanted to do so I'm still doing this. I've got it all built painted
and today I'm going to install the motor and line the blades and then I'm going to build the guard
covers for the blades and it's going to be a wood cutting machine. So here we go!
So what'd you think? This bad boy is four feet wide six feet tall 24 feet long. It can cut a 30
inch diameter log and can make up to 20 foot long lumber. It's powered by a 13 horse electric start
motor with a series 40 centrifugal racing clutch. It snowed the day after I finished placing it
in its working spot and the snow didn't stop until May of next year. I'd gotten one cut out
of it before the snow buried it for the winter. Hey if you like my content again please subscribe
I really appreciate it and it helps me a lot. Thanks for watching and stay tuned for videos
of this big bad boy cutting big lumber.