Century Arms AP5-P Grey Team Edition HK MP5 Clone

Gun Z9
3 followers
10 Video Views·Jan 10, 2025
The AP5P Gray Team Edition.
Let's check it out.
When it comes to the HK MP5,
it is one of the most iconic submachine guns ever produced.
Used in a number of different movies,
but also really favored by the Navy SEALs
and a lot of elite teams all over the world.
And while these are produced by HK,
they bring a pretty hefty price tag.
But today we're gonna take a look
at the AP5P and this is imported by Century Arms.
And these are made in Turkey by MKE
on licensed HK machinery, technical plans, metallurgy.
This is as close as you're gonna get to an HK MP5.
And it's compatible with all the MP5 parts.
Now this is the Gray Team Edition,
which is a nonprofit that supports military veterans.
There's only gonna be 2000 made
and the proceeds will go to Gray Team.
And we wanna give a big thank you to Century Arms
for sending the AP5P for this review,
but also supporting our veterans.
Well, the Century Arms AP5,
this is the limited edition Gray Team version.
And one of the things about Gray Team
is it's a 501C nonprofit organization
and they support active duty US soldiers and military vets.
Their big mission though is to reduce
or eliminate PTSD related suicides.
And through that,
they do a lot of things with health and wellness.
They get guys together.
They go to a lot of different events.
They hold different fundraising events.
It's a great organization and it's really cool
that Century Arms has partnered up with those guys.
Does have Gray Team with a pyramid laser engraved
on the side of the receiver.
And it has the number out of 2000
that they're gonna produce.
And they're trying to raise $100,000 for Gray Team.
Honestly, these are a little bit more expensive
than their standard,
but with all the accessories they have that come with it,
it's definitely even a better value.
And of course this is based on the HK MP5 or 94,
which is a nine millimeter roller delay blowback action.
And roller delay, man,
it really makes a huge difference when firing it.
It makes it a lot softer,
especially compared to a straight blowback action,
which has a little bit more recoil
than your standard recoiling systems.
But this is actually produced by MKE.
Now back in the 1980s,
the Turkish military went with the MP5 from HK,
but one of their requirements
was that it had to be made in Turkey.
So HK went down, set up all their machinery.
They had all the technical data,
all the metallurgy and all the tooling.
And these originally were licensed HK MP5s.
After the contract was up,
MKE bought the factory and they have been producing these.
This is the closest you're gonna get to an actual HK MP5
without going and buying an MP5 or the SP5K.
And you're gonna get this for less than half the price.
Now, previously had some experience with the Zenith, ZP5K.
Zenith actually imported those from Turkey from MKE.
And I'll tell you guys, I've had that for a number of years.
It is a great MP5 clone.
And I almost hesitate to call it a clone.
But the HK MP5 has been around since 1966.
There are a lot of special forces
that use these for a number of years.
SEAL Team was one of the big ones,
but they've also been featured in a number of movies.
And of course, Die Hard was one of the big ones.
He actually took one of the MP5s
and used it against the terrorists.
And then, of course, in Matrix
and Keanu Reeves shooting double MP5s.
I mean, that was just beautiful.
Of course, first thing let's do is go ahead
and we'll drop our magazines,
empty, and we'll check the chamber.
And the gun is empty.
Now, with the charging handle in this little notch,
you slap it down.
That's called the HK slap.
I mean, it's just really cool to do.
And the magazines just seat really well.
These are MKE magazines.
You get three with the AP5.
You'll notice that I do have a sling attached to the back
and it does come with a sling, has the HK hooks to it.
And of course, we were shooting it
with the SB tactical brace.
It just makes it a lot nicer,
but this is very doable right around your neck.
And that's one of the things about the AP5 is the size,
especially the smaller size.
I mean, it makes it really handy and easy to use.
Now, this is fully HK compatible.
And obviously, if they're going strictly
with the same plans,
you can interchange the parts with these.
And of course, HK parts are typically more expensive
and Century does carry all the different replacement parts
if you do have any kind of issues.
Now, it has a stamped receiver,
which is typical for your HK.
And then we have a polymer lower,
very ergonomic little grip on it.
Safety right here, just bring it down for fire,
lift it up for safe.
Magazine release is a paddle design right here.
And guys, it just allows you to grab that magazine
and pull it right out.
And then when you're inserting your next magazine,
it goes right in.
There is a magazine release on the other side.
I typically don't use it.
It's a little bit of a reach to get to.
And then if you needed to, you can drop it this way,
but you still have the paddle mag release right here.
So you can take it out this way, but very thought out.
I mean, this is definitely a combat firearm.
Now the barrel is cold hammer forged.
It's 5.8 inches in length.
And of course you can get the little bit bigger version
and they do make a version that is just cut off right here.
And so it makes it a very compact package.
So it gives you a couple of different options.
This is my favorite model.
I love this size.
I love the ability to be able to put on any kind of
suppressor or whatever I want to.
So this just gives you a lot more options
and it's so tiny and easy to stow away.
Hand guard at the front, it does have a stop.
And on this short barrel, you definitely want to have that.
And of course they do make some different versions of this,
but this is what comes on.
I mean, it's a very well-made polymer, even the receiver.
I mean, it even has the lines through it.
Just the fences.
So it makes it really just a very nice appearance to it.
Of course, they have the slots here
for the collapsible stock.
And we have this metal sheeting over the end,
but you can still put it on.
The end cap again does have that sling swivel
and it does move.
And of course we do have a sling attachment
up here at the front.
So I can take my sling and hook it right into there.
And now I can carry it this way.
So it gives you a couple of different options
to be able to carry it and shoot it.
We have a hooded front sight and it does have a post.
And then here at the rear, you have that rotating drum
and you can just put that to any,
whatever windage you're shooting.
A lot of the originals though, had a peep sight
or an aperture sight on the back,
but this one just has the slots,
but really easy to be able to turn.
It's knurled.
And so it's very grippable to be able to turn it.
We have a scope mount area up here.
And this version does come with a Picatinny mount.
We'll take a look at it.
When you go with the claw mounts,
not only are they more expensive,
but this actually locks in better.
And that came with the original AP5 as well.
Non-reciprocating bolt handle comes back.
Again, it just locks into place,
but it does have texturing all here.
And then it just slams forward.
And of course it is in nine millimeters.
So it makes it a very short throw.
We have a slotted muzzle brake
and we have a detachment point right here
with knurling all the way around the ring.
This is a little different.
It has a nub that comes up and then you have these steps.
So bring this little lever down and then up.
And so you hit that back and it'll pop it up.
And then we can remove the brake.
And here we have a tri-lug adapter on here,
which is typical for your HK,
but we also have a threaded barrel
and we have the thread protector.
And this is half by 28 threads.
So you can put a suppressor on it,
even if you don't have the tri-lug adapter.
Then take your muzzle brake, slip it back over it.
Here you can see this little gap
and it fits right into that bar.
And so that's what locks it into place.
Now you want to make sure your muzzle
is in the upper position and then you bring it down
and then push it down.
And then it locks into place just like that.
It's a little tricky at first.
So we take it and lift it up just like this.
And then when you like it, you just push it down
and it locks on to this bar.
Trigger pull weight with our Lyman trigger gauge
from Brownells, six pounds, 1.3 ounces,
six pounds, 5.4 ounces.
And the weight on the Gray Team AP5,
five pounds, 1.6 ounces.
Now, of course, during the range time,
we added the SP tactical brace.
This is a great little option.
And what I love is it folds.
So it makes this still a very tiny package
and yet it makes it a much more capable firearm.
When you're at the range, putting this up,
using it either as a standard brace with your arm through
or resting it on your shoulder,
it gives you a lot more stability.
But with the end cap, you had that sling swivel
and it works really well with that.
In fact, again, even in diehard, that's what he used.
The MP5, it can be used in a number of different ways.
And to be honest with you,
the brace is just a matter of preference.
And guys, we have just revamped our website
at suitsgear.com.
There's a lot of different suits swag over there,
patches, t-shirts,
but there's also a lot of my favorite products are there.
We also have the suits deals
where we find all kinds of deals
and offer those to you guys at some of the best prices.
Another thing that we do is a lot of the videos
that were taken down by YouTube,
which we call our contraband or banned videos
and all that's over on suitsgear.com.
So check it out.
Big thanks to Fiocchi for sponsoring the ammo,
all made in the USA.
One of the biggest suppliers of ammunition in the country.
And of course, these MP5 mags are really easy to top load,
similar to your AR-15.
Just slides right in.
God, that thing shoots so nice.
Guys, there's nothing like an MP5,
except a less expensive MP5 like the AP5.
This is actually built on licensed HK machinery,
imported by Century Arms.
I love the little short K model.
I mean, this is awesome.
When Century first came out with their
little bit larger model,
but I really liked this size.
Put on one of the SB tactical braces,
which makes this a very tidy package.
But of course there is a sling mount on the back.
You can use it just with a sling.
HK magazines and those work great.
Muzzle brake seems very effective,
but the roller lock system in these is what is legendary.
It's a very soft shooting firearm.
Blowback action kind of gives it a little bit
back on your shoulder.
With the roller lock, it's super smooth.
And of course, what I really like is I can put my mag in,
do the HK slap, and I'm ready to go.
Once I drop my safety, just super smooth,
super freaking smooth.
I love the HK design, but if you get a traditional HK,
those things are in the thousands.
I mean, this is really a great alternative.
And again, built right there on HK machinery.
So the gray team model itself is a special edition,
but overall it is just a HK 94,
but about a third of the price.
And it's still a lot of fun.
I love it.
Okay, for disassembly,
we're going to remove our magazine.
Go ahead and check to make sure the gun is unloaded.
Now, first thing you do is you have two pins
here at the back.
And so we're going to go ahead and push those through.
They are not captive, so they will come all the way out.
It's funny on the HK rifles,
the stock has two pin holes to put these in.
And then of course there's one here at the bottom.
Now this will remove your end cap.
So it's very simple to do.
And again, when you want to put on a brace,
it makes it very simple to add.
Then we're going to pull back our charging handle
and we can pull out our bolt and bolt carrier.
Next, we have a pin right here at the front of our receiver
and we can pull it out.
And then we can just remove the entire trigger group.
Guys, this is one more beefy hammer system
and it's all contained in this grip module.
So the lower receiver contains this whole thing
and you can go ahead and we're going to just drop
that hammer.
I don't want to make it come forward.
You can see the really strong spring,
but again, this is compatible with all your HK parts.
So if you want to replace them with HK,
you can do that and they'll fit.
Now there've been a number of different HK's
that have been developed since 1966.
So there may be a little bit of fitting here and there,
but everything should fit.
Also, you can take your safety, move it all the way up,
and then we can pull this out
and we can just remove our entire fire control group.
And that way you can work on it,
you can replace it if you want.
I mean, this just gives you a lot of options.
I mean, this is the original chassis system
that we're seeing in handguns.
This really become the rage.
Now, if you're a recoil spring and guide rod,
it does come out of this housing.
There is a rubber seal right here.
So it takes just a little bit to do that.
Now to remove the bolt, pull it out and turn it clockwise.
You can pull it out and then we can pull out
our firing pin, spring, and assembly.
Real simple to do.
And of course, this is also a lock on here,
but it just works with the bolt.
Now with the bolt, pretty strong extractor,
and we do have this pin that's fit right here,
but you can replace that.
And these are your rollers for your roller-like action.
And so these are down,
and then as soon as it goes into the chamber,
they pop out and they lock.
And then when you fire, it goes back out
and they collapse back down.
And it just delays the action just a second,
and it just really mitigates the recoil.
But you can see, this is a really well-machined bolt.
Now for reassembly, there's only one way
to put in your firing pin,
and it's got this corresponding nub on the housing.
So we take it, we're just gonna go ahead and turn it.
And then we take our bolt and it fits
right into that firing pin.
And so right here, you'll see this little groove
that goes up, and so we're just gonna turn it
and we're gonna lock it back into place.
And you'll notice that when this is in the rear position,
these rollers are locked out.
And as we go forward, they go in.
Take your recoil spring again
and just place that into the housing.
Then we're gonna take our bolt, go ahead and reinsert it.
Then we're gonna take our fire control group
and put it back into place in the receiver.
Take your safety selector.
Again, it's gonna be going straight up.
And then we just bring it down.
We're gonna leave it on safe.
We're gonna bring the hammer in the rear position.
Now take your action.
Go ahead and set it up into the upper receiver.
And then take that front receiver pin
and go ahead and get it into place.
And make sure your bolt's in the forward position.
And then you can take your recoil spring
and push it and get your bolt back into place.
Then take your end cap and set it on the end.
It is under a little spring tension.
Then we're gonna reinsert our pins.
Disengage your safety.
Let's check for function.
And we're back in business.
Now keeping your firearms maintained and cleaned is vital.
Otis makes some of the best cleaning equipment out there.
They make a number of different kits
that are dedicated for different rifles, pistols.
They also have Shooter's Choice,
which makes excellent CLP and bore solvent
and different cleaning materials.
The Ripcord is one of their signatures
and there's a whole system based around it.
They are suppliers to the US military.
And so here we have our tactical kit.
It's a very compact little pouch
and you have everything you need
to keep your firearm cleaned in the field.
But then also they have larger kits
with the steel rods and with Ripcords
and they make a number,
in fact, probably the most I've ever seen.
And then of course they have tools as well.
So check out Otis Technologies, highly recommended.
And we wanna thank Otis for being a sponsor of the channel.
Now the Great Team Edition comes with a really cool backpack
and this has a lot of MOLLE attachments,
advanced warrior solutions.
I mean, this thing is really just a solid little pack.
Here we have areas for your magazines.
In fact, all your stuff will come in here.
And so we've got a slot for mags,
but also here in this zippered compartment,
it has additional mag capacity.
And of course, unloaded firearms only.
Nice pouch at the front.
And then of course this opens up
and we have a lot in here as well
where you can put your firearm.
One of the things about this, it has a very slick material.
This is gonna help protect it.
And you have pockets at the front.
So a really cool backpack.
And again, you also get your sling, cleaning kit.
Also included is a scope mount.
Now the HK typically has the claw mount,
which fits on and guys, sometimes it'll lose zero.
With this, we have these little notches
and we have a little brace at the top of the receiver.
This just nestles in and you can attach this
and it has all the attachment points.
So if you wanna throw on a red dot,
they also have actually a red dot mount,
like a small micro red dot.
So it gives you some options.
Great way to have an optic on here
and it keeps it really compact and it's very stable.
So really when it comes to a little bit
of the price increase, just the magazines themselves
run $69 and you're getting an additional mag and the bag.
I mean, so really, honestly,
it's a better deal than the standard AP5.
You also get an owner's manual
and you get a card of authenticity
for the Gray Team Special Limited Edition.
Now we come to the price.
The HK SP5K is $2,999.
When it comes to the standard AP5,
they run $1,359.
With the Gray model, you're $1,499
and you get an extra mag, you get the bag.
It really brings the price up to match the standard AP5,
but you get the limited edition.
And it does go to Gray Team and it does help veterans.
So what are pros and cons?
Well, first off, it's a legendary firearm,
built on HK machinery, the original technical plans,
the metallurgy.
I mean, this is honestly as close as you're gonna get
to an HK MP5 for half the price.
It does have the polymer receiver,
but so does the SP5K from HK.
Typically mounts are difficult on these with the claw mount,
but this comes with its own mount.
Sights, very well done.
Of course, the barrel sight at the back
and then your front post.
Having the tri-lug and the half by 28 thread
gives you a lot of options.
Plus this is a very effective muzzle brake.
And just this being a roller delay blowback
makes this very soft shooting.
It's a very compact firearm and you can get models
with the SP tactical brace included,
but you can get one like this and add your own brace.
Again, guys, this is the only licensed copy
of the HK MP5 in civilian version.
Fairly easy to maintain.
One con is with the standard MP5s,
all the HK91, the 93, which is 223,
and then of course the MP5,
is that there is a schedule of maintenance
if you're shooting this a lot.
But parts are available and you can keep this maintained,
but they're a very robust action.
Another con could be possibly that you want an HK.
You want the real deal.
It's out there and those are incredible firearms.
But really, I don't think you're gonna be missing much
other than the name for the MKE version.
And with the great team, of course,
you're helping veterans, but also you're getting the bag,
the extra mags, the scope mount.
And so it gives you this setup right out of the box.
And the magazines do run $69.
And honestly, that's whether you get them from Century Arms
or the same price for your HK mags.
And it's in a millimeter, so it gives you a lot of options
with that really soft shooting caliber
and a little bit cheaper than most of your rifle calibers
to be able to feed it.
Guys, if you've always loved the MP5,
but yet the price tag scared you,
we're coming in with a clone that is actually produced
on H&K Machinery, technical plans, metallurgy,
I mean, and compatible with all the MP5 parts.
And you're supporting great team,
which is a great cause, supporting our veterans.
And again, a big thank you to Century Arms
for sending the AP5P Great Team Edition
and for their support for US veterans.
Be strong, be of good courage.
God bless America, long live the Republic.
Tiny and compactable.
Okay, what you wanna do is to bring that down and out.
And how am I gonna do that?
HK Machinery.
When it comes to your bolt, you can just remove the...
Can you?
Yeah.
You wanna make sure you don't turn it too fast
because you don't want for this to come flying out.
Why is that doing that?
With a bolt, pull it out and turn it clockwise.
Nope, counterclockwise.
Dang, guys.
Did I say counterclockwise?
It's a very soft shooting hand, rifle.
Soft shooting firearm.
And guys, we're back in business.
If I got it on safety.
That's it.
Is that it?
That's gotta do accuracy.
Oh, come on.
Let's do something real.
