HK416 clone - BRN4 to 500yds: Practical Accuracy

Sunday Enjoy
2 followers
28 Video Views·Dec 12, 2024
That's good, a good start, alright 200, hit, hit, did you see that?
And that's the Gen 2 E, which is the light inversion of the razor already, right, well it's the same one that we used on the Mr. 556, yeah, alright, I am on at 350, off the left edge on the top line of the plate, impact, impact.
You feel that gust finally coming in.
It was tricky because it was pretty dead here.
Yeah, that's why I didn't adjust, I mean it was just, it was flat, and I did not observe vegetation, that's the problem though.
400.
Just off the left edge.
Great elevation.
Impact.
It's pushing it to the left a little, even more right now.
Yeah.
Alright, I'm out at 450.
Just off the left edge.
Impact.
Neutralized.
I don't know if you saw it, but there was a bird on that target.
He took off real quick when you hit it.
Rocked his world, baby.
Alright, fire when ready.
Impact.
Dude, 19 rounds, that's a new record.
I'll tell you what.
That's just set the new record, 19 rounds.
For service rifle, out to 500?
Yeah.
These, you know, when we start getting into, what we haven't really done yet, is we haven't really taken any free float ARs with nice glass, and shot them on as a service rifle.
Obviously we've done it with the Mark 12, we've done it with the LSA, the M110, but then we extended those out and beyond.
And those I think all cleared the close range either without a miss, or, I said the close range, the 500 and either without a miss, or with like one miss.
But what we're seeing obviously is when you get a rifle done up with a nice piece of glass, 1-6, 2.5-10 in that range, 16 inch AR shooting 77 grain pills is kind of shred.
And I mean this is, obviously, I mean because the 416 is not a civilian rifle, so, and the receiver is a little different from the MR556s.
So, the lower receiver is a Brownells reproduction to look like the HK.
It's done on the same forgings though.
So it's an 80% H&K, 80% forging.
And then they just finish it.
They finished it.
Now, the barrel is also the claim of fame of what HK uses.
And so these two pieces are not H&K, the rest are.
My concern with, and you know this, the accuracy of any rifle lies in the pipe.
So my worry was that them using a repro pipe was going to adversely cause issues.
Yeah, but it did not.
I mean, and this is a pretty typical SF loadout that you see nowadays.
Yeah, LPVO.
416, piston driven 416 LPVO.
And if you're talking about this as a combat effective weapon, I think it's far more combat effective than an ACOG.
Yeah.
Because throw the lever down to one, and you've got something that could duplicate a red dot.
Especially the razors, they glow bright enough.
Yeah, the daylight visibility on them is very, very good.
So you could use it to duplicate what an EOTech could do.
I mean, that's what all of the competition shooters who shoot three gun and whatnot, that's exactly what they're doing.
Which is another thing that goes back to what we talk about.
SF look at competition shooters at what they're doing, what they're experimenting in their little laboratory of a competition welder,
and then bring it out to the real world.
Yeah, the things that are transferable or that make sense to carry through.
Now, obviously it's a really cool rifle.
It's just set a new record on our course.
That being said, the recoil is a concern for me for 5.56.
I mean, this feels something between almost like a 7.62x39, but a little lighter.
And for a 5.56, for me it's a little heavier for my taste.
Yeah, I noticed that as well whenever I shot it on the close range.
It did feel like there was more felt recoil than what I normally am used to shooting an AR style platform.
I will say too though, if I got to choose between the MR556 and the 416, 416 any day.
Easy, not even close.
So, I mean, the piston already adds weight to it.
So, the MR556 using that heavy barrel, it makes it so front heavy.
The balance of the rifle is just totally wonky on that one.
At least, I mean, I know it shot very well.
We had a great run on the course with it.
It was one shot shy of this.
Yeah, perfectly capable firearm.
In terms of versatility, this feels so much more versatile based upon the weight and the weight distribution.
Being able to shave off that weight in the front was huge.
But still, it's still heavy for a 5.56 rifle.
Yeah, I agree.
As a base, because you've got to remember that there's no light, no lasers, no iron sights.
This is like a completely stripped gun with an LPVO slapped on top.
Right, exactly.
So, I mean, if you were doing a loadout, you'd have a PEQ unit.
You'd have whatever type of grip attachment you'd want.
Light, as you said.
And that itself, it adds what? Probably a pound and a half?
A couple pounds, yeah.
One thing that I think is interesting, one of the points the MR556 has,
it's got the takedown pins that lock the upper and lower receiver.
You can see, the 416 does not have the locking takedown pins.
Yep.
I feel like it's immaterial.
Yeah.
In terms of it locks the wiggle between the receivers.
But it's immaterial.
To me, I mean, that's never been a thing.
I mean, back in the day when people used AccuWedges to lock the upper and lower receiver.
I've not seen any detrimental accuracy.
And now, granted, we've not done extensive testing on this.
Yeah, but still, we've shot enough different platforms,
and some of them do wiggle a little bit between the top and bottom.
I don't see an issue between the top and bottom wiggles to warrant a system
that needs a specific takedown tool to unbuckle the top and the bottom.
Agree, yeah, agree.
But, again, we didn't use it today because, again,
we were trying to do a little bit more of a combat style, you know,
no rear bag type of shoot.
But the shelf, I really like that design for the collapsible stock.
Right, so you can place your rear bag there.
Without accidentally activating your stock.
Releasing the stock, yeah.
So, all in all, I mean, it's a good system.
I know they had reliability in mind, kind of like how AKs are over-gassed.
Yeah.
I feel like 416s are over-gassed.
Yeah, quote-unquote, yeah.
But there's a reason to it, I think, too.
We haven't dragged it in mud.
I don't intend to take Brownell's rifle to drag through mud.
That being said, we do need to do a shout-out to Chris
from Small Arms Solutions and Brownell's to making this happen.
I mean, it's not every day you get a pretty,
I hate using this term, but clone-correct, 416 to test with.
Minus the barrel and the receiver.
So, very happy, very happy with it.
Cool. Awesome.
Do you enjoy arguing with other viewers on the internet
on which rifle performs better on practical accuracy?
Well, we have a solution for you.
Go to our Patreon page and scroll down.
You'll find the Practical Accuracy Scoreboard
where we have ranked and compiled all the data
of all the firearms we have tested on the Practical Accuracy course.
Furthermore, it's already separated into the different categories
so you can go back to your argument as quickly as possible.
And whether you decide to support us via Patreon,
subscription, or just a normal viewer, we thank you.
716, this is 096, 4-6, 8-packs, red con 1, green to green, copy, over.
096, this is 716, roger, over.
1-6, 0-9-1, 1-pack, green, green, over.
716, roger, over.
1-6, 15-9-2, 1-victor, 2-packs, red con 1, over.
