How to Secure Ratchet Strap Ends and Avoid Disaster!

DirtFarmerJay
310 followers
43 Video Views·Jan 4, 2025
hi dirt farmer J here from dirtfarmer
j.com well you've secured the load uh
with a ratchet strap in the back of your
truck or trailer but the job's not done
until you secure the excess end I'm
going to show you five ways using common
objects from around the home or the shop
to get the job done and get you on your
way safe stay
[Music]
tuned let's get started for all of these
techniques where we're going to secure
uh the tail end we're going to do it on
this side of the ratchet mechanism not
on the other side we want to keep this
handle clear so if you need to retension
the loads you don't have to undo
anything it's all on this side over here
so all of these five techniques all
depend on using a stack uh where we're
going to zigzag back and forth and then
it's secured in various ways so let's go
ahead and stack the first one
okay method
one use this kind of device a ball
bungee and I would just tighten it
around twice clamp there it is number
one number two use a large binder clip
like
this number three use some kind of
velcro or hook and loop strap like
this number four use some kind of small
uh bungee cord either a rubber type that
can be wrapped around several times or
an elastic cord type like this
[Music]
[Music]
and number five you can use a cable tie
like
this now be aware that when you do and
you cinch it down that you're also going
to have to cut it off but it has secured
it really well and that is ready to go
but what if you don't have any of these
materials or you just want to use the
strap itself well I haven't even showed
you my two favorite techniques yet check
out this video right there where we show
you how to do securement of the end
without any tools or materials we'll see
you there
