Full 365 days in 48 min. Vintage car + Bugatti using the Wattsan CNC machine. BIG part 1. Homemade.

Tuning Pro
54 followers
This video sponsored by Squarespace. This is a big series on the construction of our crazy project
with unique shots that were not included in the main series, we fit a whole year of work in one
video time, we'll tell what will happen, and we will begin. Enjoy watching. So this is the
beginning of our next crazy project, which will be based, or rather stand on a Ford test. More
precisely what is left of it. Alan Cocoeff made two options. Here is his Instagram. The first with
a roof from a Volga, and the second with a roof from a Bugatti. Without thinking twice we settled
on the second option. It's clear that we didn't buy a Bugatti, in order to take the base and rear
end from it. And Ford was not chosen by chance, the wheelbase is almost the same as that of the
Bugatti, and for the rest of the dimensions it also fits perfectly. The next step we went in
search of the 21st Volga. I found a good option in a neighboring village. We load it on a tow truck
and take it to the workshop. Since we only need body panels, the technical condition has no role,
and therefore the body was bought for parts. First of all we throw off the hood, first from
the Volga, and then, from the Ford. Since there is no clear instruction on how to combine a Volga
with a Bugatti, based on a Ford, at this stage everything is done, in advance, and with clamp.
We firmly decided that we needed to reposition front wheels in order to get a result, as close
to the concept in the picture as possible. There were a lot of suggestions to just shift the arch,
but that's not an option. Here's a clear example, of what it looks like when you just shift the
arch. So our friends helped us with this issue. As you can imagine it is not an easy job to shift
the wheels by 6 inches on a front-wheel-drive car so that it drives smoothly afterwards.
It's not the first time guys have done this, they've done a lot of cool projects.
Including remodeling ordinary cars into drift cars. In the end every car was driving great.
In our case that's exactly how it turned out. First the struts were moved. Then step by step
the engine and suspension were moved forward by 6 inches. The guys helped us a lot and the rest is
up to us. We'll have to do the wiring, figure out how and where to put the radiator in, but I'll come
back to that a little bit later. The main thing is that the wheels are in the right place the car
steers and drives straight. We put the hood clearly in the center and decide to base on it.
We took the native loops from Ford and connected them with the landing pads of the Volga's bonnet.
The result is a simple design and a removable hood, which is very important. When the hood
is in place we throw off the remaining front end elements from the Volga. In order to integrate the
grille fenders and bumper it's necessary to remove all unnecessary that goes beyond the dimensions of
the Volga S panels. And after an hour of trimming and fitting we put on the fender. In general
everything worked and we can say that it was rather easy than expected now it remains to make
the platforms on which the fenders will fall. For this a square profile was taken and then everything
is clear without further ado. After half a day of work we have such platforms that are perfectly
symmetrical with each other which in principle can be seen when the hood is closed. The next step is
to patch up what has been unpatched. A bit of sheet metal couple of hours of welding and in general
everything looks more or less neat almost like a factory. In order for the hood to close and open
we again go to the donor and carefully uninstall this panel on which the hood is located in the
original. It's clear that the Ford lock will no longer be useful to us therefore we remove it and
put it on the distant shelf. Then many many hours of fitting and for you it's only a few minutes.
When we have clearly decided on the location we attach the grille to this panel for ease of
positioning and tack it with welding. In order to close all the gaps between the Ford and Volga
panels we make a dozen cardboard templates which we then transfer to the metal and the metal in
turn will be transferred to the body. When all the patches are ready we fix the shelf with a hard
wire and we begin to patch. After half a day of welding and the same amount of cleaning of the
seams we have the following result. Everything is clear rigid and made of metal it will remain to
putty and prime everything minimally. The Volga bumper at the factory rests on this strange panel
and we mount it to the Ford body. When the main power elements have taken their places you can do
a preliminary assembly and already a little understand what we have. According to the factory
Bugatti slippers are size 20 real Italian 20s wheels from OZ. So we lifted the car put it on a
rack removed the old wheels and here's for comparison as they say before and after the donation.
When the wheel plates fell into place it became clear how many inches are they from the hub
which means we can order spacers. What is it and how does it work? Using these plates which are
ordered individually you can put any wheels on any car within reason. Also spacers are often used
to extend the wheel plates and in our case they're two in one that is we put wool plates that
initially did not fit and extend them out by two inches. As a result we get the wheel as in the
picture. Trying on spacers it was hard not to notice the terrible state of brake discs and pads.
I don't think it's worth explaining the importance of the braking system therefore where possible we
want to achieve maximum reliability. The brake pads were also replaced. We've more or less figured
out the front but things are more complicated with the rear. After a little thought we decided to buy
a Bugatti. Yes yes the same Bugatti Chiron in a 3D model. It cost us only 25 dollars and here's how
it looks. We'll make a body based on it. I mean the part of the body that we need for the project
so to speak non-waste production. In the 3D model we cut the body in parts and then cut the panel
into thinner ones. Each such panel should not exceed a thickness of four inches. So why did we
divide all the parts into four inch thick panels? This is due to the length of the cutter, the stroke
of the spindle and so on. And based on these technical features we came to the conclusion
that it is easier to cut many panels with a thickness of four inches and then glue them into
one whole body. How does it work? We put a sheet of polystyrene on the CNC. The sheet size is almost
and starting from the given program we start bar relief cutting for many many hours
sheet by sheet. After a few days of sharp milling and sampling we move on to the next stage.
First of all we release the blanks from the sheets. At first glance you might think that there
is a lot of waste and one more body of some smart could be cut out of them. Yes a body of a smart
would fit here without any problems but the elements of Bugatti can't. Believe me if it was
possible to arrange the parts more economically we would do it given the cost of materials
recently. So we cut out everything superfluous with a knife and an hour later we have such a
pile of Lego parts for adults. At first glance it seems that it is unreal to sort out this chaos
but trust me if you spend a couple of days at the computer thinking how to cut the body correctly
and into what parts you'll know each part by name and determine it even with your eyes closed.
The whole thing will be assembled using polyurethane glue. It looks like mounting foam
but unlike it the glue does not increase in volume. To avoid waiting until the glue seizes on the
previous layer and for better fixation we screw all the elements together with self-tapping screws
part after part, hour after hour. After two days of work we have three main separate elements,
a roof and two sides. All there's left to do is to connect them and get a solid structure.
Here's how it looks. We adjust the junctions with a grinder with a pedal circle. We apply
the same glue and then we screw them together with self-tapping screws. The next day when
the glue is dried we have a one-piece body and now we can clearly see the parts that need to be
improved. We fill such holes with the same glue. We wait until it dries, cut off the excess and
move on. Now we can finish the form which is what Andrei is doing. Flexible planer Varius
lasts a couple of days of work and 10 years of experience will make a shape close to the ideal
as far as it is possible to do it with expanded polystyrene. The next step is to prime and putty
the form in order to make its mold later. Most often this operation is replaced by pasting with
metal tape and the matrix is made by it. We use a slightly different technology. Rather, it's a
matter of habit but it's easier for us. The first layer is priming. In our case, it's a simple
water-based paint. Yes, the one that is used for painting walls and this is important as any other
resin or solvent-based material ruthlessly corrode expanded polystyrene. Here's a good example. Just
imagine, let's say you made a car body, cutting it out, gluing it, finishing it for a couple of
months and finally, the long-awaited final primer. You primed it and after 15 minutes the body is
gone. That is why at this stage we use water-based materials. In addition, they are much cheaper than
professional two-component materials and they are just perfect for these purposes. After we applied
the first layer, all the spots that need to be putty appeared. The putty used is also one-component
water-based. Yes, yes, the one that's used to putty walls. The next step is the developing layer.
Most often, the base paint of a dark color is used. It is applied around the entire perimeter
and later when grinding, all craters, chips, indentations, and rough stripes from sandpaper
are clearly visible. Along the body are such thin longitudinal lines. They are also above the arches.
To keep them crisp, thin, and elegant, we need to line them properly. Masking tape is glued along
the line and starting from it, planes are lined. The main thing here is to stick the tape correctly
and evenly otherwise you might line something that was not planned. Well, then a few days of grinding
and a couple of pounds of dust. We did was to determine the places where matrices would attach
and detach from each other. That's where we made the edge. That is, the entire structure will consist
of many rigid elements which will be assembled into one large integral matrix with the help
of bolts. This edge will be the connection point. It is made of plastic piece by piece. We were
fitting it to the shape of the body and tacking it on the hot melt glue. The Bugatti has a mohawk
in the center of the roof. It will be very difficult to fit it into the matrix. It is much
easier to make it separately, so at this stage, we remove it. Then we do the flanging. It's already
clear now how it works and into which elements we divided the body in order to get the fiberglass
part out of the matrix without any problems in the future. The first layer is the release agent,
tinted blue, so that it can be clearly seen where and how much of it is applied. This is a release
agent based on white glue. It is considered single use, unlike wax, but in our case it works better
because we are not planning to make a line production of bodies for Bugatti, and in terms
of time this release agent is much faster than applying wax in several layers, polishing it and
so on. So, for a single copy it is easier to use this kind of single use release agent. We applied
the release agent to elements that are not adjacent to each other, and this was made for a reason.
A little later you will understand why we did it that way. Then we tape the adjacent elements with
a film in order not to spoil them with compounds that will be applied on the blue areas.
The next layer after the release agent is gel coat. In the white compound, we add a little bit
of the same one but black. Then we add the activator and we get a gray gel coat which is
applied evenly with a brush. We made it gray so that it is visible where and how much of it is
applied. Also the difference in the two colors allows you to see how well and evenly mixed the
compound. This is very important so it has to be well mixed. Basically this is the first layer
which will be the front layer after we finish the work. The release agent will be removed as a thin
film. The next step is to apply glass fiber mat covering it with polyester resin. We do this when
the gel coat has already hardened. You cannot press it through with your nail but it is still
sticky like scotch tape. That's when you have to apply polyester resin so that all the layers are
well joined and stick together. It's pretty the same story here with polyester resin. Polyester
resin is a two-component compound so we mix A plus B nicely and apply the first layer with a roller.
Then layer by layer we spread the glass fiber mat. We used the material with a density of 150, 300,
450 and 600. These are grams per square meter but we used 150 density glass fiber mat only in the
most difficult, delicate places where it is complicated to spread the thick material evenly.
So basically the work started with 300 density and then everything is clearly seen, a layer of
glass fiber, polyester resin and a roller. But you can't spread out a couple of layers at once.
According to the technology you can spread out the next layer the next day as polyester resin
is strongly heated during polymerization and if you make a thick layer of it, this compound would
deform when heated and can easily deform the framework on which we applied it. And of course
the polyester resin shrinks as it dries. If you apply it layer by layer it's not a big deal and
it's unnoticeable so we did it this way layer by layer, day after day. And in the end it took Andre
almost two weeks to do this work. Each layer is well coated with resin and rolled with a roller.
In the end we used this metal roller with needles to remove all the air that remains under the glass
fiber mat. Before applying the next layer we run a coarse sandpaper over the entire area to remove
the obvious roughness and needles from the glass fiber mat. In the end in order to create a more
or less rigid matrix form we put two layers of 300 mat, three layers of 450 mat and two layers
of 600 mat. It took 132 pounds of polyester resin, 9 pounds of gel coat and a lot of workdays for
Andre. So why did we tape and zone the areas? As you remember at the joints we have plastic edges.
We've already put glass fiber mat on them from one of the sides. Now is the time to remove the
plastic. As a result instead of a flimsy plastic edge we have a rigid edge which is an integral
part of the main element. Now all that's left is to put glass fiber mat on this side as well and
we will get the right design. But once again a surprise was expecting us. In some places the
resin has found way out. We peel off the top layer of gel coat, clean up and putty the spots where
the resin has eaten away the workpiece. The rest was done in the same way. A few days we covered it
with the glass fiber mat layer by layer and now we have a finished matrix which should be detached
and then we'll evaluate the result. The first thing to do is to cut off the sharp edge with a disc grinder.
The next step is to drill holes around the perimeter. Later during assemble process we'll
insert bolts in the holes and it will be possible to tighten all the parts of the matrix together.
And finally we start to disassemble the construction. As you see the edge has been
lubricated with a release agent and now it has a clear border which perfectly adheres to each other.
The second edge was applied in a liquid state and perfectly took shape. Basically that's what you see
on the screen. In the end we didn't manage to keep the expanded polystyrene blank intact. Although
no one really tried because after gluing it we realized that it's impossible to take it out of
this room. There are only two small doors. Well if we fold the expanded polystyrene body into the
trash bags it goes perfectly through the door. As you can see the construction was large complex
and rigid so we disassemble it by all available methods. In the end the matrix is ready. It is
good. So we assembled the matrix and prepared it for the application of the parting agent.
Now we can use wax. We leave it here for five minutes. Each time we're going to polish it. The
wax works as the parting agent so that after putting all the layers we could easily take out
this large and complex form out of the matrix. And now we have to use the method of applying
five layers of wax. We need to polish the wax properly. As the competent people say we have
Okay what is the next stage? The first layer is gel coat. Roughly speaking it's a special primer
that is going to be the facing layer of our body when we get it out of the matrix.
What about the next step? The next step is to apply the glass mat. In contrast to the matrix
we're going to gain the thickness right away. We're going to use one layer of glass mat 303
layers of glass mat 450. The estimated thickness of the piece is about three millimeters. You've
seen this process a several times. I suggest we shouldn't dwell on it let's move on to the fun
part we unpack the matrix and get a solid fiberglass bodywork. And by the way a footage
to prove how solid this material is. And then we unscrew 50 bolts and get to the unpacking.
You can clearly see why the bodywork was divided in several pieces and was isolated this way.
In the end this complex solid form is disassembled easily and we have a finished body.
We just need to get it in another workshop six miles away.
But before that we cut off all the excesses and the remaining glass mat.
After that we polish the sharpest places. We're doing right now because we want to carry this
body with our bare hands from one place to another. If you cut your finger with or got a splinter of
glass mat once you know exactly why. All in all I think the fiberglass bodywork is quite a decent
technology. One of the main advantages of it is that this body will never rot or rust. By the way
the experiments with plastic car bodies was conducted back in the 1950s. And the first
production car with fiberglass body was Chevrolet Corvette in 1953. Just imagine 70 years ago. But
this material has disadvantages of course. But that's a topic for another video. And in this
care this is obviously and simply the right option. Many know that in addition to creating unusual
cars our workshop also creates smart tables. Finally we decided to make it for sale. Of course
no business can be successful without a working and usable website. It's possible to make such a
website in approximately 10 minutes on the platform Squarespace the sponsor of this video.
For this you need to choose template and customize it for yourself. In a few clicks you can personalize
your site. And what I like about Squarespace the ability to see how the site will look on different
platforms. It's easy to make changes and you don't need to be a programmer to set something on your
website. Number of ready-made templates over 100. All of them are free and available in a choice.
Also all these templates have adaptive layout. All are made qualitatively and correctly displayed
in all types of different devices. There's no problems with editing the site. Everything is
clear even for novice users. Editing content may be performed by man not familiar with the layout
of web pages and programming. The Squarespace base has many controls, animation, fonts. All this can
be customized for yourself to create individual style that no one has. You can save 10% using code
access courage when ordering. So the next stage is to cut everything that prevents the fiberglass
shell lower. But first we take off everything we can until we have just a naked bodywork.
This is what the guys are doing. By the way this is an unusual way to attach a bumper. Three rivets,
a metal plate, and the car gets perfect gaps. It wasn't hit, wasn't painted. We should give credit
to the previous owner because the condition of the body is really great. In the first video I've
told you that we bought this car partially disassembled. This was an unfinished project
but the work on the body was almost completely finished. Considering the fact that it's Ford
and it's from 1992, we can say that the body in a perfect shape apart from a a few parts but we're
gonna fix them. We removed this torpedo dashboard and now there's just one little thing. We're gonna
remove the heater, all the cables and wires because we're gonna do a lot of sawing, cutting,
and welding and all this plastic will hinder us greatly and we can accidentally burn it.
Before cutting off the roof we need to cut out the windows. It's a pretty easy task we only need one
string and two bass guitar players. As for the rest of the interior, they removed everything
from here before us. We bought this car like this. The previous owner repaired the body, painted it,
but then he stopped working on it. In fact this happens all the time when a car restoration
project lasts for a couple of years. All in all it's not about the skills or the experience. Most
commonly the enthusiasts lose interest in their projects and then it's quite hard to resume the
project you've abandoned for a year. I think anyone who was in this situation will know what I'm
talking about and in the end these projects end up on Craigslist or similar websites and the ads
say it's almost completed you just need to assemble it and we bought it to disassemble it even more.
After a few hours of work we have an almost completely cleared body so the next step is to
the moron who created Bugatti made it such a way that we can't put the roof on top of it
and since the angle of the back window is completely different that's why to stop the
body from collapsing when we saw the roof, we create improvised braces of the body.
Yeah these braces are very important. The car really collapses if it's not a framework or
convertible type of car. They work in a completely different way and the body is designed very
thoroughly. But our car is not convertible that's why we installed the braces. Okay that's it we
strengthened the bodywork now we get on with the sawing. The next step is to draw an arbitrary line
and the show begins. Then we use every tool that can saw, cut or affect metal in any way.
The Bugatti S body is shorter than Ford's body and in order to put the fiberglass shell on it
we have to shorten it. We put it on and realize that it doesn't fit at all. It's not hard to lower
a car by adjusting the suspension and before installing the new suspension. We need to make
sure if it will fix the problem and if we can install the bodywork forward if we set the car
as low as possible. To do this we put the car on the pads trying not to drop it on the ground.
For the next hour we were busy picking proper pieces of wood meanwhile measuring the gap
with a super precise tool. The foot of our former stancer. Here there's our Bugatti.
This is our Bugatti. After the specialist approved the height we put the bodywork on.
Now it's all become clear and the lowering the car solves this problem. To do this we've decided
to cut off the coil springs and they order coilovers and do it properly. That's exactly
what we did in the end. We cut off the coil springs to install the wheel properly. We put
what's left of the shock absorbers back and then it became clear that the arches don't fit to the
clearance. Right now we lowered our car with improvised means without coilovers. We're gonna
have round arch just like in the picture and to keep the work going we're gonna weld the arches
again. I think it starts to look pretty cool we really like this picture. The degree is right
it's going great. So let's weld some arches. After a few hours of work we can see the shape clearer.
The top of the Volga part has this nice round edge and now we're gonna try to replicate it
with improvised means. We install the arch using screws and then it just falls into place. We take
out the temporary screws and put the permanent arch on the temporary fender. Since these metal
body parts will be covered with pounds of plaster we're gonna perfect it and create a matrix and
then we create all these elements from fiberglass. In the end we're gonna get fine and light panels
that will perfectly fit to our tasks but it's just a theory. In practice we're gonna remake
them a several times. So at the first glance it looks pretty weird. The thing is that it
lacks decorations that makes a car look the way it's supposed to. For example this is how the
appearance changes when we put on a minimal set, a front bumper, a sill and drag the wheel where it
should be. And that's when I had a sigh of relief because I 100% pleased with the proportions.
That's the most important thing. The rest part of the work is to finish the body and a few other
things. Yeah it's not that easy but it's just a matter of time and to get the right outline was
our main task. Meanwhile the work on the racks doesn't stop. After two Valera hours and one
Andre day of measurements which in fact is the same thing it became clear that it would definitely
not work to fit the donor's windshield struts to the Bugatti body. Therefore we cut off all the
excess and separate the racks. We decided to make the arc like this. We took a simple plastic form.
We checked how it would look and what we need to change. That is that's about how we figured it
out. So we realized what angle we need in order to get here this smooth beautiful shape which is
such an integral feature of Bugatti. Therefore we took plastic and the boys had to make it out of
metal. As you can see this is done manually. The main task here is to get two absolutely identical
arcs for the body to be correct and symmetrical in the future. Therefore after each operation we
compare one pipe to another and adjust them based on the result. We estimated this shape by eye and
based on the height of the car which we need to get in the future. A few hours later we have a
pipe of this shape which is firmly inserted into the cavity of the factory pillar. We merge them
slightly by welding and check the symmetry with a laser level. We understand that everything is
okay so we can weld everything well. We also thoroughly weld the pipe in the front. In such
hard-to-reach places it is difficult to weld everything well but with the help of an angle
grinder a hard-to-reach place turns into a very easy to reach one and we can continue welding.
In the back we weld the pipe in the region of the strut mount to a pre-reinforced platform.
The next step is to thoroughly weld the structure at the cut-off point of the factory pillar
simultaneously adjusting the metal well and so on both sides. After everything is tightly welded we
take control measurements adjust the shape with a jack quite a bit mtry on the template and in
general we are very pleased with the result. The shape of the shell and the arches fit together
perfectly and this means that we can safely finish the bearing frame. It would be more correct
to call it a safety cage. Most often such a thing is done in racing cars and it is needed in order
to save the living space of the car crew in the event of an accident and it is also used for
longitudinal reinforcement of the body. Initially safety frames were used in rally races but later
their use became mandatory in other disciplines. It is made only from round pipes since round sides
are less traumatic. Depending on the complexity of the frame design different reinforcement options
are possible starting from simple ones these are arches over the heads of the driver and passenger
and ending with complex ones a spatial skeleton that combines the front and rear suspension cups
into one power structure sills and sidewalls as well as the safety cage of the car interior itself.
This is exactly what we should get. Here's a good example of how such a frame works and saves lives.
Of course we're not going to participate in races and we are making the frame only because we have
completely cut off the upper part of the body which did not fit into the project at all. Now we need
to marry our pillars with a frame because so far they have nothing in common. As a result everything
is visually clear here at fixing points to the bottom and strut mounts reinforced platforms were
made of thick metal. In the end we attach the pipe to the back it will replace a piece of spar and
body. The only place that we didn't have time to finish was the base of the pillars. They need to
be honed. A bit of sheet metal angle grinder and tack weld after two valera hours one side is ready
but Andrei had to do the second one. As a result it looks like this. The next step is to prime the
frame. First we thoroughly degrease it. We dilute a bit of black primer stir it well and we can get
to work. As you may have noticed the guys often work without respirators and the cameraman is
no exception. This is how the whole process looks from the outside after an hour of painting without
a respirator. By that time the safety cage has already dried up 10 times and we can do another
fitting. This is another fitting of our shell to understand what problems we can face in the future
and this is that our Bugatti sill is much higher and it's a little wider than that of Ford.
We have 15 centimeters of space that we need to fill with something. This is exactly where the
fiberglass shell of the sill is joined to the metal body of a Ford. This will be the basis for future
sills. It remains only to fit cut and install it in the body. To get this panel as close to the
doorway as possible we had to fiddle around with it. We saw the sheet of metal in some places alone.
We also make a lot of incisions in the places where we'll bend it. We adjust it try it on and
so many many times. When the mold is fitted to the opening we are ready to weld it. As you understand
the solvent vapors have not yet disappeared and the cameraman sees the garage exactly like this.
As a result it took about six fuller hours and two cutting discs to adjust the door sill.
At this stage before welding we need to sand the body in those places where the metal will be
welded since in the future we will have no access to the inside of this box so we prime it in advance
with zinc primer or weld through primer. What's the point in removing paint and applying primer?
The thing is that the temperature is very high at the welding points and the usual coating burns
out. Accordingly, the metal is exposed and we have corrosion inside the box. But a special primer is
not subject to these provocations and holds firm even at this temperature. Something like that.
The next step is to assemble the already primed puzzle. Well, further work on adjusting the door
sill is on your screen. Valera clearly measured everything, adjusted it, hammered it and in three
Valera hours we have such a box which as a result is welded on all sides with reliable and thick
metal. In the final we cut off the jointing edge which we made with a margin. We prime it and have
this beauty. We are adjusting the door. First we disassemble it and take out all the stuffing,
glass, glass guides, lock and a window lifter. Then we cut off the bottom of the door by leaving a
small margin. It is this part that prevents us from installing the door into a new narrower doorway.
And finally the first fitting. We watch, evaluate, understand what needs to be fixed and fix it. Then
we try on the door again and that's what we get. We made this new detail, we carefully implanted
in here, it remains only to give it the right curve and we'll get a completely new bottom of
the door. As a result that's exactly what we did. We fitted a beautiful new panel around the entire
perimeter, cut it a little, bent it and minted it. Roughly fixed it with screws and the next
Andrei day after welding, we have such a picture which in principle we are very pleased with.
Okay, the main issue is that the doorway of Volga is 35 inches. So the lining is the same.
But in our project in the concept the door is twice as long. And if we use two linings we can't
work with this part. So, we have to be smart. For that we took two Volga door linings and using
improvised means we put it in the same plane, thank God, the form is really simple and the
horizontal line goes straight without any deviations, curves and transitions. In the end
we have the right form of the door lining. The stock Volga has the same lining but twice as long.
We stick metallized duct tape on every hole and joint. In the end we have this panel. We measure
it and after that we'll recreate this piece using fiberglass. We're gonna do this according to the
old pattern. First we use the release agent, then the gel coat, a few layers of glass mat, soaked
in polyester and after half an androday we completed the matrix. It looks like this.
The next step is to fit the door trim. To do this we cut it off, put it on the body and fix it on
the spot. Then we go to the Volga donor to remove the door handle. In the final version the door
will be a little shorter and behind it there will be an air intake as in the original Bugatti.
In the end we were satisfied with it and this means that we can fix it for good.
In order for the fiberglass lining on the door to be fixed on well we need to modify the upper
part of the four door. With the help of a simple device and a Chelyabinsk marker this panel is made.
It's welded into its place and we proceed to the handle. You can see it yourself. We cut out the
hole and after a few valera hours we managed to cross the lever mechanism of the door lock with
the handle from the Volga. With the help of this thing as a result everything works fine, it opens
and closes. But now we are faced with a question that we need to raise the window and the original
glass does not fit here anymore since our original mechanism will not enter either because our door
is shorter. So this is what we did. First the mechanism was disassembled, extra bits were cut
size. Now the next step is to make a pattern for our future glass since this original glass does
not fit our doorway and we need to make a new glass. First of all we decided to make a pattern
of the future glass from plexiglass and in the future to give this sample to production for the
A suitable cardboard was cut out, transferred to plexiglass, cut along the contour with a grinder,
fixed to the mechanism and put in place and it became clear that when opening and closing the
glass will rest against the visor of the Bugatti case. With the help of a pipe bend this arc was
made. As a result we have a limiter. The glass will be attached to it in the future. Now it remains to
make the right pattern. Here on the table we see glass from our Bugatti and a donor from which we
will try to make a template for the further manufacture of new glass. See that it's straight.
This is plexiglass. It gives into molding very well but at a certain temperature. Now we are
trying to connect say two improvised glasses together so that our plexiglass takes the form
of glass from Bugatti. But to do this we will first prepare everything and put them together.
Judging by what we see, I think the experiment was a success. The form has acquired the features
we need. You can see immediately that the desired radius has been achieved.
In general plexiglass completely covered our original glass.
We're slowly getting to the front panel matrix, the fenders and the hood.
Eventually we will replace this tired metal with fresh lightweight and strong fiberglass.
For this we remove the decorative elements, clean up the rust and start polishing.
Since this paint looks very questionable and can eventually cause troubles we remove it as much as
possible. After 10 baler hours we have a clean surface on which we can apply pounds of putty
and start shaping it. After all the old paint, primer and putty have been removed,
we degrease the surface and throw on kilogram after kilogram of putty.
So what is this done for? The fact is that the bodywork of the Volga even came out of
the factory not quite smooth, not to mention the traces of 60 years of service.
And besides, we have significantly changed the shape. Despite the fact that the splashboard
will eventually be brought to an ideal this won't work because all technologies are breached here.
And this quantity of putty will definitely make itself known. That is why we will make
these elements from fiberglass in the same way as we did the back of the Bugatti.
When we sharpen the splashboard, we don't forget to regularly estimate what kind of
hinged elements there are. A lot of attention should be paid to fitting. By the way it is
convenient to putty right on the spot. We glue the headlight with masking tape and putty right
on it then we will immediately have a guide to the beacon how many putties we need to put on
inflexible planes, some kind of bars.
You can even wrap the ruler which was used to putty in sandpaper,
it is also convenient to sharpen with it. We sharpen it for development.
As we said earlier we will pile kilograms of putty on the old panels from the Volga,
bring the shape to the ideal. In the future we will remove the matrices from them and make new
fiberglass parts. As a result we will get light, strong, beautiful body panels with the correct
geometry. But not everything is so simple and fast. And this work took more than one Andre month.
We continue to putty our sculpture. Alternate the direction of spreading the putty,
that is if we pulled one layer across the hood then we pull the next layer along the hood.
To cover these furrows which are formed during puttying. By the way a very cool putty with a
Initially it is blue and then, during the reaction, it changes its color. And it is very clearly seen
that there is no need to hurry. And it's very cool that it is clearly visible that you should
not start grinding the putty. And when the putty has already fully polymerized, the curing reaction
has ended, the blueness completely disappears. The blueness is completely gone. The curing
reaction is over it already becomes white, which means that you can already start grinding it.
When the hood is primed starting from it, we make the right gap.
That is, it's fit to the wings. With a grinder we remove everything extra we take off the wings
and then the exact same process as with the hood. Kilograms of primer, kilometers of sandpaper,
Andrade after Andrade, and coat. As a result, we have an ideal shape.
First of all we pulled the shape of the bumper from the 3D model, cut it into plates,
and cut these plates using a CNC made of expanded polystyrene.
Then we assembled the constructor, which was disassembled into 3D models and got a copy of
the Bugatti Chiron bumper, although made of foam. We put this foam mold into the body and with the
help of putty brought the mold to its proper condition. The next step was to put several
layers of glass wool on the putty mold and get a matrix, with which we will make a fiberglass
bumper. Or rather, Valera will make it. Actually, his entrance.
So, finally we filled up our bumper. Let's run through. We applied separation wax to the blank.
After that we applied this is how the final fill looks like, but that's not all. We have
to divide it all now. And I'll tell you it's not that easy. Meanwhile, Valera is busy with
the rear bumper. In the original Bugatti, there is such a wing which opens and changes its angle.
According to its shape we adjust the bumper. We cut off all the excess and attach it to the
main body. In fact it's not even a bumper it's part of the body since Bugatti has a one-piece
design. We did it separately because it's easier to make a part that way. Well now it remains to
combine it. Here we decided not to bother too much and just screw it on the screws. And for
reliability, tape it up, which is what you can see. Of course it's a joke. These are just temporary
holders for positioning. And the adhesive tape is needed so that the resin does not leak from
the joints since we will connect these two parts with glass wool. After the resin dried we began in
a hurry to prepare the whole body for rough painting. A couple of months ago I promised
the guys to roll out the intermediate result of Bugatti to a local car company called Location.
And of course according to the best traditions, we finished painting and assembling at night a
couple of hours before departure. The first thing they did was the main body. The old paint was
removed with a solvent. By the way these things perfectly played the role of coat. This is such a
thin layer of paint or special powder so that it can be seen where the surface has already been
sanded and where more work needs to be done. Also the coat penetrates into all the recesses,
flaws and traces of rough sandpaper. And after grinding these places stand out in contrast.
Unless of course the color of the coat is radically different from the color of the part.
That is why I apply a dark coat to a light detail. And then a couple of hours of grinding and we can
paint. By the way these particular shots were shot 15 hours before departure. So everyone who
was in the workshop had to pick up some sandpaper. Before painting the doors, hood and wings, we put
them on the body, checked that they more or less fit together and immediately attached the door
handle from the Volga. When all the body panels are fitted you can start painting. Andre conjured
a little here, added a little varnish to the ground. And looking ahead I will say that it gave
a very cool effect. Put the first layer of white soil. It will also be a substrate for red paint.
Once again I repeat, this is a rough painting, only to visually divide the car into two colors
as in the concept and get to the event. So the front part will be white. We will leave it just
to like, press the bell and of course subscribe.
