Pottery: Making a Lidded Jar / Ice Bucket

Making ceramics and glass
106 followers
Hey you guys, this is Janice Wilson-Hughes. We're here in my Evolution Stoneware Pottery studio today
for a very quick video on how to make lidded jars. Now my particular jar is going to be an ice bucket
because I've been issued a challenge and like I said this is going to be a quick video.
My challenge gave me only 24 hours to complete this and that was about 23 hours ago so I gotta
get moving. I hope this helps you guys. You can use this technique to make any kind of lidded jar
that you'd like to make and let's get started. I'm going to use about four pounds of white stoneware
clay to make the jar portion of my ice bucket. We'll get this clay centered. The reason I'm
making an ice bucket is that my goddaughter McKenna challenged me to do this to help raise
awareness about the disease ALS which is really a horrible horrible disease that has no cure.
Well McKenna's mom Rachel is my best friend and we met in fourth grade.
At that time she had already lost her mother to ALS. Really tough. Her grandmother also died of it
and very tragically recently her younger brother died of ALS. I also have another friend whose
father was taken by this disease and there was a co-worker of mine in my old job who died from it.
It's also called Lou Gehrig's disease and I hope that some of you guys will
take the time to support research for finding treatments and cure for this disease and also
to help donate to support people who are suffering from this terrible terrible disease already.
It's a huge drain.
So yesterday McKenna issued the ALS ice bucket challenge to me.
She herself was super brave along with her brother Keegan and her mom Rachel and they dumped
buckets of ice on themselves to raise awareness. Many other folks have done this too.
This is our way of getting the word out. I'm making an ice bucket here. I want to make sure
not to get the walls too thin at the top and before I raise the walls any farther
I'm going to compress and flatten the inside of this by pressing down
with my pagoda rib across the entire bottom of the pot. This will help keep it flat,
compress it to prevent cracking later. What I used to do that is a custom clay pottery tool that I
made. I call this particular tool a pagoda rib. If you would like to learn about how to make
your own custom clay pottery tools in detail you can find out all of that information
in my custom clay pottery tools DVD on Amazon. But now with the wheel going fairly slow I want
to start pulling these walls up. I'm going to use a sponge on the outside
to help even out the pressure that I'm applying. I usually only pull with a sponge when I'm working
with somewhere over three pounds of clay. This is a little over four I have here.
I'm trying to pull these up vertically. I don't want to thin it out too much at the very top
because I need to leave enough clay to press down a ledge or a gallery for
the lid to sit on. So as I get up here I don't want to thin it out too much.
Maybe compress it just a bit there. I'm in pretty good shape at this point
so I'm going to smooth out the side walls and then perhaps put a little bit of
shape into this. Again I'm going to use the pagoda rib. Use the long straight side
and add a little bit of moisture on the inside wall so that my hand slides instead of sticks.
So I'm just going to press out against the edge of this rib with my hand on the inside.
Really flatten out these walls. Get them nice and smooth and straight.
Now I'm going to use the pointed end and create a little undercut here at the base.
Smooth that out with a sponge. Now I want to go ahead and set the
ledge or the gallery here at the top for my lid to sit on. I'm just going to compress this clay
a little bit. Now I'm going to use this 90 degree angle here to just push down.
Now I have a really nice ledge right here for a lid to sit in. Provide plenty of support.
So with that set you can leave it like this or maybe do a little bit of shaping.
What I'm going to do is come in with this another custom clay pottery tool that I call a Picard
Rib. A little Star Trek reference there. You put a couple of sort of in out in grooves into this
pot. I'm going to start at the top and press in just like that. Put another inward groove at the
Now my gallery or ledge has popped up just a little so it's very easy to just push that back
just like that. So we've pretty much got our nice bucket here.
Try not to bash into things. Now all we need to do is create a rim to sit down into this ledge
and you can use one of these lid measurement tools. I'm not really sure what they're called.
One of these guys here. So what you want to do is take this
sort of innie section here and measure it up so that it's just as wide
as your pot there. The outer edge and then when we throw the lid we'll throw it so that it just
fits inside of this outie measurement end. So measured with this and then we'll measure
our lid to fit inside of here and we'll know that it will fit right on top of this pot just right.
So nice bucket in progress. Let's make the lid. I've got about a pound of clay here for the lid.
Use kind of a fun technique here to make this. Now probably have more clay than we need but
that's great because you can cut it down much better than too little bit of clay.
So I really want to flatten this down into a nice patty here. Check the width. That's about right,
right there. So now I'm going to bring some more of this clay back in toward the center.
This is a little tricky. I'm going to slow the wheel down some to do this.
I'm going to throw a big hollow knob right on top here
with that clay that I moved back in and a little bit of an air bubble
because I'm in a hurry to get this challenge done before the time limit.
Didn't wedge my clay very nicely so I'm closing that right in.
I have a handy dandy little sponge here. I can get the water out down inside there.
getting there. I can get this closed in. It'll be a lot easier to work with.
Okay so now we've got air trapped in here so it's a little more resilient at this point.
Oh I'm hungry. Okay a little bit of clay off this wonky point. There we go.
There. Oh I have a really nice knob. Lift this handle right off the pot.
Right off the ice bucket. Let me check my width again.
Just a teeny bit wide. So I'm going to curl the edge up just a little bit
with the pagoda rib here. You could trim off the edge if you prefer.
It's kind of fun to make a little lip on it though. There we go. That should be a perfect fit.
All right. Whoops. Let's go for a ride Mr. Sponge. All right.
There we go. And now I have to clean up which means um I think it's gonna be kind of a cold
process. I hope you guys have enjoyed the ice bucket challenge and I hope that you will help
support finding a cure for ALS. Okay McKenna I accepted your ice bucket challenge and after I
made my pottery ice bucket I realized what I'm really supposed to do is pour a bucket of ice
water over my head. So I'm going to use my clay water here. Kind of wishing I hadn't decided to
do this at this point. Looks kind of like milk. It's gonna be a mess. Okay here we go. ALS sucks.
