The Jacobsen and Polin Houses by John Lautner. Complete overview and walkthrough

Architecture and life
14 followers
#homedecor #workspace #design #architecture
Do you like what I am doing? Please support me in continuing making therse videos: / architecturevideos
Hello my dear audience. In this episode we're not gonna visit one but two houses by John Lautner.
The Jacobsen and Polen houses are placed next to each other. Constructed around the same time
and very similar yet not identical. So let's take a look inside. The houses are located
at the north side of the Hollywood Hills, overlooking the city of Burbank in the San
Fernando Valley. From above the hexagonal roof structures make the houses easily recognizable.
There's a curving road that goes up the hill and from there is a steep climbing driveway
that leads to the two houses. Once arrived at the end of the driveway we see the Polen house
at the left which has the carport attached to it. And when we turn to the right we see the
freestanding carport that belongs to the Jacobsen house which is located further up high on the hill.
The most recognizable similarity between the two houses is the use of the steel pillars at
the outside. Why choose Lautner for such an unusual construction? Well there were four reasons for it.
The first reason has everything to do with the landscape. Both houses offer a beautiful
view over the valley and it would be a waste to have walls with only a few windows. Therefore
the use of pillars derives the walls from having any supporting function and this allows large
horizontal windows over the entire length of the houses creating magnificent panoramas.
A second reason is that the internal walls don't have to support the roof and are not
longer necessary. This gives the freedom to create any kind of floor plan underneath
and you can have large open interiors. The third reason is that by building the pillars on the
slopes of the hill the construction is placed outside the house and no pillars inside are
needed. Therefore the internal living space is maximum used. The last reason is that the
steel trusses were very cost effective to make. They were pre-fabricated and then placed on
location. This is way more economic than building large foundations with walls on a challenging
hillside. Let's now take a look at how this roof construction was made. The first step was to place
concrete footings in the rising hillside. On these foundations steel pillars were placed. The steel
pillars support horizontal steel beams. For extra support the pillars have two sets of diagonal arms
at the backside. The arms are positioned v-shaped behind the pillars. The beams and pillars are
placed like a triangle from above. Because the pillars can be adapted in length they can suit
any elevation in the hillside. Over the triangle a pattern of steel beams was placed forming an
unusual hexagonal skeleton. To create maximum support diagonal arms connect the horizontal
beams with the top of the pillars. When the construction of the skeleton was finished
the roof made of timber was placed on the beams. There's also a third house by John Lautner that
had a similar roof supporting system. The Carling house which was built around the same time.
John Lautner never made the same house twice and despite the pillars being the same the Carling
house has a very different way in which the roof beams were placed. Creating a roof skeleton with a
very different pattern. The floors of both the Jacobsen and Polen houses were made of casted
concrete and they are completely independent from the roof. Concrete pillars above the ground level
make the floor horizontal despite the climbing hillside. While the roof makes both houses similar
it's the floor plate what makes the Jacobsen and Polen house different. When you look from above
you will see that the concrete floor of the Jacobsen house has a very different shape than
the Polen house which has a larger floor plate. The floor is not the only difference. Both houses
have a living space that extends beyond the edges of the hexagonal roof. The structure beyond the
roof edges is made of walls of timber and has a flat roof. These parts of the house are partly
built on a concrete base plate but also partly on hillside. Again the wings of the Jacobsen house
are very different than the wings of the Polen house. First we take a look at the floor plan
of the Jacobsen house. We remove the hexagonal roof to see which part of the living space
are placed underneath it and now we remove the other roof parts to see the rest of the living
space. We color the parts that are actually inside and see that a large part of the floor plate
is used for the balcony. When we decorate the drawing with furniture we see how compact the
house actually is. The many brown parts of the drawing are built-in closets that were constructed
with the house. Now we do the same with the Polen house. First the parts that are under the hexagon
then the other parts and we color the interior parts of the drawing. Important to notice is that
the Polen house has a carport attached to it while the Jacobsen house has a similar carport but then
separated. This makes the Polen house look way larger while it actually is only a little bit
bigger. Because of elevations in the hillside the carport and guest bedroom of the Polen house
are placed on a lower ground level than the rest of the house creating two different floor levels.
First we're going to walk through the Jacobsen house and we need to climb up the hill over a
stair to get access to it. Once you step through the front door you will notice something interesting.
Because the internal walls have no retaining function they don't go all the way up to the
ceiling. This allows sunlight to go over the walls to the backside of the house. Here you see a brick
wall which is the backside of a built-in couch which is located next to the central fireplace.
This is the only brick part of the house. In the same space is the dining area. A large tree
grows next to the windows and the vegetation seems to enter the house giving the house a warm and
organic feeling. In the right corner the floor plate expands from underneath the hexagonal roof
creating the possibility of having a glass ceiling like a conservatory that brings large
amounts of sunlight in the dining area. From the outside the house looks like it is floating
amongst the trees. The house has an open kitchen but this was not always the case. On old photographs
you see that the kitchen was first separated by a wall giving also the dining area a more enclosed
character. One of the owners later decided to break open the kitchen. Next to the fireplace is a den
that is used for watching television. It has a very private feeling and it keeps me surprising
anytime how good John Lodder could create places with different characters in the same space.
Because just a moment later we step back in the living room and we have a very transparent feeling.
Through the large glass sliding doors we step outside on the balcony. There's a small alley
between the backside of the house and a steeply rising hillside. This makes it possible to walk
behind the house. Here you see the windows of the secondary bedroom. The bathroom has a large
floor-to-ceiling window next to the shower. The master bedroom has doors that can swing
fully open. However this is a later addition and not an original design by John Lodder.
At the other side of the bed is a wall that forms the backside of the fireplace.
In front of the house is a terrace made of wooden risers placed on the hillside below the house.
From here you can have a good look at the construction of the concrete floor.
A final interesting detail is that this house was used as a film location in the 1998 movie
Twilight. In this movie the house is visited by Paul Newman. Okay for so far the Jacobson house.
Now we're gonna visit the Polin house. Next to the carport is a pathway under a porch.
We pass the guest bedroom and climb up the stair to the front door. From here we walk in the living
room. This wall doesn't go all the way up to the ceiling. This makes the living room look larger
because the perspective of the ceiling continues beyond the limitations of the living room.
The brick fireplace is half hexagonal which echoes the shape of the house.
Although the house is small the open plan and large windows make it look very large.
Because the concrete floor remains the same at the other side of the sliding doors,
the balcony looks like an extension of the living room. From the balcony we walk past the kitchen
and we go around the corner. From there you can step into the garden. In contrast with the Jacobson
house the hillside behind the Polin doesn't climb up that steep and this makes a large garden
possible. We return to the house and walk off the balcony one more time. We take a look at the den
which has the same kind of glass ceiling that we saw previously at the Jacobson house. The panoramic
windows and large amount of sunlight makes the den perhaps the most beautiful part of the house.
The living rooms of the Jacobson and Polin house are equal in size but the living room of the Polin
has more space because the kitchen and dining area are placed in separated spaces outside the
hexagonal roof. Here's the entrance to the kitchen. We take one look in the bedroom.
Just like the Jacobson house the Polin has many non-removable closets that were built in.
We end our tour with a view from below the hill. From here the houses look spectacular and
futuristic and it's unbelievable that these houses were built almost 80 years ago.
This was your tour guidance. Which one of the two houses is your favorite?
Let me know in the comments. Thank you for watching and I'll see you next time.
