3 Ways with 1 Craft Die! Techniques for Masculine Cards!

Paper Crafting with Lou Collins
723 followers
55 Video Views·Dec 16, 2024
hi everyone it's Lou Collins for craft
stash today I want to focus on one D and
show you three different ways of using
it this star shape here this from the
fixtures and fittings range from
textures it's absolutely perfect for all
of your masculine makes but it's also
ideal for Christmas as well which I'll
explain to you in a little while now
these are just some of the dieses that
are in the fixtures and fittings
collection just so you can have a glance
at them but you'll find them all linked
down below this is the D that we are
working on today it's a nice large D
you're going to need your larger for die
cutting machines for it we're going to
be cutting different materials and
creating totally different looks with it
so stay tuned for that so first I'm
going to show you how to put this
together in the basic way how it's
intended to be I've die cut this from
gold Mirror card you can see you've got
all the score lines there the rivet
marks as well that cross-hatching there
for that metal look it looks fantastic
now this can not only be used for your
uh birthday cards anniversary cards
Father's Day cards it can also be used
at Christmas time as well so it is a
really versatile die set so you can see
it's the one die and it cuts everything
out scores everything in one pass like I
say this is just some Mirror card here
uh I'm going to actually treat this I'm
going to do some decoration on it before
I fold it for you but folding is really
really simple you can see all the lines
we need to go along so all I'm going to
do and this is quite unusual on Mirror
card
is I'm going to actually do a little bit
of embossing now the idea is is that
some of this embossing will stick some
of it will kind of flake away a little
bit uh and it's not going to be a
perfect solid emboss or heat emboss over
the entire image so I'm going with a
distress oxide and I'm just going to
stamp over very roughly a few areas with
the oxide uh I'm not going for full
coverage here I'm just going for so DT
dab a few little areas that's all I'm
then going to remove this is just a
matte I played underneath to uh stop my
mat getting any messier than it already
is I've got a black embossing powder
here and I'm going to sprinkle this over
I'm not so worried about the tabs just
really the star shape here and the
reason I use a
water-based um ink there is because that
will kind of pull on the surface as well
so at this stage what I can do now is I
can just brush away any powder that I
don't want on there so on the tabs I can
remove that and if I've got any sharp
lines which I have a little bit just
from the edges of the pad and I can just
tap them with my finger this is just
going to kind of loosen up those lines a
little bit like
so there we go a little bit more around
there so really just distressing this
not giving it like I say full coverage
okay so I'm quite happy with how much
I've got there that's going to give that
a really really distressed metal look
I'm now going to pop this back into my
tub and heat set star now something we
need to bear in mind is that the heat
from the heat gun onto the metallic the
Mirror card can affect the foiled
surface of the card as well and you can
get some bubbling so you need to decide
whether you are happy for that bubbling
to happen to give you extra texture or
whether you'd rather keep a small a
smooth surface sorry so I'm going to
hold my heat gun a little bit further
away and allow for quite a slow melt of
the embossing powder um just so I don't
get too much direct heat onto the Mirror
card there now that powder has melted
I've really distressed the surface and
it will look fabulous when the star is
built which is what we're going to do
now so to build the star all we need to
do is fold along each of the lines so
there's a score line that runs from the
end of each point to uh the center of
the opposite Edge so let's just fold
that now because we've done our heat
embossing you might get a little bit of
cracking along each of those lines a
little bit more than you would normally
rather than just a fold but that's fine
because that cracking will potentially
could loosen some of the embossing
powder some bits might flake off but I
really like that effect I like the fact
that the embossing um is kind of
dimensional then you've got little bit
lifting here and there I just really
like it for distressed look and at the
moment I'm just doing Mountain folds on
each one of them so I've done a mountain
fold on the peak of each of the stars
now what I'm going to do is pinch into a
mountain fold one of the Peaks and just
gently fold into a valley the opposite
one so this can take a few minutes to
work around so you're just working each
of these smaller folds into a valley and
the ones next to it are into a peak and
we want to try and aim for the center
being a nice crisp kind of Point as well
as we're squeezing each one
in there we go so already we can start
to see our star coming to life now these
tabs on the edge can now be folded twice
so you've got the small tab there and
you've got the larger triangle they both
need to be folded into Mountain because
what's going to happen is this is going
to fold round and for the 3D star you're
going to fold that and tuck it under the
point bringing that into the
three-dimensional shape there so we're
going to do this on each of the points
there we go now your start is going to
hold its shape once you glue these tabs
on I like to use hot glue for Speed but
you can use something like red liner
tape if you prefer I'm just going to
start at any one of these points and I'm
going to run a small bit of hot glue
along the tab and quite quickly fold
that
over onto the underside of the point on
the other
side lining up the two
edges I always just pull away any excess
glue pinch it for a moment
and now we've created a point that is
holding its own shape and we can work
around all five of the points like
this and once all five of your points
are created you can then glue these five
points onto your project for a gorgeous
3D star that's been distressed you don't
have to do the distressing it can simply
be a gold star if you are doing this for
Christmas time but it's very easy to now
attach this
just with a few Blobs of
glue and that will hold its shape on a
card obviously you're going to want to
make something like a box for this but
you can also make threedimensional
stars even Bolder even more dimensional
simply by gluing two of these back to
back so that you can see all the way
around the star that's perfect if you
want to make a hanging for a Christmas
tree so there's one way of using this
star I'm going to now show you another
way this time I've cut three of the
Stars one from Orange card stock one
from navy blue and one from yellow I'm
snipping off the tabs so we're not
needing these tabs at all we're actually
going to end up with a flat star shape
that you could just adhere directly to
your project if you didn't want to go
with the dimension there we go so
there's a star you could use on your
project quite easily now you can also
paper piece this star if you wish to
give it some additional color and
shading so you could take two shades of
the same color so I could take a darker
orange or a light brown here and I could
actually cut out this triangle shape at
each of the hatched ones and replace
that or paper piece over a slightly
darker shade to give that that kind of
depth and dimension look without it
needing to be raised up off the card at
all but for this card I'm actually going
to do something very different so as you
can see here I've actually taken my
stars and I've trimmed them into diamond
shapes now you could also trim them into
the triangles that are there too and
make up patterns with those but I'm
going to make up a pattern with the
diamonds inside instead now I've laid
out on to my card as many as I can fit
on with the three stars that I cut in a
pretty random pattern here I haven't
followed any particular colors I've just
laid them trying not to get any um next
to each other too close that are the
same color uh I'm going to glue these
down trim off the edges and then those
Edge pieces hopefully will just fit in
the small bits that I'm
missing so for this I'm going to use my
creative Craft products book binding
glue I'm just going to space these out a
little now I've got my pattern I don't
want to lose
it and I'm going to just Place one in
the
center and from there I'm going to start
working
outwards there we go everything is glued
down this is onto a 6x6 in card base so
you can see I've got lots of excess and
overlap here so I'm just going to
carefully go along and trim off from the
underneath so I can clearly see where
the edge of the card
is and using these excess pieces I'm
just going to fill in the gaps that I
have
left now with the last space I actually
need the shorter point of an orange uh
diamond shape and I don't have that I
have the longer point or I have these
two but these are actually two opposite
halves so I'm going to cut down the
center of each of
them and then they should both fit side
by side to fill that space in there so
now I've created my own patterned paper
background uh you can do this in any
colors you like you could actually make
it so that the colors flow and fall
equally so you could do each row in a
separate color however you prefer but
it's just a really fun way and unusual
way of using that star DY for this third
technique I'm going to create a Shaker
card so I've actually cut the diey from
acetate I did use a metal shim in with
the cutting sandwich so that I got a
really clean cut against the acetate um
I've glued this together in the same way
as you saw with the uh gold star so
folded it in the same way I've glued the
tabs under now I have used a thin red
liner tape which you can just about make
out on the edges but it's the clearest
glue that I had that was going to uh not
really show too much now I'm going to go
on to a lightly patented paper and in
this case it's going to be a wood grain
style backing paper something like this
maybe some Stripes some polka dots
nothing that detracts too much from the
elements inside your Shaker but
something that's going to essentially
hide the glue um so that that can't be
seen too much so this is what I'm going
to be using as my backing but before I
do the backing I need to choose some
elements to go in the Shaker and I've
actually dug out all of my metal
embellishments so I have some really fun
items in here that will be perfect for
masculine cards so I have often gone to
the uh really cheap stores and purchased
things like tiny little washers that
come in bags of say 20 they are perfect
for going in shakers using on men's
cards things like this so I'm going to
dig out all of my little excess pieces
like so and pop those inside my star
which is essentially I've kind of got um
almost a little cup pair little pockets
so I'm going to place them in there
going to try and wiggle as much as I can
down to the bottom points of the star
there so they sit in there hopefully
they won't come out too much I'm going
to apply my glue to the Five Points this
is a hot glue so I need to act quite
quickly with this quickly turn this
over and press it down now I've left my
paper my patterned paper quite large and
I will trim around it because I know
that uh method of flipping the star over
with the embellishments in uh it can be
a little bit
unpredictable now I've also just used my
hot glue gun just on some of the corners
to ensure that the pieces don't fall out
and I've got a really fun Shaker card I
can now trim this down to size stick it
onto the front of a card onto the top of
a gift box whatever it may be and that
is something very different also using
that same dye so we've got the Shaker
we've got the threedimensional star uh
that's been distressed with mirror card
and of course we're using those points
to make our own pattern paper there's so
many different ways to use this one
particular die thank you everybody take
care I'll see you again very soon
