Raphael's technique - English

Art Exhibitions
6 followers
In his brief but remarkably intense life, Raffaele was active for only two decades,
but was perhaps the most complete of the great Renaissance painters.
His extraordinary talent allowed him to build on the accomplishments of his 15th century
predecessors, achieving a luminous, precise visual language and a complete control over
his means of expression, in particular the then new technique of oil painting which he perfected.
Through the process of scientifically reproducing one of Raffaele's paintings,
we attempted to understand the secrets of his practice and the steps involved in his work.
There has been growing interest in the ways these works were created.
This is motivated not simply by a curiosity to follow the artist in his work,
but by a realisation that technique strongly influences style.
Our understanding of Raffaele's creative journey and of the materials he used
relies on our interpretation of diagnostic studies of his paintings,
as well as on reading the treatises of his time.
However, with Raffaele, we also have some incomplete paintings,
which give us a window into his methods and procedure.
In fact, the Madonna del Baldacchino, which was left unfinished when the painter moved
from Florence to Rome, offers us a window into the practical steps
involved in Raffaele's creative process.
The most obviously unfinished element is the subject's skin.
When looking at the two carobs in the foreground,
it is extremely easy to see the drawing that lies under those initial layers of colour,
which are made up of lead white and burnt lake, mixed with boiled linseed oil.
Similarly, in the Madonna Esterasi, painted around 1508,
the underlying drawing shows under the figure's monochrome base layers,
because of the extremely light touch used on the subject's skins,
which are made up of only a few coats.
It is widely recognised that the drawing phase is particularly important to Raffaele's
creative process, as is demonstrated by the close correspondence
between his drawings and his finished paintings.
In fact, starting with his earliest pieces,
Raffaele created many remarkable series of drawings in the planning and preparation of his paintings.
He would normally start with some initial sketches, aimed at putting his ideas to paper.
He then followed these with further sketches and drawings,
working out both the entire composition and particular details.
Raffaele would thus combine elements he had practised separately,
although he might still make further corrections as he worked on the final painting.
In fact, he did not consider his line drawings to be works of art in themselves,
but rather saw them as being instrumental to the realisation of his paintings.
His Palabaione went through a long and complicated development,
which is documented by an extraordinary series of sketches and studies.
The subject of the entire work gradually changed from a lamentation
to the final image of the deposition of Christ.
It is believed that joining together two different cartoons
caused a difference in proportions between the figures on the left
and centre of the composition, and those on the right.
Sketches and studies allowed the artist to evaluate each figure,
object or other detail, to then recombine these into a more complex composition,
the modello.
This was the final preparatory drawing,
which was meant to be transferred onto a new support
through the use of a different artistic technique.
For most of his paintings, Raphael used panels made up of poplar wood,
or, less frequently, linden wood.
The panels are held together with calcium cassinate and wooden slats.
These are inserted perpendicularly to the panels and lock into a trapeze-shaped track.
There are also three series of double dovetail joins, placed along the same lines.
The preparation mixture for the wooden panels is made up of calcinated plaster,
plaster of Paris, mixed with animal glue.
In some cases, smaller amounts of fat-based binders
are found in conjunction with the animal glue.
On top of this preparation, many paintings have a light film of pure animal glue,
which was used mostly for physical reasons,
allowing the brushstrokes to flow better,
limiting the absorbing power of the preparation layer
and improving the texture of the preparation.
Through the use of infrared reflectography,
we can now follow the evolution of the images drawn by the artist onto the wooden panels,
which were then hidden by his brushstrokes.
Research has revealed very detailed preparatory drawings,
which could take many different forms,
both in the planning and preparation of the composition,
and in the ways in which this would be scaled up and transferred to the final medium,
using methods such as tracing,
pouncing, certainly the most common method at the time,
copying onto a squared cartoon,
and finally copying freehand,
which was often used alongside other methods to complete the tracing or copying.
The drawing implements used could range from charcoal to pen
and also included the use of metal-pointed or other fine dry-pointed stylos.
Raphael, in fact, draws the architecture,
along with other geometric elements such as the throne,
through simple but functional grids of incisions,
sometimes created with the help of a compass.
Most often, however, we find lines made by dipping a paintbrush
into heavily diluted black pigment,
creating clear, precise lines to delineate the main figures.
This drawing element is sometimes accompanied by hatching.
These elements in the underdrawing begin to define the shading, chiaroscuro,
before the first coat of paint is even applied,
creating lighter and darker areas through the use of charcoal or a paintbrush.
In the drawing phase, Raphael obtains a volumetric effect
by adding watercolour or by further defining the chiaroscuro through hatching.
Using oil paint on top of these figures,
which have already been rendered volumetrically,
then allows the painter to merge the effects of different layers
through a mixture of blending and transparency.
On top of the initial drawing,
Raphael lays a thin film, in primitura,
composed of lead white mixed with a binder based on boiled linseed oil.
In terms of its function, this wide, semi-transparent base
serves the same function as a priming layer.
In fact, in practical terms, this is a final addition to the preparation,
which gives the artist a more suitable surface for colour painting,
as well as reducing the time needed for further coats of paint to dry.
In terms of the work's composition, however,
this priming film can be taken as part of the painting phase.
The mixture, which is laid on top of the underdrawing,
features the same binder utilised in other paints
and uses lead white as its main pigment.
Top of the lead white priming layer,
before he began to paint the figures and settings,
Raphael would add local chromatic backgrounds,
based on his needs for different parts of the composition,
thus obtaining another semi-transparent film
which blended with the colour of the primer below.
In fact, in the 1500s,
artists like Raphael began to experiment
in different ways and at different times
with imprimature that did not match the final desired colour,
but rather were painted in tones
that would contribute an iridescent effect to the final painting,
with a higher sense of chromatic contrast,
and even, by varying the levels of intensity,
help to delineate shadows.
Among the paintings analysed,
we find examples of this practice
where red drapes or clothes are painted on top of a green background,
or, conversely,
where green fabrics lay on top of red or black priming layers.
A priming layer, based on red lake,
can often be seen under ultramarine blue fabrics,
which allows the artist to obtain a purer
and more saturated shade of light blue.
Meanwhile, a light blue background
is used for the Madonna dell'Impannata,
allowing the artist to define the shadows
on the attendant saint's yellow garment.
The sky and light blue drapes in many other paintings
are instead obtained by overlaying two layers of blue,
combining lead white first with azurite
and then with ultramarine blue for the top layer.
The main painting phase involves the laying down of
paint used a corpo,
pure pigment or pigment mixed with lead white,
on top of which are added
one or more glazes using the same pigment.
Details in the subject's garments
are rendered using a white-rich glaze,
while highlights on fabrics are created with longer,
thicker strokes of lead white.
Deeper shadows, already suggested by the underdrawing,
are further defined using thick layers of pigment
used unmixed or with a small amount of charcoal black,
which contains significant amounts of glass powder.
Also found in priming layers across all of Raphael's paintings,
glass powder is used to different effects
depending on the layer in which it is mixed.
Raphael's paintings often feature thicker layers of pigment
at the meeting points of different colours,
thus avoiding any overlapping
along the edges of different compositional elements.
Thus, adding glass,
as well as serving as a filler,
adding volume to the brush stroke,
also adds depth and transparency
to the layers in which it is mixed.
Moreover, glass powder serves as a chemical catalyst,
promoting the polymerization of oil-based binders.
Raphael, in fact, defied the rule of grasso su magro,
whereby oil-based layers would be applied last,
and instead mixed his initial oil-based layers
with substances that would have a drying effect,
such as lead white,
lead or tin yellow,
and indeed, glass powder.
In his mature phase,
the painter gradually abandoned shading in the underdrawing phase,
instead giving a chiaroscuro effect
on his subject's skins and garments
by using dark outer glazes of carbon black
set against white highlights,
which with time became more and more robust.
These highlights are created with broad brush strokes
or by applying colour with the tip of a paintbrush,
but are always in relief.
The subject's flesh often takes on a uniform appearance,
obtained through fluid, homogeneous brush strokes,
which achieve a different effect from the reliefs
seen in other parts of the painting,
where denser paints are laid using harder brushes.
Generally, skin tones would start with duller tones,
which would then be gradually enlivened as the artist went on.
The final effect is obtained by laying down two layers.
A lighter inner layer,
made up of lead white, yellow ochre,
vermilion and sometimes burnt lake,
and a darker outer layer,
where a small amount of carbon black is added to these pigments.
At times, as with the Madonna della Seggiola,
both layers can be considered a corpo,
because of their thickness
and the ways in which the binders are mixed to the pigment.
However, this is rare for the outermost layer,
which is instead usually created through glazing.
In other words, Raphael would usually finish skin
using semi-transparent layers.
These finishing layers often contain a high percentage of binders
and use transparent varnishes,
nero di lampada, a type of carbon black,
and lead white.
Earth tones and ochre pigments
are also used on the subject's hair.
Choosing only a few materials
and laying them out next to,
on top of and mixed through each other,
achieves a transparent,
bright and luminous style of painting.
The carbon black glazings,
used to shade darker areas,
although transparent,
dim the brilliance of the paint.
This is consistent with Raphael's overall technique,
recalling the initial definition of volume in the underdrawing,
which was obtained with hatching rather than colour.
Thus, laying down several layers of opaque and transparent colour
allows the artist to complete his depiction
of the volumes he has already modelled.
Treatises and other works from Raphael's time
document the common practice
of applying transparent glazes to finish a painting
and obtain a brighter effect,
and this practice can be seen in many of Raphael's paintings.
Light-coloured glazes would be laid on top of
emphasising the chiaroscuro and the iridescent effect
that had already been obtained in previous phases of work.
In this phase,
an azurite glaze on top of red lake
allows the artist to obtain purple tones.
A series of glazes based on lake or ochre yellow,
interspersed with lead-white highlights,
create the thin veil resting on the Madonna's red garment.
Finally, landscapes,
which are often absent or barely suggested in the underdrawing,
are set up with a white primer
and then also completed with a series of accorpo layers and glazings.
