7 [TRIED & TRUE] Throwback Crafting Techniques You Forgot Existed!

Makers Gonna Learn
745 followers
3 Video Views·Dec 9, 2024
Listen, my friends, I've been crafting for over 14 years.
In today's video, I'm gonna pull out seven
of my favorite hidden secrets about crafting
that I think you don't know about yet.
Are you guys ready?
These are gonna blow you away.
So let me share with you all the fun.
All right, hack number one,
shout out to Robin Carden of My Pink Stamper.
Courtney and I learned this in 2010,
and this is called the cheater method
for when you're making cards.
This is the easiest bow that you can put on any card.
It is super fun, all right?
You'll wanna take your card base.
You wanna get just a little bit extra ribbon,
and I like to take my A2G gun, my adhesive runner.
You could even use masking tape, y'all,
literally masking tape.
Put it down, right like so,
and then once it's down, you're gonna take it,
and you're just going to wanna line it out
wherever you wanna put it, just like so.
We're putting a little cheater method.
She always called this the cheater method.
So after your ribbon's on here, right?
Looks really good.
Now what you're gonna do is get about six inches of ribbon,
cut it, like to always angle it,
and then you pick where you want your bow.
Now, sometimes when you're making a card like this,
you know, you wanna put it up here.
Sometimes I like to do, you know, a card like this.
So you just wanna decide where you want it.
I would normally recommend in one of the corners, okay?
So we're gonna take it under, just loop it under,
and then tie a knot, and this, y'all,
will make it look like you know how to tie up
a legit bow on a card,
but it's really just wrapped over,
and then knot it, just like so.
And now you can cut the angles.
Super simple.
You can tie it real tight, and then cut the other one.
This is such an easy way to elevate the card
without having to do much work at all.
And then boom!
You have your little cheater method on your card.
Now listen, you guys know I started off as a paper crafter,
so I wanna make sure you know all my paper crafting hacks.
Furthermore, you need to make sure,
if you go ink the edges like I'm teaching today,
that you get the Tim Holtz ink pads.
They will last you a lifetime, and I can't find mine,
but the office has some other ink pads from Hobby Lobby.
So this will do, but just know I prefer the Tim Holtz, okay?
So you open it up, and you can sometimes
get a little dauber, so you can really ink the edges.
It's great if you're gonna do scallop circles,
things like that, but what you can also do
is take the literal ink pad,
and you can just go over the edges here.
And this will just elevate it,
and make it look just a little bit more magical.
So see, you're just inking,
and a lot of us that aren't traditional paper crafters
would never think about this,
because to find all of these hacks,
you have to really go all in on paper crafting.
And I know a lot of the people here
are kind of newbies to paper crafting,
but look, it just looks so good
when you do just a little inking around the edges.
I mean, it totally elevates it,
and then you can add your bow back from the other hack.
Boom, you have now inked your edges of your card,
which has been fantastic.
Okay, I know you wanna be able
to elevate your cricket game, am I right?
Well, you've got to be sure to use the registration marks
when you're using multi-layer vinyl.
So I went ahead and picked up
these three different colors here.
So you can see the dark pink, the purple,
and the little peachy color.
So we've got our boxes up here, but look what happens.
We've got three more layers.
The registration box is magical.
The way to make this appropriate
is you have to get enough little boxes
for all the colors of your layer, all right?
And then before you ungroup it and move it around,
you have to place them all together,
and then you attach just based on the color.
So for example, you attach your square to the peach color,
then your square to the purple color, right?
And then they all have its own layer,
and it'll look something like this.
So notice it doesn't let Cricut
automatically resize it to save vinyl.
Technically, this process, you do waste some vinyl,
but it's totally fine
because it's saving you so much headache.
So that's why you must attach the square to the layer, right?
So that it doesn't just recompress it to cut really small.
So this is what it should look like,
and you just want to place them.
You have to have enough squares
for as many color layers, right, number one.
Number two, you have to color sync these squares
to all your colors.
And lastly, you attach.
It should look like this, all right?
That's half the battle, more so in design space.
A lot of people get tripped up, you know,
rinsing, repeating this to pick them up, all right?
So all we do, we've already done three.
We can varnish, we can grab a tool or anything like that.
We peel off the backing, like so.
We come over to another layer,
and all I have to worry about is lining up my squares.
I line it up.
I don't even have to think, really.
And then just like so,
we just keep focusing only on the squares.
We never have to worry about anything else.
And you can just varnish it all down.
And see, we've lifted this one up.
Now we'll rinse and repeat for our blue layer.
So we can just go ahead and place this here.
You know that your square will always be
in the top left corner.
So again, you just focus on the square lining up.
And I just promise you guys that this is how the file looks.
It's not me not lining it up.
This is how the file looks.
So you'll varnish, varnish, peel it back.
Beautiful.
And like so, just rinse and repeat.
And it just allows you to have stress-free crafting
when it comes to a multi-layer project.
And if you're like me, it's very, very needed.
And then look, you've got this, varnish, varnish.
And now you've been able to pick up all of your layers.
And what you would do is take your pair of scissors
and just cut off the registration boxes,
because obviously you don't want that on your project.
And look, now you have your file ready to go
on your mirror, on your wall,
wherever you put your vinyl decal is ready to go,
and you can apply it.
If you're not ready to use it day of,
just grab a piece of tape, transfer tape backing,
and apply it back on, and you'll be good to go.
All right, my friends, I love cutting felt with my Cricut,
both with a fine point blade that's bonded felt.
I also love using the rotary blade.
But you want to know what I don't love?
When my mat gets destroyed after one piece of felt.
All right, so here's the hack that I've gotta put you onto.
Grab a piece of transfer tape, all right?
Just don't even question me.
Grab a piece of transfer tape, peel,
cut it to the size of your felt,
apply it to the back of the felt, all right?
Just like this, apply it to the back, right here.
And then look what we're gonna do.
We are going to actually apply the felt transfer tape side
down onto the mat, and then guess what this does?
It's going to allow us to still have great stickiness
to the mat, it's flawless, but guess what it doesn't do?
It doesn't make it where we have to clean our mat
right away and damage it.
Because I know you're like me, time is money.
I wanna be spending time crafting,
not cleaning Cricut mats.
So look, I just trimmed some excess off,
I'm laying it down right here, boom.
What I also like to do is sometimes like burnish it down,
just to make sure it's down really well.
And then after you burnish,
just make sure everything's down,
you now will be able to cut it out.
And then guess what?
When you're done, you just peel it up and boom,
no damage whatsoever done to your Cricut mat.
It's one of my favorite hacks for working with felt.
And if you work with felt a lot,
you'll run through your Cricut mats
and we don't wanna let that happen.
So be sure to try this your next felt project.
How many of you love to make these custom doormats?
If you're anything like me,
you wanna get the great results the first time around.
Now, one of my favorite ways to do this
is with freezer paper and heating it up
with the freezer paper liner and the EasyPress.
But did you know there's another way
where you can use up all of this vinyl
and all the random colors you have?
Yes, all you do, cut your stencil out like you normally would
but what I want you to do is I want you to apply it down.
Now, I'm just gonna do this to kinda show you a demo
cause I have this lovely doormat I've already made
but I wanna demo it on here.
So you peel up your stencil.
You may need transfer tape
if you have a really complex design.
This is just a star.
So you would apply it down onto the mat
and then here's what I want you to do.
I want you to burnish it down, all right?
Make sure it's stuck.
And then from here, guess what we're gonna do?
We're gonna grab a heat gun
and the heat gun is gonna heat up the adhesive
to adhere even better onto the mat.
So look, we're just gonna heat this whole area
up a little bit and it's gonna activate the adhesive
and it's gonna allow it to adhere even deeper
into the particles of the mat
because this is a really textured surface.
So to get these really crisp and clean edges,
it's just more difficult.
So that's why you need a little heat.
My tip is if you are using a really strong
and powerful heat gun to kinda stay six to eight inches away
but if you're using a hairdryer, you can get a lot closer
but both will work.
It just takes a little bit more time.
And now that it's adhered down super well,
what you can do is come in with your traditional paint
and do your dabbing motions with a foam brush,
with a paint brush, and you'll notice that your edges
and your lines are super, super crispier
compared to if you used no heat to warm it up.
All right, my friends, if you are ever trying
to apply vinyl to a round surface like a mug,
like a ornament, you need to know this hack.
You've got to cut slits in the transfer tape, all right?
It will help it apply so much better.
So I just cut, come in here and cut these slits
just like so and what will happen is
after you go around the entire design
and notice if it's like, like there's space,
I go as close as I can with the slits
so that it can apply the best possible, okay?
Just like so, love it.
Now, what we're gonna do is come over to the back
and we're going to peel it up.
And then as you start peeling it up,
you'll see it starts coming off, beautiful.
And then here's what you do.
You wanna take your glass.
Now, sometimes you can place it into something.
We like to use foam, we like to use leftover things.
I also like to put it on, this is a bonus hack.
I like to use a brayer like this and lay it.
Look at that, it will just lay on there.
It has the two slits.
These burnishing tools are super, super handy
to be able to hold your glass mug.
And then look, we're gonna be able to take this
because of our burnishing tool, it will stay in position.
I think this is the most important part of the hack.
Now, you get to use your finger
and you just slowly go through applying it down.
Now, another hack, second most important.
First is the burnishing tool.
Second is to make sure you've cleaned your surface
with rubbing alcohol, okay?
Very, very important.
And lastly, believe it or not, is cutting the slits.
You've gotta do the prep
so that this will go on super, super well.
And as you can see,
the vinyl has all adhered down really well.
What actually tries to resist and bubble up
is the transfer tape.
So once it does that,
you know, the slits will just let it
kind of lay down wherever it wants.
You can come in and peel all this up just like so.
How about that?
A cup of cheer, imagine your hot chocolate
or whatever you love to make this holiday season
in your little glass mug.
I mean, I need a latte in here right away, all right?
I love it, from the Dollar Tree, y'all.
All right, my friends, when was the last time
you cut something super, super intricate
and then you're like, actually, I can't weave this at all?
Let me tell you, you need to grab your baby powder, all right?
I have three babies.
I've never used baby powder,
so you may have to get some at the Dollar Tree,
but apparently it's really good.
This one is cornstarch baby powder.
Can someone in the comments let me know
what you used to do with this?
Because again, race three kids never used it,
but we're gonna use it for our crafting today.
So if you have a darker color, use baby powder.
If you have a lighter color vinyl,
you need to use cocoa powder, okay?
And you know I bake a lot, so I got that on deck.
But all you wanna do is take some here.
Y'all, it is very minimal you need
because look what we're gonna do.
After we get it, just like so, sprinkle, sprinkle,
we're gonna take our finger
and we're gonna rub it in just like so.
And then all of a sudden,
you will be able to actually read your design
and see the outline so that, guess what?
After we brush it away, boom, look at this.
After you are able to add the baby powder
and then kind of wop the excess away,
you can see this so much better.
I can actually read Santa's eggnog and like really see it.
So then I can come in with my weeding tool,
weed it really, really well
and make sure I don't have a craft fail.
Because again, if I have a craft fail,
I'd have to waste another piece of vinyl,
the time to cut it, so on and so forth.
But the baby powder saves us every single time.
And again, for white vinyl, other colors like that,
your cocoa powder will help a ton.
Guys, I have to tell you my absolute favorite one
from this video is my cheater method for card makers.
If you're on the fence about being a card maker
and making with more paper crafts, y'all, it is so much fun.
But I wanna hear from you, which one is your favorite?
Leave me a comment down below.
I cannot wait to see which one was your favorite,
which one had you forgot about,
which one have you never heard of?
Leave me a comment down below.
If you loved the video, hit the subscribe button.
If you're not already, give the video a thumbs up
and I'll see you back here real soon for another video.
But if you wanna keep on in watching,
go ahead and see this video right here.
And as always, check out makersgonnalearn.com,
join the membership linked right down below.
See you in the next one.
Bye guys.
