New RAM Key Fob -- How to Replace Battery

Replacing The Battery In The Key Fob
The replacement battery model is one CR2450 battery.
My Amazon affiliate link to this battery: https://amzn.to/4fJiBuF

1. Remove the emergency key by pushing the
emergency key release button on the side of
the key fob, and pulling the emergency key out with
your other hand.

2. Hold the key fob with the button side facing down,
and locate the small rectangular gap on the left
side between the housing and the back cover of
the key fob. Use a small screwdriver (or similar
tool) to pry open the left side of the fob cover while
applying pressure until the cover snaps open.

3. Next, locate the gap on the right side of the key
fob, which is positioned farther to the edge than
the left side gap. Pry open the right side, and
remove the back cover.

4. Remove the battery by using your thumb to slide
the battery downward and back toward the key
ring.

5. Replace the battery by using your thumb to push
down and slide the battery under the small lip on
the top edge of the opening.

6. To assemble the key fob case, line up the top edge
of the back cover with the top of the fob, and
press the edges into the interlocking hinges until
all edges snap together with no large visual gaps.

7. Reinsert the emergency key until it locks into
place.