ANTIQUE SWORD - A richly decorated German Imperial LION HEAD SABRE

Rune Slicer
2 followers
35 Video Views·Dec 6, 2024
How would you design a sword to be flashy and communicate martial power?
By now we should be pretty familiar with this.
This is the Lionhead Saber that we've seen already in an unboxing video and then in the
tip straightening video I did some time ago.
So I figured today it would be maybe a good idea to show it in detail.
And actually there are quite a few details to look at because it's a rather richly decorated
sword, especially on the hilt, and hopefully communicate some useful information, which
may not be much because this model of sword is quite hard to pinpoint.
It's one of the easiest to recognize, it's usually a German sword, although we're gonna
get into that, there are some variants, some other nationality variants as well, but it's
often a German sword, you recognize it really easily from the Lionhead pommel, from the
fact that it has glass or stones or it could even be precious rubies in the eyes.
It's usually a not very curved saber and often when handling it you can really tell that
its purpose is more for show and parade and let's say high uniform, I suppose, more than
for combat.
So it may be easy to recognize, but on the flip side, as easy as it is to recognize,
it's really difficult to pinpoint what exactly it is.
And the main reason is that there are countless variants of this sword, and when I say variants
I don't mean like official variants, like, I don't know, as you would have perhaps different
versions of the IOB 1889 for instance, but a lot of actual custom-made swords.
So as a, I assume, as a non-combat weapon and one that was used more to show off, it
kind of naturally, the natural consequence is that a lot of officers would have designed
their own.
And by design I don't mean just small details or engravings, you have hilts that are different
sizes compared to the official original one, the decorations on the backstrap, every little
detail is often personalized in a way that makes it almost impossible, at least as far
as I've been able to, to determine, let's say, patterns, typologies of this kind of
sword.
So I mentioned it has a lot of variety, and this comes both through the creativity of
the officers that used it, of course, but also I think through the fact that this sword
actually had a decent run, so the earliest I've seen appearing are perhaps post-Franco-Prussian
War, I think the earliest I've seen are like from the 1880s, but it's possible that they
already existed earlier, but then they run all the way to the end of World War II, basically.
So that's about 80 years, 70 to 80 years of active use, so this means that you will have
different styles and different types, and while I wouldn't place a bet on these characteristics
enabling you to really date it, I have to say that certain characteristics do seem to
change over time.
One very clear one, for example, is the grip, which in the older versions is usually in
chagrin or fish skin, but in more modern versions, and by modern I mean like from the 20s perhaps
to the end of World War II, are often in bakelite, anyway, some kind of synthetic material.
You still do find chagrin ones even through the 20s, but let's say the appearance of a
synthetic grip kind of easily dates it to the later phase of this kind of sword's existence.
You also do see some differences in patterns of decoration, we're going to look in detail
at the rather elaborate backstrap, I'll show you just quickly here.
So there are some pattern differences you see between, let's say, versions from the
1940s, but I would be very cautious about using these as an absolute way to date a sword,
so I would be cautious in general about dating this sword specifically, for example.
Another big difference you'll see is in the lion head, some are more realistic, some are
more, you could say, dynamic in a sense, it's almost as if the lion is really biting onto
the knuckle guard, and some are more stylized, in some cases the snout will be kind of cut off,
so we'll see all that later as well.
So the lion head has many different variations, again, this is more, I think, to the taste
of the buyer in the sense that you may not like a certain kind of style versus another.
And, of course, when it comes to blades, we know that German officers used to customize
their weapons a lot, so you have, in many cases, you'll have these kind of thinner saber blades,
so here we're talking maybe a couple of centimeters max, and rather flexible, this isn't a sword
that you would use in heavy combat, but occasionally you do see versions with a broader,
heavier blade that might instead have been carried, let's say, for potential use.
But let me try and keep the video less of a random rant and more structured.
So there are a few elements where you will see a lot of difference on these kinds of swords.
We already mentioned the lion head pommel and we mentioned the grip, which changes a lot.
There are, we did mention differences in the decorations, but I also want to quickly just
go through how different these can be.
So you'll see striking differences on the pattern on the backstrap, for example.
You'll see differences in this ring here on the grip.
You'll see differences in the decoration on these medals.
If you see here, this one is empty, for example.
This can often have regimental kind of symbology, so you may have cannons in the case of artillery,
two crossed sabers in the case of cavalry, for instance.
So sometimes it can be useful to determine what a sword is, but otherwise not.
And the decoration difference goes as much in detail as to,
you have variants even on the kind of engravings you have on the side here of the knuckle guard,
and the knuckle guard as well.
So this one you'll see is actually rather plain,
but you do have some versions that are heavily decorated even on the front of the knuckle guard.
In any case, all of the swords I've seen of this typology have a very richly decorated hilt.
This is kind of part of the style of the hilt together with the red or green and red eyes.
So this is a characteristic you'll find on each one of them, no matter the variations.
I mentioned that this sword is easily recognizable as German,
but that is really not always the case,
as is the case with many German sword models from the late 19th to early 20th centuries.
A lot of these were exported and made in different variants for armies of different nations.
Specifically, you will find some Venezuelan swords of this exact kind of model,
you will find some Ottoman, Turkish swords that are again this kind of model,
and you'll find some Dutch swords that are very similar as well.
And perhaps to kind of confirm the non-battle purpose of these swords,
the Dutch version is called a Vandal Sabel,
which would kind of translate, if I'm not mistaken, to like a walking sword,
like a stroll sword in a sense.
So yes, so it's not a battle sword.
It wouldn't be a Felddegen, to be clear.
And that is kind of all I have to say about these swords, because...
And that is kind of all I have to say about these swords,
because their long life means that they kind of went through a bunch of different governments.
They went through Imperial Germany, the Weimar Republic, and obviously the Third Reich.
So they obviously didn't think it very important to change regulations or patterns around these
swords. These kind of just flowed with the different German governments over the course
of 80 years. That's kind of it as a general introduction.
Okay, time for the close-up on this beautifully elaborate sword.
So the first thing I want to mention about this one specifically
is that unfortunately it is rather loose in the hilt.
So it's not super dramatic, but you'll see there's definitely some play there.
This may be a candidate for a re-peening job or just a tightening,
because as you can see, the difference between the iron on the peen and the brass here is actually
striking enough that I don't feel like a couple of taps on the iron would kind of ruin the
detonation as it would perhaps if it was steel that had aged consistently.
But again, this is just something I'm thinking about. It's not something I'm necessarily going
to do. So let me know what you think. So we'll start with the hilt, because it's the most
striking part of the sword, I would say. What you notice at a first glance, I would say,
is the typical stirrup hilt. This is reminiscent in a way of a Bucher or of a 1796 light cavalry
saber. It's just a more exaggerated version of it. So everything within it seems to be
kind of brought to the extreme, in a sense. The belly here seems to me to be wider and rounder.
The joint between the crossguard and the knuckle guard is very elaborate. You can see here with
this little twirl. The langets are richly decorated, of course. And there's this amazing
lion head pommel. And also the belly here on the grip is actually very, very pronounced,
to the point that it's not uncomfortable to hold, but it really doesn't feel very natural,
I would say. You can kind of get the feeling that this may be more of an aesthetic choice
than a practical one. Speaking of the hilt, of course, this one, as many others, as most others
actually have seen of this kind, is gilt. So you'll see it's still very visible. You can
actually see it here on the crossguard and on this Medusa head, that it's actually still very
heavily gilded. So this is really cool, because not many of my swords are in this good condition,
at least in terms of the gilding. I mentioned most of these are gilt, and that is because there are
some models that actually have a steel hilt. So not all of them necessarily are brass,
as this one would be. So I did mention a Medusa head, so I want to get that out of the way right
away. We can see it decorated here. I've seen a couple of these, not many whatsoever. And honestly,
I don't know what this symbology refers to. I've also seen a question whether this even is a Medusa
head. To me, the way it looks, the appearance of it is very clearly a Medusa head, even if you don't
see clear snake heads coming out of her head. I don't know what else it could be in terms of
iconography. I also found somewhere an indication that Medusa heads were typical, or might be typical
of Turkish or Persian blades, swords, sorry. Indeed, Turkey seems to have a lot of Medusa heads that are
part of the columns or remains of ancient antiquity. And they actually look quite similar
to this, so this makes me think it is a Medusa head. However, this specific sword is definitely
not Turkish because of what's written on the blade, which we'll see in just a second. However,
this doesn't necessarily deny that other versions of Medusa heads like this may be an indication of
Ottoman provenance of a sword. I don't know, though. This is something you need to do your
research on. Now, looking at the crossguard, I want to point out, because here you really see it
well, the minute and intricate detail of this hilt. So, you see these small cross decorations.
Each one has a dot or two dots in each one of the triangular sections. You also see here,
it's really interesting how it kind of expands. You have this cut bit going into the head of this
panther, tiger, I'm not sure. Well, this is another interesting point to mention. The quillen
is also decorated very richly. You'll see it has this kind of tiger head, I would say.
Very stylized, but also very beautiful. This is fairly common. Again, it comes in different
qualities of manufacturing, I would say, but it's a fairly common characteristic.
As I was mentioning, you have this, the connection between the crossguard and the knuckle bow is a,
this rather beautiful little loop. And in this case, for this sword specifically, you'll see
that the decoration of the knuckle guard stops here at this loop. The knuckle guard itself is
then very basic, up to where it meets the teeth of the lion on the pommel. This is a beautiful
characteristic, and it's especially beautiful on this sword, or swords like this, in my opinion,
because the ones with the cut snout, let's say, with the stylized snout, it just kind of,
it branches into, it unites with the mouth of the lion, but it's not as evident as it is here.
Here you really see the teeth kind of grabbing on to the knuckle guard, and the knuckle guard
kind of really fitting into the mouth. You can almost, almost, I won't say realistic, of course,
because golden head lions are not that, but it's as realistic as you can get, I would say.
This one, I'm lucky enough that it still has both of its eyes. These eyes are often glass,
I think, especially on the newer versions. They can even be some kind of red semi-precious stone,
I suppose, but it's not unheard of, of certain of these swords, especially the fancier ones,
having actual rubies. So, if you have one, make sure you don't just throw it away or lose the
eyes, because, well, apart from the integrity of the sword, you might be losing some cool
precious stone. You can actually see the fur on the lion. It's slightly, you have these little
cuts along the lion's mouth and face, so even the fur is stylized quite beautifully, and the mane
is semi-realistic, I would say, very intricate, and it kind of, well, here you see the pinwheel,
which we already saw earlier, and then the mane kind of gives way to this typically 19th century
kind of floral geometric decoration. So, you have these flowers here, these seem like crowns,
and then some geometric patterns. Again, together with the Medusa that I was talking about before,
and the lion's head, as a way to potentially recognize or date these swords, these wings,
let's say, can help, or the pattern you see on the back strap can help, or even the pattern you see
here can help you identify or kind of place it a little in time. So, according to the research I've
done so far, the closest in age to this sword, if I look at all the characteristics I've mentioned,
seem to be swords from the late 1800s, so perhaps on the earlier side of this kind of model's
life cycle. Closer to the 1890s, actually, than to the 1880s, because there are some differences,
at least in the examples I've been able to look at, but it definitely does not seem to be the case
that this would be a sword from the 1900s. You also have some significant differences in these
rings. These, I would assume, were probably an easier part to customize, because they could be
produced separately, I imagine. So, keep in mind that you may find a lot of different patterns
on these rings. This one has kind of a Greek
pattern, geometrical pattern to it, which actually fits really well with the Medusa head.
On the other side, as I showed earlier, we have a plain shield. So, this is probably where an
officer would have been able to engrave their initials, or perhaps have regimental symbols,
or something like that added. In this case, it's blank, and you will see many other swords that
have it blank, at least on one side. It's also true that this is the internal side. This is
the side that would be rubbing against your body, potentially, so it may be good not to have this
kind of 3D figure popping out. That might be uncomfortable, that you just have this empty
shield. Moving on to the blade. So, you can see it's not a very thick saber blade. It's rather
thin. It's also not particularly curved, so I would say not necessarily the most striking saber
blade ever. It has a spear tip, and with a central ridge. It's very faint, it's not a very pronounced
ridge here. And this runs about the way to the first third of the blade, where then we see a
one fuller develop. It's rather deep, considering that this blade isn't excessively thick. So,
considering the thickness of the blade, it's a pretty deep fuller, and it's very pronounced up
to the end. It does end in a ricasso, so it doesn't go all the way down to the connecting point to the
hilt. But this is basically what you have on the blade. Of course, newer versions of these swords
will often have nickel plated or chrome plated, but let's say in some way plated blades. So, this
could also be a sign of an older blade. Again, not a final determining clue, but circumstantial
evidence of a blade being slightly older. However, what's interesting about this blade, and I don't
know that I'll be able to make it visible on camera, because the creations are rather faded
by now, but are the rich etchings that go all the way up to, I would say, halfway up the blade-ish.
So, first of all, there is a maker's mark. I'm not sure you can really see it, but I promise that
under here, under the languid on this left side here, is the Z in a shield that's the
maker's mark of Klemen and Jung. So, a very famous sword maker from Solingen. And that is the only
maker's mark there is, in terms of there's no like dating mark on the spine, which you often have on
German swords. There's no kind of proof mark or acceptance mark. There's only the Klemen and Jung
mark, which again lends to the idea of a private purchase blade. As for the blade decorations I was
mentioning, and I hope these are visible, on the spine we have a branch with leaves that runs up,
well, quite a way. I would say at least the first third of the blade. So, you can see it here,
well, barely, I would say. This is a typical decoration you find on a lot of German swords.
We then have the remains of some lovely etchings. So, I doubt these will be easily visible because
they're even, well, actually they're more visible on camera than at the naked eye.
So, you see some geometric decorations, flowers, branches. This almost looks like some kind of,
yeah, just random
geometric patterns. Here we have an eagle under a crown. So, this is definitely, I would say,
a symbol of Imperial Germany rather than the Weimar Republic or later government.
And you see this kind of decoration keeps going up. Here we have some kind of trophy.
So, you see a drum. I can't tell if there are cannons or flags or halberds, but you would
normally find these elements together with plants and branches. Ah, there's a sword there,
I think, coming through. But yeah, a typical military kind of panoply. And as we move up,
the decorations fade out and the blade is undecorated. On the other side, not surprisingly,
we have very similar decoration patterns. Let's see if I can show you anything. So,
here we seem to have, again, some kind of trophy or something. Here is what's interesting,
we have an eagle that is parallel to the blade instead of perpendicular. So, it's not sitting
vertically on the blade, but it's like running this way. So, there, I don't know if you can
see it, that's the eagle's head here with spread wings. And there's a motto under here that,
when I told you before that this is definitely not an Ottoman sword, it's because of this
motto. It's a Prussian motto, actually, dating since 1813, and it was in use for quite a long
time in German armed forces. And this motto is Mit Gott für König und Vaterland. So,
that would mean with God for the king and country, basically. The only thing you can
currently read here is Mit Gott für, and we can't really read anything else because it's kind of
covered by the only area of heavy pitting on the blade. And then we have more floral decoration,
another panoply, military panoply here, and off we go. So, the tip was the tip I had bent back into
shape. So, you'll see it's not perfectly bent, but I consider this a satisfactory result.
You'll see there's no serious damage to the blade, except for here, perhaps, where the
patination, the natural patination, may have been slightly removed in a couple of points.
But I consider that an acceptable price for having straightened out the blade, which was
considerably bent. So, I hope you enjoyed this sword. It's really a looker. This is going to
look amazing on anyone's mantle or on the wall, because it's really a very, very beautiful sword.
But I do understand that if you're more into swords used for combat or in war, rather than
to look fancy, this may not necessarily be your cup of tea. In any case, I hope you'll join me
for the next sword video. So, thank you for watching. Bye!
