केवल एक Push Button से Motor को ON OFF कैसे करे @ElectricalTechnician

Electrical Technician
42 followers
3 Video Views·Dec 5, 2024
Friends, if I tell you that to
switch on and
off this contactor, you have to use only a single push button
and with the help of a single push button,
you make the complete circuit and
show me, then you will directly say here that
Sir, this will not be possible at all, why will it
not be possible because to
switch on and off the contractor, a
start push button and a stop push button have to be
used, through a start push
button. The contactor will start
but if we have to close the contactor by pressing it then it will
not be able to close because the push button is of
ANO type and the push button of ANO type will
not break the circuit.
To break the pay holding circuit here, we will have to
use the pay stop push button. So
sir, what you are saying is that
switching on and off the contactor through a single push button is
not at all possible, but friends, I will tell you.
Here Let me tell you that this push button is there,
we can turn it on and off through this push button,
but for this we will have to
use another electrical device
and that electrical device
is ours, see in the company, if we do not need it somewhere.
For example, if I tell you
that if you have to use so many push buttons
and
all these push buttons will turn the contactor on
and off, then you should
use this device. I am
not talking about just a push button. What I am doing
here is that we will turn it on as well as turn it off, in the
same way, this
push button here, if you press it, it will turn on, if you
press this, it will turn off, if you press this, it will turn on, then it will
turn off, if you
press this, it will turn on. Off, on pressing it,
on and off means that I will
turn it on and off with all the push buttons here.
Let me explain to you how to do it.
See, for this, you will
have to connect this device here and it will take a lot of time to connect. It is much
simpler if you If you look at this relay,
above it there is a1 terminal,
here there is a2 terminal, you have to supply power on these two terminals, just as
you supply power to the contractor, to
operate, supply power to it in the same way.
We will have to provide it,
but I will explain to you how the power supply will be provided.
For this,
first of all,
we create the condition for starting the contractor here
at the present time. What is
happening when you press this push button? As
you will see, when I press it, this
contactor is getting switched on. Okay,
now after pressing this, the power
supply to it is going in place of that power supply.
Here we call this relay as
pulse relay, so
we will connect this relay here in place of the push button,
meaning that the push button which is connected
here, this relay will be connected in its place,
so I What do I do behind it?
On the side, two wires are connected here, I
open both these wires,
removed the input power supply and
also removed the output power supply from here,
now there is a holding circuit
wire here, we use the holding circuit wire. If there is
no need to do this, then
I will remove this also from here.
Okay, now we have only two wires left. If I
touch these two together, the
contactor will turn on. You will
see here, I will take a little disk and
show it to you. Okay, so here I have
turned it on, I will touch it, so here the
contactor is on, on removal, off, on press, on on
removal, off. Okay, so
what do we have to do now,
these two wires? We have to
connect it with the relay so that if the relay
turns on then our contactor also
turns on. What has to be done for this? We have to
install a little bit in the middle of it.
First of all I mount it here and
after mounting it on this relay. you will see
anno Which is the contact? You will see that it is
said here that the terminal number three and four
are Ano contact, so
we will use this contact, then the terminal number four
is this one, so on this I
connect this wire. And the
wire here which was going through our push button, we will
connect that wire with the terminal number three. The terminal number three
is at the bottom here, so
along with this I will connect this wire here.
Now friends, see
another wire here. There is an extra connect which is
for our holding circuit, it
needs to be used otherwise
I remove it from here, I
opened these two wires here,
removed this and after removing this also,
I tightened the wire again. Given OK, this work is
complete. Now look at our device here.
We have to provide neutral supply on the a2 terminal of this device,
so for this I
use a wire here, call this wire
a2. I connect it like this on the terminal.
Now I have connected the other end of this wire
with the neutral supply here.
Now we only have to
provide phase supply to it. To switch it on,
see here I had a push button.
I have connected two wires on the anode contact of this push button. To
save time,
now I will connect this wire
with the face supply because I have to
take the face supply and turn it on,
so here I will connect it. I loosen it a little
and after loosening it, I
tighten it, in this way now this
wire is the second wire, we have to take this wire
and we have to supply power to start this relay, so
for this this is
Which is the A1 terminal, here
we will connect this wire with this terminal in this way,
connection is complete. Now
before starting it, I would like to tell you
friends, if you want to take electrical training from us,
that too online, then for this
my Who The app is Electrical Technician App
which you will get on Play Store. By downloading that app
you will get many
courses there like Electrical
Wiring course, Motor Starter course,
PLC course, BFD course.
Apart from this, if you want to learn SCADA programming. If
yes, then its course is also available, as well
as all of you and my
favorite course, How to Read Electrical Panel
Drawing. If you want to learn how to read panel drawing, then
for this
you can also take this course there. You can join,
apart from this, I have a book for all of you
whose name is Electrician A to
Z Wiring Book. This book has been written by me,
Arun Gupta, which
is completely 180 pages long. There
is a book. In this book, I have told you the
complete circuit
diagram and theory of the wiring of BFD and how to do basic programming. Along with this, I have also given
you the information about our PLC.
If you have to do the wiring of PLC, then
how will you do the wiring?
Apart from this, whatever your starter is, whether it is
reverse forward start or delta starter,
if you want to learn through the picture diagram
or learn through this type of
diagram.
Both are available in this book as well as
in Sa, you will get the
diagram of Star Delta Starter here, apart from this you will get
reverse forward dual starter here,
apart from this you will get many more
concepts here. Which is very important for you,
so if you
want to buy the PDF of this book, then
for this you can buy it from our app Electrical
Technician App or from the
description of this video which
I have given there. I have provided the link of this book, you
can buy it directly by clicking on it. If
you want any kind of information
about our course or
about our book, then you can simply call
on this mobile number. can contact
Whatever be your query, we will solve that query.
Now let us
check this starter by turning it on once.
See, first of all I turn on the
MCB here. After turning on the MCB,
if I turn on this If I press the push button,
you will see that my contactor has started.
Now can it be turned off?
Let's check this also through this push button.
So I press it. Here
you can see it off only once.
On pressing it, it turned on, on second press
it turned off, which means that this is
our pulse relay, the job of this relay
is to turn something on or off using a pulse signal,
like first. We will press it time
means that if we give it a pulse signal for the first time, it will
turn it on and after
giving the signal for the second time, it will turn it off.
Now friends, if you want to
use multiple push buttons instead of single push button, then
also. can use
how will i use you Let me tell you,
for this we will have to switch off the MCB
and after switching off, the wire of this push button will have to be
removed,
so from here I have removed it, now the
second wire of this push button which is this
It is connected to the A1 terminal of the pulse relay. We remove it from here.
After removing it, I separate it.
Now it has no use. Now
see, I have all these push
buttons here and these of all push buttons At the back,
I have connected the anode contact here
and the input terminal of all the anode contacts, for
example, suppose the
input power supply will be given through this wire,
then the power supply will come at this point and by
looping the same power supply, all the
We will provide incoming power supply to the push button.
Now whichever push button
we press, the power supply will go to its output
terminal and on that output terminal
you will see all the wires are looped together,
meaning that the output terminal I have looped them together
and I have also looped the input terminals
here and
after this, I have removed one more wire from the first push button
through which the
signal will go to this pulse relay, then
do the wiring. It is very simple, what we have to
do
is the first wire here, we will connect this wire with the MCB here,
along with this, the
phase supply wire, we will connect this wire
with the MCB here. So
through this wire all these
We have provided incoming power supply to the push button.
Now see these push buttons. If we
press them, the output signal will
go through this wire. So, we take this wire
and take this wire to get
our pulse here. The relay is the a1 terminal of this relay,
here is the a1 terminal,
so with this terminal,
I connect this wire here like this.
Okay, so the wiring here, this
wiring is complete. here now
We have to check whether
our contactor will be able to be switched on or off through so many push buttons here or
not?
All the push buttons here are of anode contact type,
so now I switch on the MCB here.
After switching on the MCB,
if If I press this push button, the
contactor here is on, now I press this,
it has turned off, I press this, it has
turned on, now I press this, it has turned
off, I will press this, it has turned on when I
press this. be closed Now
friends, here you will ask, Sir,
why do we have to do this that we have to start it through the same push button
and turn it off through the same push button,
then see
we have such a condition in the panel for the starter for many machines.
Where
we have to switch on and off a machine from multiple places
and our condition remains that we have to
switch it on and off with a single button, for
example,
suppose there is a very big hole. and that hole There are
many doors installed in the hall. Now if
you want to switch on the entire light of the hole when you exit from any door
or when you enter from any door,
then for this you can use this
relay. You will have to use the
water pump in your house
if you want to switch it on and off from multiple places -
from the first floor to the ground floor,
from the second floor to the third floor. If you want to switch it on and
off, then you can use this relay. You
can do this and
just one button to turn it on and off. It will be used, you will
press it, the relay will turn on
due to which the contactor will turn on, again
press the same, it will turn off, on pressing this, it will
turn on and on pressing this, it will turn off.
So friends, I hope that
today's class. You must have liked this class.
Thank you very much for watching this class.
