Learn how to replace the battery in your General Motors key fob with this step-by-step guide! This tutorial works for key fobs used in many GM vehicles, including Chevrolet, GMC, and even the Honda Prologue (built by GM). Follow along to quickly and safely swap out the CR2450 battery to keep your key fob functioning like new.
In this video:
Opening the key fob case Safely removing the old CR2450 battery Proper installation of the new battery Ensuring the rubber seal and cover are secure Reassembling the key fob This guide is perfect for anyone looking to save time and money by replacing their GM key fob battery at home!
Here's a list of GM vehicles likely to utilize this type of key fob:
Chevrolet: Silverado 1500 and Silverado HD Equinox Trailblazer Blazer (including EV variants) Traverse Tahoe Suburban Malibu
GMC: Sierra 1500, Sierra HD, and Sierra Chassis Cab Yukon Canyon Acadia Terrain
This is a General Motors key.
It could be a Chevrolet, it could be a GMC, that kind of thing.
But in this case, it's a Honda because the Honda Prologue is made by General Motors.
But if it looks like this, then this process will work.
So if you have a key chain on this end, you don't have to take it off.
You can leave it on there.
And just right here on this edge, you press this button.
And what that does, you kind of press it in quite a ways.
And what it'll do is release this end cap.
And this end piece right here has a physical key on the end as well.
And if you look here, basically you want to have the emblem this way and then look
right here in this little space.
And then with this emblem up, you want to take this physical key and put it right
into that little space right there.
And then you want to pry.
So you want to kind of hold it like this without pressing the buttons on the
other side and pry up like so.
And once you get it started, you can go ahead and set this part down.
And with your hand, you just kind of open it up the rest of the way.
Like, so just kind of snaps in place.
Uh, and just make sure that the, you see this rubber seal right here, silicone
seal is in place and doesn't get dislodged or separated from this piece.
It should be flat like that.
Now we can set this side down.
Uh, now this is where the battery is located and it's a CR2450 battery.
And there's a little spring on this side.
And then there's a little catch on this side.
So what you want to do is take your finger and just push this way.
So you want to push and compress this spring on this side.
You can't really see the spring it's behind this cover.
So you just press this way, compress the spring and lift up a little bit.
You don't want to like make it go flying across the room or anything.
Uh, but once it gets past that little catch right there, uh, then it'll, you'll
be able to either just kind of dump it out really is probably the best way to do it.
Uh, and then you can see the circuit board there and it actually says GM.
Um, and then I liked the way it says CR2450, I'll let you know what battery
it is just in case you lose this battery.
All right.
So you get the new battery and you just kind of plop it in there and get it caught
under this side where the spring is.
And then you push this way, compress that spring and then press down.
And it's very important to make sure that it's underneath this little catch right
here, um, and that it's not, you know, halfway down or anything, just make
sure it's all the way down there.
Then you take this other cover with the green seal on it and you just kind of
place it here and it'll kind of line up automatically kinda.
And what you want to do is without pressing these buttons, just kind of snap
it, kind of go around, you can see where it's kind of separated there.
You want to snap it in place, go around and make sure it's all completely sealed
up, there's no gaps, there's no squeaks, there's no separation or anything.
It just kind of snaps in place.
And then you take the physical key and put it back in, make sure it snaps in
place, and then you're all finished.