Ancient Greek temple architecture: the basics

Ancient Explained - History Clearly Understood.
17 followers
15 Video Views·Dec 4, 2024
A Greek temple is a building dedicated to a god or goddess.
The temple houses a statue of that particular deity.
The earliest surviving examples of Greek temples date from about 1000 BC to 700 BC.
By about 600 BC a typical temple plan emerges and continues to thrive throughout the 6th and 5th centuries BC with minor modifications.
A typical Greek temple is built on a rectangular ground plan.
A colonnade of freestanding columns rises from a three-step base and runs along all four sides of the structure.
In this plan the columns are represented by black dots.
A temple with freestanding columns on all four sides is called a peripteral temple.
There are 6 columns on each of the shorter sides and 13 columns on each of the longer sides.
This gives an arrangement of 6 by 13 columns.
The corner columns are counted twice.
So the number of columns on the long side is double the number on the short side plus 1.
These proportions were considered the ideal.
The columns support a continuous horizontal entablature.
This gives us trabeated construction, that is, one in which horizontals are supported by verticals.
In trabeated construction, therefore, all the elements are straight, not arched or curved.
The columns and entablatures support a pitched roof.
A room called a kela lies in the center of the plan.
On this plan the thick black lines represent the outer walls of the kela.
The kela houses a statue of the deity.
The statue is flanked by columns, each side consisting of two rows of columns, one on top of the other.
The kela has two porches, a front one called a pronaos and a back one called the opisthodomos.
Each of these porches is entered through a pair of columns.
In a Greek temple, no one architectural part dominates at the expense of another.
From the outside, for instance, there is no obvious front or back. They look the same.
The building materials include limestone or marble, wood and clay.
The columns are limestone or marble.
Some columns are monolithic, that is, they are cut out of one big block of stone.
But most columns are made from separate drums.
They are placed carefully one on top of the other in diminishing diameters.
A wooden dowel in the central hole of each drum helps when adjusting the drum into place.
A layer of plaster is applied to the shaft of each column when the columns are in place.
The plaster hides the joints between the drums, making a column look monolithic.
The plaster is shaped into fluting, that is, shallow grooves alternating with narrow raised bands called fillets.
The walls of the cella can be seen behind the columns in this view.
The walls are constructed from big blocks of limestone or marble, cut evenly and smoothly.
Some of the blocks can be seen in the ruins of this cella wall.
The blocks are held in place without mortar.
Sometimes iron clamps are used to secure adjoining blocks.
The roof has wooden beams and rafters, usually covered with clay tiles.
A wooden roof is relatively light.
This means that the freestanding columns and the interior cella wall are capable of supporting the roof.
And the space between the columns does not have to be too narrow.
Columns can be labeled according to their orders or styles.
The two most common Greek orders are Doric and Ionic.
The type of order found in the exterior colonnade identifies a temple as Doric or Ionic.
There are four major differences between Doric and Ionic.
These are found in the base, the shaft, the capital and the frieze.
First, the Doric column has no base. Its shaft rests directly on the floor.
Second, the shaft of the Doric column consists of relatively plain fluting.
Third, the capital of the Doric column consists of two parts.
A bulbous circular lower stone supporting a square flat stone.
And fourth, in the Doric order, the frieze above the columns consists of alternating triglyphs and metopes.
The triglyphs are carved with vertical lines or grooves.
The metopes can contain figures painted or carved.
The figures are often shown participating in mythological exploits.
This metope shows the goddess Athena on the left, with the hero Heracles in the middle and Atlas on the far right.
The Ionic order is more decorative than the Doric in its base, shaft, capital and frieze.
First, the Ionic column has a base.
Second, the fluting and fillets on the shaft of an Ionic column end in tiny arches at the bottom and top of the shaft.
Third, the Ionic capital has fancy volutes, which look like a partly unrolled scroll.
Pattern bands with a decorative carving link the volutes.
Fourth, an Ionic frieze can have non-stop figural decoration, like this procession in honor of the goddess Athena.
In Greek art, the human figure is the most important subject, so this type of frieze is an important aesthetic and didactic addition to the building.
A typical Greek temple also has sculptural decoration in the pediment, the triangular space at the front and back of the roof, above the columns and in tablature.
The sculptural decoration usually shows events from mythology related to the temple's deity.
These sculptures were painted, as were some of the upper parts of the columns and in tablature.
So let's apply the characteristics of the typical Greek temple, the 5th century BC temple of the god Hephaistos in Athens.
We have a peripteral temple with trabeated construction in the Doric style and with a 6 by 13 arrangement of columns.
