Antique sword close-up: The Italian m.1860 Cavalry sabre (And a book giveaway)

Ancient Swords
6 followers
3 Video Views·Dec 3, 2024
The Italian m.1860 cavalry sabre is a heavy sword that begins its history just before Italian unification. So while its origin may not be "fully Italian", its service life most definitely was.
It's been a while since I've done a sword cleaning video, so today we're going to clean
not exactly a sword, but in a previous video we left the tang unfinished here.
If you remember, and if you hadn't seen the video, you might be interested in watching
it, I removed the grip, which was damaged, and we found a rather rusty tang underneath.
So this definitely needs cleaning before I actually go and close it up with a new grip.
So we're going to give it at least an initial clean, because then I'll have to figure out
what's going on underneath the pommel too, I want to figure out a way to be able to clean
there as well.
But today we're going to clean a 17th century sword tang, so join me and let's see what
happens.
Oh, and of course, let's not forget, the pieces of the grip are still intact, I have to remove
the remaining tape that was on them, but I'm not going to bore you with this part, I'll
just show you once it's clean.
What's really interesting about these is that you actually see the signs of the wire wrapping,
so I now know that this grip was originally wrapped in metal wire, and I even kind of
threw it, we can tell how thick it was and how many wraps there were, and this is going
to be really useful in hopefully reconstructing a historically accurate grip.
So let's go.
Okay, so this cleaning project definitely offers some logistic challenges.
As you can see, the location of the part we're going to clean, which is the tang, is not
the most convenient, it's not impossible to reach, but it's not the kind of sword that
you work on with a sponge and just kind of glide your way across the blade.
So what we're going to do here is use some of the trusty Autosol with a toothbrush, so
this should hopefully get at least the initial part of the job done.
Here is the remains of the grip, as you can see from our previous cleanup video, a lot
of the... you can maybe see the wood here, let's see if it's in focus, yeah, so as I
was saying, you can see the indentations on the wood, like the signs of where the metal
wire wrapped around, so this is definitely a later addition, so we can actually use it,
but as I said, I'll do this off camera to spare you the boredom.
What we're going to do now, hopefully, will be a little more interesting.
So I have my toothbrush, let's get things in focus, if we can, there we go, and get
to work.
Ah, I should have probably showed you a close-up, if I already did not from the previous video,
but this is the current state of the tang, so you can see a lot of active rust was under
there, and we definitely want to take care of that before, at least stabilize it, if
not remove it, because that might not be the easiest thing to do, especially, like the
tang itself, I'm not too worried about, I'm a little more worried about the sections between
the pommel and the pin, and between, let's say, the end of the blade here, so the hidden
sections, let's say, those I'm a little concerned about, because I can't reach them, and I don't
know to what extent they may have rusted, but we can only do what we can do, so, let's
get it in focus, hopefully.
So I'll start just with a light clean-up, like a first pass, and I'll clean it right
away to see what's up, how much that rust is holding up or not, and then we'll take
it from there.
Okay, so we'll take a quick look at the tang after this first few seconds of cleaning,
and just get a look at whether or not we still have active rust there, if so, how much there
is, and so on.
Oh, well, it's also reachable with a sponge, I think.
So, yes, it does seem reachable with a sponge.
I do not see any inscriptions or anything, just at this first cursory view.
So what I'm going to do now is change things up a little, but it seems to be doing okay.
We'll grab a sponge on the abrasive side, and I'll kind of focus on one side at a time
of the tang.
Now, obviously, this is probably heresy to any Japanese sword collector, but that rust
was active, so it's not something I was comfortable keeping.
This way.
So, I'll spare you, again, the bulk of the work here.
What I'm planning to do is continue a little bit with the sponge, with the toothbrush,
with different sides of the sponge, just kind of work my way until I'm certain there is
no more rust, active rust, and then I'll get back to you.
Okay, so after a bit of cleaning, we're currently at the stage where I think we're kind of close
to at least having removed the rust from the visible areas.
I still am a little bit not concerned.
I mean, I'll make sure oil drips down in here and up here, so at least it kind of creates
a bit of an air-free environment, but I don't know that that is the, say, perfect solution,
but it is what we can do at the moment, and here is what we have right now.
So, at the current stage, this is the tang.
Let me get it in focus.
So, yeah, I don't see a lot of active rust anymore, but it's also damp now.
Not damp, but the color from the autosol is kind of messing things up, so I'll let it
kind of sit a little before I do anything to it.
Well, we'll oil it, of course, but, yeah, I don't see any marks whatsoever,
so that is a bit of a disappointment, for sure.
What I did find, though, which seems like a mark, let's see if...
I hadn't seen it previously, but is...
This seems to be a Z, or a Zed, or a 2.
I may be imagining things, but it clearly looks like a letter or a number to me there.
So, it's special in certain angle, and it's in a position where it kind of makes sense.
It's so central there that it does seem like a mark.
I can't, for the life of me, imagine what that may be.
Another interesting thing is, perhaps you can see it up here, there were some shims,
like some little nails or little pieces of steel, I think, a little...
or iron, seemed like a little nail, driven into the...
yeah, between the tang and the hilt, so I don't know if this happened
at the point where the sword was...
I imagine it happened when the sword was being restored.
So, we'll now clean it up from the residue of Altasword that we have all over the place here.
So, quick cleanup, and then we'll get things oiled up, and we should be golden.
At least, for a bit.
I'll definitely keep this sword under observation, let's say,
just to make sure that rust doesn't form again before I decide to close the gap there.
We'll use the sponge on its clean side.
Oh, there we go, spilling oil.
Being very generous with the oil.
Sorry for the focus.
I'm being quite generous here, one, because I always overdo it with oil,
but two, I really want it to seep into the gaps,
so this is one case where I'm really not concerned at all about excessive oil use.
Pressing it into the...
into that gap there, near the hilt,
and now we're going to do the same down at the tang,
I mean, down at the pommel, so...
Let me go just kind of press that there, so excess oil drips in.
And this is... I mean, this is the best I can do without removing the peen.
Let me dry that excess off.
And I'll let it sit here a little bit, and...
Yeah, and this is phase... I'm not sure what phase this is.
Phase two.
If phase one was removing the grip, this is phase two.
It's oiling up the tang here, and cleaning it.
Phase three will be in a few weeks, or whenever the time comes,
and I see that there's no new damage forming,
then it will be time to think about the new grip.
So I hope you enjoyed this video, and I'll see you soon in the next one. Bye!
