Ferro Engines, Americas most modern V8 you’ve never heard of 162, 198, 265 and 350.5 V12

Machine Engine
3 followers
Dec 2, 2024
Today on what it’s like, super interesting sophisticated engine that you probably never heard of from a company that bit the dust over 100 years ago Ferro.  ferro was founded in Cleveland Ohio and built engines from 1902-1919 in May different cylinder configurations. Ferro would build a v8 in 1915 designed by Alanson brush super cool episode enjoy
Also happy thanksgiving
Huge thank you to the AACA Library in Hershey Pennsylvania for making this episode. Possible looking for any information that you can't find pertaining to cars that you just can't find information on the Internet. They should be the first stop when looking for information. 
Ferro Machine Foundry and Machine Company was founded by Crispin Ogilvie in either 1902 or
1903 in Cleveland, Ohio. Crispin Ogilvie was an entrepreneur by this point in time. He also ran
Hoffman Hinge and Foundry LTD. Ferro expanded rapidly building all kinds of engines for cars,
trucks, tractors, marine application, industrial application, freestanding engines to power farm
equipment, building all kinds of different cylinder configurations as the years went on.
In 1914, Cadillac would introduce a V8, which would ignite a powder keg in the automotive
industry. Companies all over would start offering V8s. Companies like Kohl,
Apperson, Will St. Clair, King, Perkins, Buda, Chevrolet, and I'm sure there's others. The goal
is to cover them all because this was the beginning of the V8 and it's interesting that it didn't
catch on at first. It took until 1955 to stay and become the engine staple it was for decades.
Ferro would get in the V8 game in 1915. They offered three versions and what's really
interesting about this engine is it's an American design. It didn't copy or adapt anything and in
my opinion it's years ahead of its time and is a work of art within itself designed by Alson P.
Brush of Brush Engineering Association in Detroit. The Ferro V8 was a monoblock design cast with both
sets of cylinders and the upper part of the crankcase as a single casting. There aren't
any studs or bolts connecting the cylinders to the crankcase. The crankshaft and camshaft are tied
to the cylinder block. The lower part of the crankcase is pressed steel and acts as an oil pan.
Servicing this engine doesn't require any special tools. The combustion chamber is cylindrical in
shape and all surfaces are machined. The valves were an overhead valve arrangement and this might
be the very first overhead valve V8 offered in America built in numbers. The overhead valve setup
did not use cages. Push rods ran outside the engine block in the valley. Detachable cylinder heads.
This engine used a single camshaft with 16 cams driven by a pair of large helical gears directly
from the crankshaft. One cam for each valve which eliminated the valve levers. Roller cam followers
were used instead. It was stated with the 16 cam engine could be timed like a four-cylinder. Heads
are held on with eight bolts, four bolts on each side. Intake manifold and water outlet pipe are
combined in a single aluminum casting. These engines used a thermosiphoning system for cooling.
The intake passages being inside the water passage which ensured good vaporization. The walls of the
temperature when the engine's running of course. The manifold slope from the center towards both
the blocks so the liquid fuel carried by the updraft carburetor located in the valley between
the two blocks of cylinders doesn't collect but flows into the cylinders. Exhaust pipes are located
on the outside of the castings. Three outlets per cylinder. Individual outlets on the end ones and
one outlet for each center cylinders. Pistons are fitted with three rings. Two near the top
that hold compression and a larger ring around the wrist pin which is double acting to retain
the wrist pin and prevent scoring of the cylinders. Forked connecting rods. One connecting rod bearing
for two connecting rods. The crankshaft rides on three main bearings. Both the main bearings and
crankshaft itself is made of phosphorous bronze. Lubrication is force-fed from the gear pump in
the front of the engine which draws oil from the bottom of the crankcase and forces it through
four oil leads to the main bearings and then it gets distributed throughout the engine. Spark
plug location was also in the V valley between the banks of cylinders. The V8 was offered in three
configurations. 162 cubic inch displacement overhead valve. V8 2.655 liters. It was good
for 35 horsepower around 2500 rpm with an estimated 83 pound feet or 112 newton meters around 1800
rpm with a bore of 2.65 inches and a stroke of 3.75 inches. This engine weighed 360 pounds.
Years this engine was used was between the years of 1915 through 1919. It could be found in the
Scripps booth from 1917 in the model D or in the Scripps booth 1918 model H. Next up was the 198
cubic inch displacement overhead valve V8 3.2 liters. It was good for 48 horsepower around 2500
rpm with an estimated 110 pound feet or 149 newton meters around 1800 rpm with a bore
of 3 inches and a stroke of 3.5 inches. This engine weighed 428 pounds. Years this engine was
used was between 1915 through 1919. It could be found in the 1916 Visco as well as the Jackson
Wolverine from 1917 through 1918. The biggest V8 Ferro ever made was 265 cubic inch displacement
overhead valve V8 4.3 liters. It's important to note that information on this version is very
limited and it's different than the other two. 60 horsepower 2500 rpm with an estimated 135
pound feet or 183 newton meters around 1800 rpm with a bore of 3.25 inches and a stroke of 4
inches. The engine weighed 487 pounds. With the success of their V8, Ferro would build a V12
cast the same way as the V8. Cylinder blocks and top of the crankcase as one single casting. Pistons
were grouped in three and what looks to be water passages between the groups of three cylinders.
Information and cars or application of this engine is very sparse so if anybody has any information
can you please fill in the gaps in the comment section below. Super interesting concept nonetheless.
The 12 also utilized overhead valve exhaust manifolds are on the outside of the motor.
Valve tappet adjustment at the top of the cylinder head just like on the V8. The V12 design
also used cams to open and close the valves. There wasn't any rocker arms between the cam
and used roller valve lifters. The crankshaft is perfectly counterbalanced. Full pressure feed
lubricated. 350 cubic inch displacement overhead valve V12 5.7 liters. It was good for 80 horsepower
around 2500 rpm with an estimated 175 pound feet or 237 newton meters around 1800 rpm with a bore
of 2.875 inches in a stroke of 4.5 inches. Compression was 10.1 to 1. This engine weighed
about 730 pounds. Years this engine was produced was between 1916 through 1919. I couldn't find
any application that was used for it. If you know what this engine was in can you please put it in
the comment section because it's a total head scratcher. Unfortunately Ferro would end up going
bankrupt in 1919 and these engines would unfortunately get lost to time. Am I the only one
that is amazed at these concepts that they existed back in 1915 and they didn't really
get copied. The overhead valve didn't really become a staple until the mid 1950s. It's all
super interesting when you look back at all the different ideas that never really caught on or
took forever to catch on. Huge thank you to the AACA library for making this episode possible and I
kid you not if you're looking for lost and forgotten information they probably have it and they should
be your first stop when looking for information. Get this you don't have to be an AACA member to
go there. I will link their address in the description better yet up on the screen. There's
is what the place looks like. It's absolutely amazing there. The staff that works there are
super knowledgeable about where the information is. It's a place of wealth of forgotten or unknown
knowledge. Paint colors, wiring diagrams, anything that you can think of that pertains to the
automobile can be found at the AACA library in Hershey Pennsylvania. But the bigger question is
which one would you rather have 1917 Jackson Wolverine or 1916 Scripps Booth or 1916 Fisco?
I'm going to leave this here for a minute if you need more time feel free pause the video.
Now it's time for name that tune. First person to get both the name of the band and the song title
don't worry I'm not going to sing it today will have their comment pinned to the top of the comment
section. Thank you all so much for coming out and watching this. If you'd like to get in touch with
me shoot me a comment in the comment section below or shoot me an email at what underscore
it's underscore like at yahoo.com. If you're watching this on Thanksgiving,
have a happy Thanksgiving. Until next time, toodaloo!
