Day In the Life Of A Camera Operator - Behind The Scenes with Shane Hurlbut

Studio Solution
24 followers
#Education #filmmaker #teachnic filmmaker
Hey, what's up? Good morning.
My name is Brittany. Welcome back.
Today we're on set. This is a day in the life.
That's me, Brittany.
Can somebody get me an Apple box?
Guys, we are on set for 48 hours with the Shane Hurlbut.
Guess what? I'm going to be cam-opping for him.
Today is day one, which is pre-light day.
We have condors, we have moving lights,
we have fly swatters, all to recreate a moonlight scene
from Hollywood level all the way to indie level.
We have Nanlux, we have Sony Baranos,
we have Hollyland, and we, of course, we have Condor Blue.
So with that being said,
let's just get into the first setup of the day.
All right, so this is going to be done in three stages.
We're going to rig the 2400B heads in the ballast
and get that all cabled up first.
And then we're going to go ahead
and put all the cable up the arm.
And then the very last thing we'll do
is we'll put the movers on the base of the basket.
So Nanlux made it easy. They built a four-light cage.
It has some tilt adjustments where you can tilt up and down.
But when we use the Condor,
we're going to actually use the basket
and the jib arm to tilt up and down.
And then we'll be able to pan the basket left and right.
And so those moving lights are going to really help us
in our wide shot, our night exterior shots,
where let's say you've got several hundred feet
worth of trees or mountains,
but you're not going to be able to put a light anywhere
to light those, but you want a little bit of detail.
So we'll be able to talk with our programmer
and have them dial in an exact position
where we're going to put the moving light
so that we can light a section of trees
or light a piece of a mountain.
And then we have the four 2400Bs that are going to be,
basically, it's almost an 18K Arimax output.
So that's going to backlight our entire set
that we're shooting.
Everything is running off of the Sanisette Fleets,
total battery power tow plant.
That's going to run the set for a couple of days
and it's perfect.
We can check all the levels
and we don't have to worry about balancing.
We don't have to worry about where we put the generator.
It's very quiet.
So we get all of those perks with the battery generator
and still get the light a cool set with LEDs.
So right here, we have a 12 by 20 checkered bounce.
And if you look at the fabric,
you'll notice it's made up of a bunch of different squares
that are about one foot by one foot.
And we've got what looks like bleached muslin,
unbleached muslin, some day blue,
and it looks like a little bit of 7% gray on there
on each of these individual squares.
And the idea with the multiple colors
kind of randomly organized throughout that rag
is that it's more of an organic bounce
than just a white sheet of fabric.
So the idea of all these different colors,
it's like light bouncing off like a natural setting, right?
So if we look anywhere around us,
we'll see shades of beige, brown, green, blue,
you know, a lot of different colors.
And so that's what this bounce does.
And the way that that affects skin tones
is a lot of times that white bounce will give you
like a white sort of sheen on the skin,
almost like it's reflecting off the skin.
And these different color patterns
prevent that from happening.
So it's a lot less obvious that it's being lit
by an artificial bounce.
Let's get on to the essence
of what is a wonderful moonlit scene.
That is kind of creating your backlight,
but then also moonlight is just like sunlight.
Sunlight comes in and ricochets off this ground.
That ground right now is filling me into my face.
Well, moonlight does the same thing.
So what I do is I fly large fly swatters in the air
to create moon ambience, to fill in those shadows.
And this is done with what we call a fly swatter.
So we got the Burano all rigged up
with Conor Blue accessories.
Some really cool ACs rigged this out
and I was able to kind of see how they worked with it.
But we're using a prototype Hollywood handle
and then we've got these adjustable pivot handles
for your shoulders and stuff.
We'll be able to attach a pad to the rails
whenever we need to.
And then the Burano is pretty bad IO for power distro.
So we use the Conor Blue Pro battery plate V mount,
which gave us two more D taps.
Wasn't quite enough for this setup
because we're running Prestons and a Light Ranger.
So we also added on a D tap hub,
which allowed us to attach the MDR
and run all the power distro we need
for our follow focus system.
And then we've got this kind of combination system up here.
So we have a friction arm
and then a three eights to NATO monitor mount,
which is really awesome
because we can kind of place the monitor wherever we want
and then still get that slight adjustment
for the operator, which is pretty nice.
We've got Irix primes on here.
This is the new 65.
I love the design.
I loved how they were flaring.
I also love that the diameters are all the same.
All the gears on the Iris and focus are the exact same.
So when you're putting on your Preston on this side
and getting all your gears, they fall in absolutely perfect.
And hell, I cannot wait to try these out tonight.
So you have a EVF bracket here.
And one of the biggest problems with the Burano
is that when you attach the eyepiece,
the monitor needs to be to the side like this.
But with this swivel bracket here
mounted straight into the Burano,
we're able to use it like this without the loop
and then flip it over and attach the loop on,
which really solves that problem.
Cause otherwise it's Sony's native system.
You have to unscrew out of this side bracket
and screw on a totally different piece here
to swap between loop on and loop off.
So this gives us a lot of speed and flexibility on set.
I love these cards from Angel Bird.
We've been using them on this whole production.
They work like a million bucks.
Did you know that you can record a backup
while you're shooting on the B card?
This is a thing that a lot of people don't understand.
They put an A slot and a B slot in there,
but you can actually merge those
so they're writing to two different cards.
This is huge for a lot of indie filmmakers.
A lot of times we get these corrupted cards that happen
and this really secures your shooting.
My setup on here, I have 24 headsets
so I can communicate to crane, communicate to drone.
Everyone can be on headsets.
Before I only had like 16
and I wasn't able to really have enough.
So I wanted something that was robust enough to have 24.
And the cool thing that what we do
is we hook this all up with the sound mixer too.
So he gives us a Comtech
and that goes directly into the quote unquote C channel.
So we can hear all the dialogue of the actors.
Shane's gonna be going through
some different qualities of lights
using different backlights, some hard sources,
some soft sources like a light mat
and then some like broader panel lights
like the Nanlux 650C.
And then we're gonna have our big flash water
20 by checkerboard bounce overhead
that we're gonna bounce some 2400Bs into
and then we'll kind of see what else we're doing.
And then I'm gonna come back to the monitor
and then Brittany and Brady and I are gonna discuss
the look and everything based on all this.
All right, welcome to my moonlight laboratory.
My drama is usually my key light is an exposure
and my fill is about three and a half stops down.
Everything with cinematography is emotion, right?
You read the script and you try to dive into that emotion
and then I try to do it with lighting and camera.
We are officially done with day one.
It is a wrap.
I am tired, my legs hurt, I'm cold.
I got like so many of these in my bed.
Like this is crazy, guys.
And like we have a whole nother day to go.
This was amazing.
I am moonlight gray all day now.
So if you know, you know.
Stop the press.
So before we get into day two,
which is all about cam mopping,
I wanna make sure that you guys do not miss out
on the masterclass.
Make sure that you go on filmmakersacademy.com,
that you sign up and you can watch it online
using my code, which is gonna be in the description below.
And they have the period from the 26th to January 9th.
So please do not miss it.
Definitely check it out.
It is the perfect time
so you can start your new year off right.
And I'm only showing you the behind the scenes.
So just think about what more you'll get
if you actually saw the masterclass.
All right, so back to day two.
And here is Brittany on the camera.
So it is day two.
And today's the day for all the magic to happen.
I'm gonna be on the wheels.
And I've been practicing with my little wheels.
But I'm gonna be controlling that Scorpio head over there.
And I'm nervous, it's a lot of pressure.
So we're about to get some practice in
while everybody's doing their things.
Being smooth and having finesse is key.
Yes.
Especially if you're adjusting the frame.
If you do this, if you're very jolty
when you're adjusting the frame,
then it's very obvious that you didn't land
where you wanted to land
and so you're reframing yourself.
So work on being extra smooth with starts and your stops.
When you're doing it,
think of the pan as like,
try to dedicate that to your mind
and like pans on autopilot.
So panning is just like, it just happens.
And then you control headroom with tilt.
So just pan and then adjust the tilt as you see needed.
Whenever Brittany and I are on set together,
it's all hell breaks loose.
We do nothing right and we just shit shot.
Like I got this hat, right?
Check these hats out.
I got this hat and then five minutes later she walks up
and she's like, hey, look what I got.
I got the hat first.
Which is really her being like, I wanna be you.
First of all, this hat is actually dope.
First of all.
Like we're really siblings.
We're siblings.
Yeah, you just have a different hat.
So you're a little lighter.
That's what I've been saying.
I'll tell everybody.
That's crazy.
That's why I'm short.
Because that's my mom.
Have you guys built a 10 inch speed rail before?
When we have our final tent shape,
it looks nice and sexy.
Check it out for the failure here.
The top rag is a 20 by 20.
We have two 12 by 20s on either side,
12 by in the middle and eight by eight.
The reason why we make these bigger
than what we need to make them is so that way,
when we put a light in
or we're putting a set deck or anything like that,
if they turn the camera any direction,
we don't just see a solid.
It looks like it's nighttime.
It looks like it's outside.
So that way, also, if we're looking through that door,
we can't put a light,
you can't see the light in the door.
So the light's gonna come off to the side.
So if we make it too small, you'll see everything.
It kind of gives a little bit of working room.
You push it back.
Yeah.
I am looking for the shot list
so that I can make sure that I know my shots.
So I'm not asking the DP, what shot, what's the shot?
I know my shots.
I'm studying my shots.
So then when we go in there,
I know exactly what I need to do.
We're gonna be pushing in like this.
All of a sudden, you see that door.
So that door will, the handle goes.
Then you go up to the switch.
He flicks it.
Then the door opens.
We get a flare from her.
And then he grabs the shovel.
And then he comes in.
And we kind of let him go.
I'm gonna do that one.
Is this, Shane, is this handheld, what's?
Handheld.
Okay.
Handheld mantis.
Okay.
A fever?
They wanted me to be something I'm not.
I won't settle cause I know my worth.
That was excellent.
Great work.
Yeah.
Very nice.
Thank you.
Everything is happening right now.
Did you like it?
You're gonna be taking them around like this.
And you're gonna be pushing.
And right a little bit.
And as soon as he takes a step,
he pushes your frame left and right.
Here we go.
Cam's are rolling.
Brittany, sit.
Sit.
And three, two, one, action.
So right when he hit me, turn.
Yeah.
Right when he hits you,
you kind of come over and you like,
you know, look to that.
Yeah, exactly.
Okay.
And then you're gonna start to walk towards it.
Okay.
Let's roll camera, please.
Okay.
Mark.
All right, so we flare on action.
Everyone set?
Ready to go?
Set.
Ready, and action flare.
I did it.
I think I should've used it on you.
