Bonsai Winter Preparation In 4 Steps

Bonsai Ideas
277 followers
Nov 28, 2024
I guess there's no more denying it. It is fall, turning into winter. Now let me go through,
step by step, showing you a number of trees, what I do to get my trees prepared for winter
and into spring, so that next year they're off to a good start. And there's a few things that
you basically need to look at. Preparing your trees for winter storage is actually a four-step
approach. The first step, you clean out everything. What does this mean in practice if we say
let's clean out a tree. First of all, it is always good to remove all the old leaves that are still
on the tree. Now if we take a little bit of a closer look here at this hawthorn. Yes, that's
what it is. It's a hawthorn. You can see, of course, there's all these leaves which I'm taking
off and they're all falling on the pot and I can just remove these. But if you look a lot closer
at the trunk, you see that this is a very, very rough bark. And on the bark, I have moss growing.
Now moss in itself is not so much of a problem, except for the fact that I like this rough bark.
And the more moss is on the trunk, the quicker the bark starts to deteriorate. So it's always
good to remove the coarse moss by hand. I'm just using tweezers, but you could of course also use
a little brush. With the brush, you run the risk of brushing off parts of the bark and or smoothing
out rough bark. So I'm taking the slow root, which is with my tweezers. And once I'm done
cleaning it out with tweezers, I use an algae cleaner. It's just a regular cleaner that I can
also use to clean the street. I dilute it as on the package and I take a little brush and I brush
it over the trunk. That will reduce moss development and algae development over the next six
months. And in six months time, bring a spring again and then I'll check the tree once more.
The second step, you prune back just a little bit. There are some very long branches like this one
and it's extending too far. And I'm just going to reduce these sort of branches. Also here in the
top, the tree is really starting to grow out. And I remove all these areas that I say, okay,
I don't want this to grow out any further. But keep in mind, some trees, like this Hawthorn,
flowers on the branches of this year. So the flower buds are already in place. Therefore,
it's always wise to not prune these all that extensively in early winter, but to wait until
it has flowered in spring and then you prune them back. Now, when it comes to pruning branches,
I try to avoid making big cuts. And if I do have to make big cuts, I try to leave a little bit of
a stump and that can dry in and won't affect the tree all that much. So I'm not going to
flush. I just leave a little bit and this I can clean up in the middle of spring. Some of these
branches have gotten overly heavy. Here is a little dead portion from pruning. This I want
to remove at some point, but I think I want to go a lot deeper and I'll do that in the spring.
Here there's a knuckle. I can remove the knuckle, but once again, leave a little bit of the tree.
This tree, of course, it now has very, very nice foliage. Gorgeous color. This means the tree is
now taking all the nutrients that are in the leaves, particularly the chlorophyll, and they
are taking it back into the plant. That is what in fact causes this discoloration of the crown,
the absence of chlorophyll. Normally chlorophyll would reflect the green light, would take up the
red light. Now, without any chlorophyll, the red light is reflected and there's no green to reflect
because there's no chlorophyll. That's why there are red. So the tree doesn't actually make the
red in full. It's always there. It's just one of the colors in the leaf. When do you do these
activities? What is fall when it comes to a plant? This zelkova shows exactly what the optimal time
is. The leaves still have a little bit of green in them, but they are starting to fall naturally.
Most of the leaves are yellowing or brown. This is a stage in which the plant is very,
very active. It is growing roots. It is stabling the branches by hardening and lignifying them.
So if we now change the position of branches, they will establish quite easily and over the
course of winter they will really set in place. The third step, you wire out the tree. Right now
the branches are still full of moisture because they were, until a few weeks ago, actively growing.
So right now they're still pliable. They are not as brittle as they are in the middle of winter
and applying wire now will put them in place. And over winter, as these branches harden further,
they will set so that in the middle of spring you can unwire and they will stay in place.
Don't make branches that are too extreme. In the middle of winter these can still get damaged.
Now this Japanese maple I already pruned a little bit ago. Now the foliage is also almost
falling off completely. And this is one of those trees where pruning and wiring in full is really,
really a great idea. The young branches haven't hardened yet completely and by just wiring them
out now I use the fact that they're still full of water, full of moisture. They're still relocating
resources and with that I get branches to settle over winter and in early spring, around or just
after the first brush, I'll unwire them again and then these branches have set. Really, really cool.
There's a lot of wire to be applied because if you look at a branch like this, this has gone up a
little bit and I really want it to be horizontal. Similar to these they need to come down and
there's still a little bit of pruning to do. Now the nice thing about Japanese maple is of course
that it doesn't have a corky bark and therefore you can quite easily leave moss growing up for
a longer time. The moss does however attract all sorts of insects and the insects in itself are
chased again by the birds. You can hear the birds in the background in my videos all the time and
they dig up whatever is in the pot. Anyway, as we are still within the frame of the last four or six
weeks of the trees dropping their leaves, I can still wire out my Japanese maple. There is a slight
risk with Japanese maple wiring in full and that is if you wire too tightly that you get more easily
scarring on the branches. On the other hand, the branches are now nice and flexible. You can still
move them in all sorts of angles as you can tell and therefore you can do a very, very precise
styling if you wanted to. During the pruning back what you'll find is that there are spots like this
one. There's a side branch here and there's the main continuation branch and here at the base there
are little branches that have formed. This is a very, very good sign it's back budding but it also
means that your tree gets too many branches on one spot. So I rub off all the buds that I don't need.
This one I'm going to leave because it might be a nice side branch. This one I'm going to leave as
well because here I can actually use a side branch but all these knuckles where there's multiple
branches I remove. Similarly here you see there's a three-way split and I have two options for a
three-way split. I can either remove one of the side branches or I can remove the middle branch.
Now in this case this is actually not a self-evident choice because these side branches are actually
long enough to take over from the continuation but the angle they're both at almost 90 degrees
and that makes it less interesting. Now if I go to the back this branch sits on the front for you and
not on the back and here in the back I don't have any side branches so for me that means that this
one is going to go. At some point I might actually want to replace this branch because you can see
here this is the sort of scarring that you can get if you leave your wire on too long. I'm going to
ask you do you actually get notifications that I have new videos? If not consider subscribing to
the channel if you do like my videos. That way YouTube knows that you actually like my videos
and they spread further. Helps me in reaching more people. Also here at the base you can tell there's
lots and lots of little buds that have formed. I'm going to just rub all of these off. I don't want a
lot of inner branches here but it's a very good sign it means that this tree was open enough over
summer so that the tree decides I'm going to throw little branches on the inside. Now I often combine
the wiring and the pruning because as you remove buds and little side branches you might as well
just straight away take a piece of wire and slap it on there. Of course this is something I just
have to do for the whole tree now. Go through it, decide for individual branches. Do I like the
positioning or do I prefer to move it around a little bit. As you can see these branches are at
this point in time quite flexible and you can quite easily reposition them. Now an additional benefit
of doing this work now in late fall or early winter is that the tree is now pruned back. It
is wired out and if you just put it back into the bright daylight or the sun buds will start to pop
on places that didn't have buds before. The reason is quite simply you remove quite a few of the buds
on the outer perimeter. You remove some of the branches and you expose areas that are not normally
exposed to light and by pulling the branches down you change the hormonal balance in the branches.
That will lead to inner bud formation. So this will help over winter to create new buds. I think
with that this tree is also ready to go to bed. You may have noticed I'm not doing a lot here. I've
just pruned this back. This is just going to grow out quite a lot more. This also will grow out but
I really want these to be horizontal and these can grow in a more natural fashion outwards.
Eventually the aim of this tree is to be really really wide with a fat base. Now until when can
you work your tree? In fact you can always work your tree but wiring them out is best done when
they're not frozen. So I wire them out throughout winter and then the ones that I have wired out I
place in a protected spot. But as a rule of thumb until leaf drop you can quite easily wire out your
branches as long as you don't expect a lot of frost and then you can also still make quite
serious bends. If you make serious bends after maybe three four five weeks...
If you make serious bends three four five weeks after the last leaves have dropped then the tree
is going to be completely dormant and there is a risk of the branches that you wire out
dying off. This is very much species dependent. But yeah there is a slight risk. Particularly
hornbeams have a problem being wired in late fall early winter when they're already almost dormant.
The fourth step you protect the tree. I like to protect my trees against insects. Right now
there's probably quite a few eggs laid in the bark around the trunk and aphids might wake up
in early spring and start feasting on my plant. Particularly if you put it in a storage like a
shed then these might in winter feed on your plant without you knowing it and your tree comes in
comes out of winter storage a lot weaker. I usually use a normal what is it a mister and I
have a commercial product which is basically a very light oil with a bit of soap or it is just
a very heavy soap and you mix this in with water and you spray the whole tree. Now you can also
make it yourself and at the end of the video I'll link through to another video where I show you
how you can make one of these winter sprays yourself so you don't have to go for the commercial
more expensive route. But this is quite handy to not have to make it yourself right.
So normally the mixture is just a few millimeters on a liter so maybe one in a hundred or so.
All you want to do is create a little film on this tree that covers over all the oxygen. This
covers over all the eggs and therefore reduces the oxygen. Make sure you grab all the rough bark
because that really is what you want to hit. This spray works the best if it is left on
for one or two days. So this just stays inside now to dry up and then yeah it can go outside
again or you can move it directly into your storage area. Now as soon as I see buds starting
to swell what I do is I name I take some yin liquid and I dissolve it in water and I spray
the tree again. That will protect against fungal infections but at that time it is important to
cover your pot otherwise you get white residue on the pot and that's really ugly. But for now
this tree is ready for the rest of winter and yeah and this is what I just have to do with all
my trees now. Just a few more to go. And I think with that we have covered the whole range of what
to do to put your trees into storage. To first clean it up, treat it against algae, then prune
it out, then wire the tree and then spray it with an anti-insectal soap. Now if you don't know how
to make one or you can't find them, take a look at this video. That might be an interesting one
for you to see. And otherwise take a look at my last video. If you're not subscribed you can still
do that now and otherwise have a great winter and see you next time.
