How to Make Bonsai from Azalea🌸*EASY*

Bonsai Ideas
277 followers
8 Video Views·Jan 8, 2025
Hello and welcome back to another episode of Notion Bonsai and today we're going to
be making bonsai from an azalea.
Alright so this is the azalea that we're going to be working on here today and it's this
great big giant bushy shrub that you could just find in a garden centre.
I can see the label on the top of it here says Azalea japonica is a bell and I think
out of all of the flowering bonsai species azalea would probably be my favourite one
and as you can see from the little card that came with this azalea this one happens to
grow beautiful pink flowers and if I look close I can already see on it some of the
flowers are just at the very very early stages of beginning to bloom.
When working on azalea if you wish to let the tree flower and then come back and work
on it.
I don't mind not having flowers this year when I work on this particular tree.
All I would really like to do today is get this tree into a nice pot and give it a basic
shape and then the following year I can then enjoy the flowers.
And now whenever you get an azalea like this from a place like a garden centre there's
one of two possibilities that you will encounter when it's in the pot like this.
First of all you could get extremely lucky and this big shrub here could be one tree
with a single trunk in the very centre of this which is from my experience a rare case
but a very lucky case because if you have all this growth on one trunk because of all
this growth that trunk would be quite thick.
And then the second case that you'll encounter is lots of azaleas planted in the one pot
to create a bush.
So the first thing I would do is when I look at the tree in the garden centre is take it
from below eye level, lift it up, look inside and see what you have to work with.
And with this one based on what I can see above the soil level this is multiple trunks,
multiple trees in the one pot.
The tools that I will be using in this video today are some root pruning shears, chapstick,
some wire cutters, satsuki shears or twig cutters, some branch cutters, a root hook,
a root rake and some gin pliers.
Now by no means do you have to use all of these specialised tools for bonsai.
I want to try and keep my videos as easily accessible to anyone who is new to bonsai
and whenever I got started I just got by with a cheap pair of garden scissors.
Just make sure that whatever tool you do use is clean and sharp because a clean cut will
heal a lot faster than a sort of cut where the branches squash.
I would first like to remove some of the soil from the top layer of this tree as there is
a possibility that all of these trees may be connected in one trunk just below the soil
surface here.
I don't want to start pulling things before I fully know what's going on under the soil.
And now again I'm coming in with this big massive drip tray just to catch any soil that
might fall off of this.
And it's just started raining.
I'm just going to wind out this little wind cover here.
That's much better.
It rains so much here in Ireland so whenever I work on trees in the rain I just like to
put this thing up.
So without damaging the pot I'm going to see if I can get this out.
Alright that came out fairly easily and if you look really close here at the roots you
can see that azaleas have this almost spiderweb like root to them so I'm just going to take
the root hook and start to hook away at the top of the soil here.
And with working on azaleas you will inevitably tear through some of the azalea root as it's
so fine and fibrous.
But so long as we don't remove too much this tree should be okay.
Or multiple trees.
We don't know what's in here yet.
Now if you're wondering when the best time to repot an azalea is I would say to repot
them maybe every two to four years.
In Japan they like to repot azalea just after the tree has finished flowering.
You know whenever it gets into the very start of the rainy season.
But I would say to repot early spring.
You can see the roots here that's coming off of this.
They are super super fine.
So as I look inside here I think it could possibly be two quite thick trees together.
Maybe three but definitely not like the five or six trees that I previously thought when
the soil was up higher.
This is why it's important to dig away this top layer before doing anything.
And because the roots of an azalea are so fine and fibrous they can quite easily dry
out as you're working on them.
So what I like to do is keep a spray bottle quite handy so I can just mist the roots as
I work and that way they don't dry out.
Alright so there is a bit of a flex at the bottom here which tells me that there is separate
trees there.
But to really get these easily separated I'm going to need to loosen up all of this root
ball.
And I know anyways I'm probably going to be removing about this much root.
So I'm just going to take a saw and cut a cross section off of this.
I know this might look a little bit crazy but in bonsai it's okay to do things like
this.
I would probably have ended up raking away and tearing all these roots off anyway.
So by sawing through like this is really no problem.
This saves you a lot of time.
So I've got all of that removed.
It's like a slice of cake.
And you can even see here at the centre of that there's still lots of healthy fine roots
coming through the soil.
And again if you haven't seen any of my videos before or just if you need a refresher.
When you work on the roots of a tree and you're raking them like this you always want to rake
radially and outward from the trunk.
Never do I want to go and pull roots and wind them around the trunk.
And the same goes for if you're working on the bottom.
Always raking outward.
Now the fine fibrous roots will develop again but as you work on an azalea you'll start
to see these slightly bigger ones that aren't so spiderweb like.
They're the ones that we really want to keep.
I'm going to try and pull these apart now and see what we can do.
A little bit at a time.
Don't want to tear anything.
I'm just teasing it apart.
Now if it doesn't want to give yet I can just continue to rake a little bit more.
I really know they're connected down here somewhere at the base.
Now this is just how I would work on azalea.
There are some really talented expert azalea growers out there.
I think there's even societies and clubs of people that only specialize in azalea bonsai.
And some of the azaleas that they have are absolutely beautiful to look at at exhibitions.
And if any expert azalea growers are watching this video if you have any tips it would be
greatly appreciated down in the comments below.
I'm always open to different ways of doing things and new ideas in bonsai.
Still just going to keep misting this.
It's getting a little bit looser.
Let's see now.
It's really starting to loosen.
They definitely aren't connected at the base.
So now I'm just going to slowly just tease these apart gently.
This is how they're separating here.
Just breaking apart here.
Each of the trees will have plenty of roots to sustain themselves.
Alright so that's this one.
It's got plenty of roots.
And this one which I believe is actually two trees.
So I'm going to put this one aside and let's try and separate this one.
Alright.
So that's that one separated.
I was just wearing some sunglasses as I was working on the roots because as I raked at
them pieces of soil started flicking out and hitting me right in the eye.
So I would advise eye protection.
But we did get three beautiful bonsais from that big bush that we started with.
This is the first one.
It's got lots to work with up here.
The second one which has got really nice movement and a lot of foliage.
And the third one again this one has a lot of foliage.
And this one has the thickest trunk out of them all.
And it was fairly inexpensive too for that big clump that I bought.
I think it was maybe five pounds.
So about maybe five or six dollars.
Now before we repot this azalea I'm just going to give the roots a light wash to try and
loosen up some more soil.
So we've got this basin of water here.
I'm just going to give it a little swish.
And as I work on this tree and repot it I have these other two trees just sitting in
a basin of water just to keep the roots wet so they don't dry out.
It is okay to have trees sitting in water like this for a little short time.
I am just going to leave some soil in this.
I don't want to completely bare root this tree.
There is some roots here that were probably off the other tree that's just fallen off.
I would like to clean up the trunk a little from any of these just to help me determine
a front when I'm choosing a planting angle.
I'm just cutting off any of these shoots that's growing on the inside of the trunk.
It already has mesh on the bottom here for us so we don't really need to add any bonsai
mesh like we would on a ceramic pot.
But I would like to wire the tree in.
So to do that I'm taking some two millimeter aluminum bonsai wire.
And first I'm going to measure it so that we don't waste any of our wire.
Along the bottom and up the side here.
I'm just going to cut that with some of the wire cutters.
And we just flip the pot over and feed the wire up through the bottom here.
Make sure that it's nice and flat on the bottom.
And then I'm going to do the same across this way.
And now when it comes to the specific soil type that you use for growing your azalea,
I have found lots of different growers have their own special bonsai mix that they like
to use.
For planting their azaleas into.
But as a general rule, azaleas tend to like a more acidic, low pH type soil.
So planting them into something like Japanese Konuma with a mix of sphagnum moss just to
keep humidity up is a generally good mix to use.
Konuma for me isn't really easily accessible in my area.
So I have adapted and found my own soil mix that I use on all of my azaleas.
And over the last maybe three, four years, all my azaleas have done quite well in this
mix for the region that I live in.
And it is good to note that I do use a special azalea fertilizer.
This might have something to do with bringing the pH to the right level in the soil.
But my general mix is a mix of pumice, akadama, lava rock.
And then I like to cut up sphagnum moss really finely and mix it through all of the soil.
And I find azaleas are quite happy in that.
I'm going to get the soil mix into this little pot and I'm just going to make a small batch
in the pot as I do it.
In goes my nice bonsai soil mix.
And here I've got my sphagnum moss which I'm going to cut up.
And I have found for all trees, sphagnum moss is just a fantastic stuff to mix in with your
soil.
And I can just mix it in here with my metal chopstick.
I would say that's pretty evenly distributed in this pot.
Now I'm going to come in with this little azalea.
I would like to bury it a bit so I'm just going to shimmy it down in the pot.
Fold it over.
Then I'm going to twist the wire to anchor the tree in the pot and push the wire down.
Some people like to cut the wire here, most of the time I don't as I like to easily unwind
it.
And because this tree isn't really going into an exhibition or anything like that, I don't
really need to worry about its current presentation.
Now again with these other two pieces of wire, I'm just going to cross them over.
And then on top of that, a little bit more soil.
It's important that you give azaleas a good deep pot like this one here.
If you were to try and squeeze this into a little small pot, I have found azaleas generally
don't like to be in really compactified small pots.
Just going to work out the air gaps here now with this chopstick.
I'm pretty happy with how this is looking.
And now I'm going to do the exact same type of repot on the other two trees.
And now here is the three trees fully repotted into some fresh bonsai soil.
With these two here, because they were quite thin and small, I felt they were okay to put
into a little bonsai training pot.
But with this one here, I didn't really want to try and squeeze it into a little tiny training
pot, so I put it into a much larger pot.
But because we did remove so much root off of these trees today, I'm now going to prune
the top of the tree in order to balance the vigor between the roots and the foliage.
I determined this as the front and another possible front could be this side.
Front of a bonsai is mostly down to personal preference, but there are a few guidelines
we can follow when it comes to determining the front.
First of all, which side of the tree has the thickest root flare.
This one is mostly the same thickness the whole way around.
Then I like to look at what is the most interesting trunk line.
And I felt that here is, because if you look at the tree from this side, you can't really
see the nice split that's going on here.
And I feel that this middle branch here is getting in the way of this nice split in the
trunk.
Alright.
Yeah, I think that definitely opens it up a little.
You can definitely see through it more.
That will allow light into these lower areas to help them develop.
I don't like to use cut putty on azaleas.
I find they don't really need it.
But if you wish to, you can.
I'm thinking how can I reduce the tree to this height so that in the future it'll back
bud and we can get it even lower maybe.
And that's one design option.
Another design option could be to leave it as this nice, elegant, slender trunk line
where the soft lines are the design of the tree.
Not every tree has to be thick trunk, good taper.
Sometimes in bonsai, this could be what you're looking for.
So when pruning on the azalea, I like to keep some leaves on the branch that I prune just
so the sap still flows up.
And whenever you prune an azalea, you want each branch to split into two branches.
You can see once it gets to here, it splits so many times.
There's one, two, three, four, five.
And what I would like it to do is come up and just split into two.
So here's how we do that.
We just remove the ones we don't think we need.
So now as you can see, that branch comes up and splits into two.
And that's the principle of pruning that I'm going to use all over this tree and the other
trees.
On these here also, I could just take off the flower heads.
I know it's quite sad doing that this time of year because azaleas have quite beautiful
flowers but it is for the health of the tree and we will get flowers next year.
This one comes up, it's got a side branch, not too worried about that.
It does split here so one goes here which is this tiny one and then this other one is
quite long.
Yeah, that little one is the new leader of that branch.
I'll keep some flowers on it this year so I'll let them grow and I can prune it hard
here next year.
If I ever come to the scenario where there's three branches and one of them branches is
way stronger than the other two, I'll prune back to the two weakest ones.
That way the growth is denser.
That is all I've taken off of it.
It's quite a lot of foliage but I feel like this tree will do quite well now, not having
to feed so much foliage.
So this is tree number two and I have determined this as the front for this tree.
When planting it, I did see the tree had sort of a bend in it, a curve in the trunk and
I contemplated planting it at that angle and having this as the front to accentuate that
curve bend but when looking at the trunk line, you can't really see that beautiful silhouette
that you can see from this side and although it does bellow forward towards the viewer,
I think I'm going to wire these branches back like this to really open up the tree and show
it all off.
Then this branch could probably fill that gap.
There really is a lot to work with on this tree and I'm not going to prune this tree
back as hard as I did the last one so first thing I'm going to do is get some wire on
this.
Azaleas don't really like to be super strong wired.
It can look a little bit unnatural.
I've got a really good example of an unnaturally wired azalea that I did when I was just learning.
It's very leggy in growth, this tree.
All the leaves are only at the ends of the branches.
So I'll probably give this a little trim now but you can see here where I wired it before
I wired the branch up and it looks kind of strange having this bend on it plus this one
here.
There is a nasty cut on this side which I covered with cut putty and now thinking about
it, azaleas don't really need that.
Look at that.
I think that'll do quite fine.
It's healing over itself.
Anyways, my idea is to remove this branch entirely and then for the taper I'm going
to cut it at an angle and now this will be the trunk line of the tree.
I think it looks a lot better.
I'll come back a different day and prune this leggy foliage but I'm going to just move on
to the next tree.
So I just grabbed a little piece of scrap wire.
This is 2.5mm aluminium bonsai wire and I'm going to use that just to wire these branches
up a little.
Again, the two branch principle.
I'm going to use one piece of wire and wire these two branches together, anchoring each
branch to the other.
I'm going to just come around.
Careful not to crush any of these new shoots that's developing.
Very delicate.
Azaleas have quite soft bark too so you want to be careful with that.
Then I'm going to come around this trunk.
I'm just going to bend this slightly up.
Be very careful with these branches because if you bend azalea branches too far they will
just snap on you and that's no good and if they do you can find a different design and
style for your tree but it would be really nice if it didn't snap.
I'm going to remove this branch here at the front as it just sort of feels like it's at
the wrong place and this tree would make a much better style as a twin trunk.
If you wish to keep it you can but I felt like that didn't really need that and that
looks so much better.
I can actually pull these together a little.
So I've straightened the trunks as much as I would like to now.
Just sort of going to give it a profile cut so anywhere that I feel is too high is going
to get in the profile cut so like up here almost like just a silhouette cut.
The shape I'm going for is this sort of dome shape so here it's a little bit too much.
Could that be wired down?
That's another idea.
Maybe in the future.
I'm going to leave it at that.
I think that's quite a lot of pruning for this little tree and we are going to get flowers
on this one this year so when it does flower I'll post it on Instagram so you guys can
see the beautiful pink flowers.
And if you don't follow me on Instagram it's just at Notion Bonsai.
Alright let's move on to the third and final tree.
So as you can see with this final tree it is really congested.
It's got a lot of foliage on the top here which isn't necessarily a bad thing.
You could leave this and maybe all of this foliage would stay alive and healthy because
this particular tree did have quite a lot of roots down at the bottom here.
But just for structural reasons I would like to come in and just prune all of these branches
so that each of the branches then splits into two at the ends.
And I would like to keep these little bottom back buds of the azalea as whenever I prune
the top of this tree more light is going to be able to reach the inside.
I'm going to keep this one but I think the only one I could take out is this one because
it's growing sort of inwards towards everything so that one would probably be the only exception.
And there's just a few branches at the back here that are leaning down and they don't
really go with that sort of formal upright trunk style and I think they need to go.
So that's that one gone.
So we're almost there with the design now.
There's just this final back branch here.
So now if you look at the structure you can see here where we had removed them two branches
at the back.
There's only one branch that I think looks still a little bit strange would be this one
in the front here.
Yeah I'm going to remove this branch because it is going to come off eventually.
It is growing from a weird spot.
So why not take it off when we can.
And now on second thoughts I think with this tree I'm going to do something quite drastic
but I think in the long run will be very good for this tree.
And because I know that azaleas back bod extremely well even if you prune them back to a branch
with no foliage I'm just going to prune this tree in a profile cut to about this height
and leaving just a few pieces of foliage on this tree and taking off the majority of this.
I'm just going to wire this branch now up just to fill out the silhouette.
I'm going to anchor it to this branch so I'm firstly going to come around this way.
So now I can just position this branch how I like it.
Maybe pulling it forward a little.
Got to be very careful with azalea branches because they do have a tendency to crack and
snap so it's just very small movements.
I think for now that's pretty good.
Although we did hard prune this I think this tree is going to be just fine.
There's just a little bit on top here that we could remove.
Maybe reducing it down to about here.
Yeah I'm very happy with that.
So I hope that with each of these trees I was able to give you a slightly different
way of approaching trees depending on how you want them to look.
And all that's left to do now is give these trees a water.
And now as a bonus part of this video I'm going to be showing you how you can propagate
your very own azalea bonsai from the trees that we just worked on.
So as we were working here I collected a big bowl of a bunch of the little stems and pieces
that we cut off all of the trees and we're going to turn these into entirely new trees
really easily.
Out of all the species of trees that I have worked on I would say azaleas would be one
of the easiest to root from a cutting.
For creating really thin small mamey type azalea bonsai I would advise taking a heel
cutting and that is when you pull a branch off of a thicker branch like this.
When I pull this off here it tears and this little end here is what's known as a heel.
I'm going to just take off all of the lower leaves so we have this little stem like that.
I'm going to dip the end of it here into some water just so that it picks up some of
this hormone rooting powder and this powder will really help the azalea root a lot faster.
You can actually take a little paintbrush too and paint it up the trunk.
The rooting hormone that I'm using has the active ingredient IBA known as indole-3-butyric
acid but I've also tried other rooting hormones that you can find in a supermarket and they
also root the azalea super easily.
I've got these little soft plastic pots for making cuttings in, super cheap and affordable.
I'm just going to fill this one with some multi-purpose compost.
I have found that azaleas root really easily in that.
Now I would like this azalea to be planted right down this deep here and that's no problem.
I'm just going to put the azalea then into the soil.
Make sure that it's nice and secure in the pot so that it won't move.
Now the best time to take cuttings of azaleas is spring and summer and I would say in the
next couple of months this little azalea will root fairly quickly in this pot and you'll
have yourself a little mame bonsai.
Now let's move on to how to root it from a cutting that's a little bit thicker.
So let's pick a branch with a fairly thick trunk for this next one.
This one should do right here.
I'm going to plant this one as is but I would first like to make sure there's a nice clean
cut on the bottom so I'm going to cut straight across.
I'm going to make sure that's nice and wet and then paint on some more of that hormone
rooting powder.
Same principle with this one.
I'm going to stick it into soil.
I'm just going to say on a side note you will have a higher success rate with thinner ones
as they have more growth hormone in them but I have definitely succeeded with thicker ones
like this.
So I believe I rooted this one maybe a year ago or two years ago from a cutting and I
also rooted this one which is also quite thick.
So as you can see with these two trees it definitely is possible to root azalea from
thicker branches like these two.
Don't be discouraged if it doesn't work for you.
I would say start off with the little thinner branches and you'll have a lot higher success
rate with them but if you wish to take a risk and don't want to take the branches off of
these you can give it a go rooting it with a thicker one.
And as you can see now I have done quite a lot of azalea cuttings and I still have quite
a lot more to do but this is just an idea of how you can propagate your azalea quite
rapidly from only one parent plant.
And what I like to do is whenever I keep these in a little shaded spot every so often I just
like to mist the top and it also helps to keep the surrounding area nice and humid.
And on that I'm going to end off this video right here.
If you enjoyed the video please remember to leave a like down below it really helps out
the channel a lot and the YouTube algorithm.
And let me know what you thought of this video down in the comments and if you would like
to support the things that I do on this channel please consider hitting the thanks button
down below.
But on that thank you so very much for watching.
