Smart Home Tech That ACTUALLY Improved My Life

Smart Home Devices
120 followers
After trying out dozens of smart home devices and spending way too much money on them,
here are the ones that really make a difference.
And I'll show you how I add everything to HomeKit,
even devices that aren't compatible like this ancient AC.
This thing is around 15 years old.
It has no smart features and it doesn't connect to Wi-Fi,
but we can fix all of that with this little device here.
This is an IR blaster and the way it works is that it sends signals to the AC
by pretending that it's the remote.
And we can then control those signals via the app.
And it's not like we can only turn it on or off.
We can control everything about it like different functions,
fan speeds and even set automations.
And unlike the AC, this device can connect to Wi-Fi and therefore to my smart home.
So no matter where I am, even if I'm not home, I can control this AC.
And this works with a ton of other devices too, from TVs,
fans, cameras, audio systems, etc.
This is a huge quality of life improvement for only about $20.
But not all devices have an IR receiver and that's where smart plugs come in,
which lets you turn on or off anything you connect to it.
I use these primarily for non-smart lights and other non-smart devices like a treadmill.
This old treadmill takes like two minutes to start after I turn it on.
So I just start it remotely and it's ready to go when I get here.
But these things usually cost around $15 a piece.
So if you know you need three or four of them in the same power strip,
it's much cheaper to just get a smart power strip like this one here
that lets you control each of these slots individually.
Not to mention you save on the cost of the power strip itself.
Alright, so next up are these very inexpensive temperature and humidity sensors from Acara.
I have these around the house and there's a couple of things I do with them.
First, it gets pretty humid around here, especially in the winter.
So if it detects that humidity is higher than 70%, it'll run the dehumidifier.
I have another one that also runs the fan if it gets too hot.
And I don't have a smart fridge, so I keep one of these sensors in there,
which alerts me if the temperature rises beyond a certain point,
which either means that someone left the door open or the fridge isn't working.
These are also really useful to make sure that the automations are all running smoothly.
I can see here how when my automations kick in to stop the ACs,
the temperature drops and then at 730 AM when they get back on, it starts to climb up again.
These things are great, but one of the things that they can't measure is CO2 levels.
And that's where this air quality monitor from AWARE comes in.
I'm not an expert at all, but apparently CO2 levels are pretty bad for you
and can cause you to be sluggish and have headaches.
And turns out that I have pretty high CO2 levels where I work,
so I have an automation to run the fan whenever those levels get past 700 ppm.
When I first got this, I also placed it for a couple of days in the bedroom
and in the living room to see what kind of levels were there.
And luckily for me, they were fine, so now I just keep this upstairs for this automation.
But I also really like the way it's designed and I think it blends perfectly with my setup.
And of course, it's hard not to talk about the lights,
because like most people, they were also my first smart home purchase.
I went with Philips Hue lights around the house and to this day,
I have never had one fail on me.
They work great, my only complaint is honestly the price.
It's kinda hard to stomach this one, since they're smart lights for a fraction of the cost.
But I think you get what you pay for.
And for what it's worth, these have been 100% reliable since I got them around 4 years ago.
Next up is my robot vacuum, and this one is 5 years old,
so it doesn't have any of the cool new features that the newer models come with.
It's still useful and gets the job done, but it doesn't mop,
it doesn't have lidar so it bumps into everything,
and every now and then, I have to rescue it when it gets stuck.
I still like it and use it daily,
but in the 5 years since I've bought it, there have been some serious improvements in the space.
I'm actually in the market for a new one, but honestly,
it's just hard to even keep up with the new stuff,
because it seems like every other week, a new one comes out.
I don't think I'm gonna go with Roomba again,
since the competition seems to be light years ahead in terms of technology,
but I still need some time to research.
And if you have any suggestions, let me know in the comments.
Okay, so next up are my HomePod Minis, and take what I'm about to say with a huge grain of salt,
because I'm not an audiophile by any stretch of the imagination, but I really like these.
I think they sound great.
I'm sure they don't even come close to a dedicated Sonos system,
but to my untrained ears, they do the job pretty well.
And you can also set them as a stereo pair for your TV speakers.
Alright, so there's still a lot more to cover, but first I want to thank today's sponsor,
Tomtoc, who just sent over their 40L Navigator Travel Backpack,
and this thing truly punches above its weight with some really clever features.
For starters, unlike most backpacks where you're guessing where to stuff things,
this one has a duffel-style quick access panel that makes packing a breeze.
It has a ton of thoughtfully designed compartments,
including one that fits up to 17-inch laptops and 13-inch tablets,
all while unzipping a full 180 degrees,
which is especially useful when you need to take out your electronics at the airport.
It also comes with a luggage pass-through so you can put it through the handle of your carry-on,
and it comes with a side handle in case you want to carry it like a duffel.
It also pairs really well with their sling bag to keep your essentials within reach,
all of this while being made from durable recyclable fabric and premium YKK zippers.
At under $100, this packs tremendous value,
and Tomtoc is offering an extra 20% off for Black Friday starting November 21st.
So grab yours using the link in the description,
and thank you Tomtoc for sponsoring this video.
Okay, so next up is my security cameras, and I have a mix of Eufy and Unify.
Unify is great, especially if you already have a Unify setup,
but they don't offer a single battery-powered camera,
everything is hardwired and I can't wire this place up,
so instead, I use a couple battery-powered cameras from Eufy instead.
And these work great, the battery lasts for a really long time,
and because they connect magnetically to this base,
when the battery does run out, I can just grab it,
charge it for a couple of hours, and place it back.
The only con is that they require a base, they can't just connect directly to your network.
Other than that, I'm pretty happy with how they've held up,
I've had these for about 4 years, and they're still working fine.
Also, both Eufy and Unify record locally,
so I don't need to rely on cloud subscriptions to view my footage,
and scrubbing the timeline is super fast and responsive.
But the thing is, there's no point in having all these devices if you can't even reach them,
so having good wifi coverage in your house is essential.
Ideally, you want to have individual access points
that are wired directly to your switch or router,
but if a wired connection is not an option,
then the next best thing will be a mesh system.
These are super flexible, they can be wireless, wired, or even a mix of both.
Usually, at least one of them is hardwired,
while the others connect wirelessly to extend the signal,
and honestly, they just get the job done for 99% of people.
You can set up everything in the app, and everything is super intuitive.
I've since upgraded to a Unify system,
but it's more expensive, and not nearly as plug and play as a mesh system.
So if you just want something that works right out of the box,
and can be set up in minutes, just get a mesh system from a reliable brand.
I've never had an issue with Deco, so it's my go-to recommendation.
Okay, so I use Apple HomeKit. It's great, but it comes with two main drawbacks.
The first is that there are way less devices that are compatible with it,
as opposed to, say, Google Home or Amazon Alexa.
And the few that are compatible tend to have a higher price tag.
But there's actually two ways to fix this problem,
and add almost any device to Apple HomeKit.
The first is using HomeBridge, which, as the name implies,
simply acts as a bridge into HomeKit.
You add your devices to HomeBridge,
and then it creates a QR code for you to scan and add them to HomeKit.
It's an amazing piece of software,
and if the only thing you wish HomeKit had was more device compatibility,
then HomeBridge is all you need.
But if you want more control, more customization and automations,
while still being able to use HomeKit,
then the second option is by using Home Assistant.
Home Assistant does everything that HomeBridge does,
but it's also a full-blown home automation platform,
so you get the best of both worlds.
You get all the crazy automations and data collecting from Home Assistant,
while still having everything in HomeKit,
and being able to use Siri to control your devices.
On top of that, not having to get HomeKit-approved devices
means that you end up saving quite a bit of money on each purchase.
You can run Home Assistant or HomeBridge on anything.
An old computer you have lying around,
a Raspberry Pi, a mini PC, a NAS, anything.
And even though this might seem overwhelming, it's actually a lot of fun,
and Home Assistant is one of the most used open source projects in the world,
so there's a ton of documentation and videos to get you started.
Also, bear in mind that this is the result of around 5 years of buying stuff.
Like everyone else, I started with just a light bulb.
I also ended up returning a bunch of devices that I didn't get that much value out of,
because there's a very real diminishing returns curve here.
Once you start off, every small thing you add
is going to be a huge quality of life improvement.
But then, as you add more and more, there's more maintenance to be had,
batteries to be switched, automations to fix,
and before you know it, you might be spending 5 hours to build an automation
that will maybe save you 2 seconds.
So it really is all about finding that right balance.
With that said, I'd love to hear what automations or devices
made the biggest impact for you.
So let me know in the comments, and I'll see you in the next one.
