EVGA FTW3 2080 Ti + LattePanda Alpha = Worlds Most Powerful SBC
What's going on guys? It's CTA Prime back here again with the LattePanda Alpha and an even
beefier graphics card. Now this is the EVGA For The Win 3 Ultra RTX 2080 Ti and this is the
LattePanda. We're going to go ahead and connect this beastly graphics card to this small single
board computer and as of making this video this is the most powerful single board computer on the
market. There are more powerful boards on the way in 2019 but as of making this video the Alpha is
pretty much where it's at. Basically the EVGA For The Win 3 Ultra 2080 Ti is the best of the best
right now. They range anywhere from $1,400 to $1,700 depending on the time of month and to tell
you the truth the last car I own actually cost less than this card. I do want to give a big
shout out to EVGA for sending this over for review. I've been dying to get my hands on one just to see
what it can do and it's not going to waste. This is not going to be permanently on this board here
but since I have it in my possession I figured I might as well test it. So before I get started
here I do want to show you how I'm going to set everything up. I have a little PCIe x16 riser
adapter here. I actually had to modify it because this is a three slot card and this is only made
for a two slot GPU. It's got an x16 ribbon cable. The problem is the LattePanda Alpha can only do
PCIe x4 3.0 out using an M.2 adapter so that's what I have here and this is basically just going
plug right in. I have to add power with a mini molex to this M.2 connector and the card's not
going to be running at its full potential because we're only going to be able to do x4 3.0 instead
of x16 3.0. I'm also going to have to add power to the GPU and the LattePanda's M.2 adapter so
that's going to be handled by this EVGA 600 watt 80 plus. I've had this in two different builds. It
served me very well. It's a basic non-modular power supply. Theoretically we should get enough
power from this power supply here for the 2080 Ti because we're not powering anything else except
for the GPU. There's no CPU being powered by this thing so hopefully it'll give us enough juice and
I'll also be monitoring this with a kilowatt meter just to make sure we are delivering enough power
to this GPU. This for the win 3 actually has an overclock switch on it. I'm going to be leaving
this at stock. I don't want to overclock it just yet and I really don't think it's going to help
out because we're already really bottlenecked with this CPU. In my next test on my main system
with this 2080 Ti I will be overclocking this thing to the max. So here we are. I've got everything
plugged in. Mini Molex to that M.2 adapter on the LattePanda. Two 8 pins plugged into the 2080 Ti
and I really hope this is enough power. I will be using HDMI out of the GPU. This is a big question
I get a lot when I do external GPUs and things like that. Everybody wants to know if I'm running
HDMI out of the card. Yes I am. So I got everything connected. I'm going to go over the specs of the
LattePanda Alpha real quick and then we're going to get into some testing. I want to see what this
thing can do. If you're not familiar with the LattePanda Alpha this has an Intel Core M3 7Y30.
It's a dual core CPU with four threads at 1.6 gigahertz. One core will turbo up to 2.6 gigahertz
but most of the time both cores are sitting around 2.4 gigahertz. Out of the box these chips are
around 7 watts but I do have it configured at 15. As for RAM there's 8 gigabytes of LPDDR3. It's
non-user upgradeable and it's at 1867 megahertz. And finally the GPU. The EVGA RTX 2080 Ti for the
Win 3 Ultra. Now this has 11 gigabytes of GDDR6. It is Samsung memory. I actually haven't had much
time to mess around with this thing but I did throw it in my main PC for a few minutes and I
tell you right now that this thing is a pure monster. I can pretty much do anything 4k ultra
over 60 fps. This is a PCIe x16 3.0 card but since we're connected through the M.2 adapter
we're only at x4 3.0 so we're going to lose some performance here. I did run a quick Geekbench just
to show you guys the performance of the CPU. This doesn't test any of the GPU. Single core 3184,
multi-core 5975 and it's actually more than I thought it would be but still pairing it with
a high-end GPU like this is really going to bottleneck it. And finally for CPU performance
I ran a Cinebench R15 and we only scored a 226. By the way I have tweaked this CPU. I've set it at
15 watts in the Intel tuning utility and I've also set up the turbo time to 96 seconds so this
is pretty much the best we're going to get out of the CPU. The very first game I wanted to test was
Project Cars 2. All of these games are going to be running at 4k. We're going to see if we can hit
60 or above with the CPU and GPU combination. I do have MSAA off and post AA off mainly because
we're running at x4 on the GPU but everything else is set to ultra except for enhanced mirrors. I
turned that off. I was actually pretty impressed with the performance here. Now this is a clear day
obviously turning weather on is definitely going to impact the fps a little more. Actually a lot
more with this. Not sure if the weather is really dependent on that CPU but I did drop down to around
48 average when rain was on. This is about three laps in. Minimum 56 average 66 and a maximum of
82. This is perfectly playable at 4k. Next up Overwatch. This is a very well optimized game.
We are on epic settings. 100 resolution scale. I mean this is totally maxed out in 4k. Got a
minimum of 44 an average of around 66 by the end of this match and a maximum of 89. If I drop this
back down to ultra settings I get an average of around 75 fps and I haven't seen it dip under 60.
GTA 5 4k totally maxed out. Now the CPU just isn't going to do it with this game. I've tested
tons of different configurations even at 720p with a high-end GPU on the Latte Panda Alpha.
I can't break 60 with this game. Remember this is a dual core CPU. It does have four threads but it's
only clocked at 2.4 gigahertz as you can see. Here's Doom. 4k using Vulkan. 100 resolution scaling.
Ultra settings. You might notice there's a theme going on with all these games. The CPU is maxed
out. I mean from 96 to 100 percent on every one of these games that I've tested. I'm 100 percent sure
that if this CPU had more power even if we were using this 2080ti in an x4 slot we could get much
better performance out of all of these. Here's Battlefield 5. I've been having a lot of trouble
with this game and I think it really boils down to the CPU. I've been having a lot of crashes just in
the main menu. I'm also running this from an external drive which could play a part in it.
4k high but I can't set it to direct x12 without crashing every single time so I can't do any ray
tracing. This works perfectly fine on my other machine. It's installed on the internal SSD and
it works great but running it on the LattePanda Alpha has just been a nightmare. So there's not
a lot going on in this scene because every time there is it crashes and I can't get the recording
to recover itself so this is what I was able to record. High settings. 4k. No ray tracing on
whatsoever. We're just in a little canyon here. There's no explosions and we're averaging around
49 fps. In battle this would probably drop to around 28 because the CPU just isn't going to
keep up. I would have loved to get into battle and recorded more but it crashes right here and
I kind of just got tired of it. The final game I tested was The Witcher 3. This is 4k ultra settings.
I do have Nvidia Hairworks turned off for everybody. I'm actually surprised that the
Alpha does this well with The Witcher. We have a minimum of 30, an average of 55, and a maximum of 74.
So that's pretty much it for this video guys. I really appreciate you watching. The LattePanda
has been maxed out. I mean that's pretty much it for this thing. We can't overclock the CPU any.
We can't add any more RAM so this is the absolute best performance you're going to get out of this
thing. But I have to say it does really good for a low-powered CPU. I mean the max wattage we were
pulling out of that CPU was like 8.6 while running The Witcher 3 and overall using a kilowatt meter
at the wall we pulled 372 watts. Now most of that was definitely due to this 2080 Ti and nobody in
their right mind is going to go out and buy a GPU like this specifically for the Alpha. I did this
because I already had everything in my possession to do these tests and I enjoy doing it. Now if
you're interested in more videos like this make sure you hit that subscribe button because I got
a lot more coming. My next project will be building the world's most powerful Intel NUC.
So if you want to see something like that make sure you turn notifications on so you can stay
up to date. Really appreciate you watching. If you have any questions let me know in the comments
below. And like always, thanks for watching.

