The development of World War II tank destroyers commenced with the introduction of the M3 37mm towed anti-tank gun. Continuing to bide time until the military could develop better alternatives, the US initially integrated existing armaments with vehicle platforms such as the M6 ¾-ton truck and the M3-75 Half-Track. This progression led to the production of the Sherman-based M10 tank destroyer. Eventually, the United States designed and manufactured the M18 Hellcat almost entirely anew, though tank destroyer design culminated in the adaptation of a 90mm gun mounted on another variant of the Sherman tank, dubbed the M36 Jackson.
0:00 - M3 1:43 - M6 Gun Motor Carriage 3:06 - M3 Half track 75mm GMC 5:20 - M10 Tank Destroyer 11:55 - M18 Hellcat 15:03 - M36 Jackson
Prior to World War II, the Allies did not expect tanks to be a major factor in future wars and
paid little attention to anti-tank weapons. All of this changed with the Battle of France,
where Germany defeated France and Great Britain in only six weeks, employing blitzkrieg tactics
that combined mechanized infantry with tanks to maneuver on the battlefield faster than the
Allies could react. At the time of the Battle of France, the United States did not have a single
dedicated anti-tank weapon. We started to scramble. In the second half of 1940, we began to produce
the first examples of our first dedicated anti-tank weapon that you see here, a 37 millimeter
towed anti-tank gun. Now you don't need to be a military expert to look at this and see that this
is a weapon of very limited capability. It's not self-propelled. It fires a projectile this size.
This projectile could penetrate the armor of thin armored tanks like the Panzer III if the weapon
was close enough, but it couldn't penetrate the armor of the Panzer IV tanks of the time, for
example. And as armor on tanks continued to thicken, this weapon became virtually obsolete except for
continued use in the Pacific theater against very thinly armored Japanese tanks. When the
Japanese attacked Pearl Harbor December 7, 1941, the United States responded with a lot more energy
to improve our weapon systems, including our anti-tank weapon systems. We initially developed
two improved tank destroyers as temporary stopgap measures. The first of these two stopgap tank
destroyers is what you see here. The military refers to this as the M6 gun motor carriage. I'm
going to refer to this as the M6 tank destroyer. So the M6 tank destroyer, you can see it was just
really a kludging together of two existing components. One was the towed 37 millimeter
anti-tank gun that you see mounted in the bed of the vehicle. The second was a WC-52 three-quarter
ton weapons carrier. Initially, we tried to marry the 37 millimeter gun with a jeep. The jeep was not
stable enough to withstand the recoil. However, the three-quarter ton weapons carrier had enough beef
to manage the recoil of that gun. Now the main advantage of the M6 is the speed with which you
could deploy the weapon. As a wheeled vehicle, the M6 had a top speed on flat hard surfaces of
about 55 miles an hour, but limited capability cross-country. And secondly, the weapon itself
was designed to fire only out the back of the vehicle, not out the front of the vehicle. We
manufactured slightly more than 5,600 M6 tank destroyers during 1942 than manufactured no more.
The second tank destroyer we developed early on toward the beginning of World War II is the M375,
an example of which you see here. The military refers to this as an M3 gun motor carriage.
I'm going to refer to this as the M375 tank destroyer. Here again, we've taken existing
components and combined them together in a way that was not originally designed.
We have a French World War I 75 millimeter towed howitzer matched with an American M3 half track
turning this into that M375. So not designed to work this way. You would hate to be the driver
or in the assistant driver's seat when the gun's fired, but it had the advantage of bigger punch,
better armor penetration than the M6, and it had the advantage of better cross-country mobility
with the half track as compared with a four wheeled vehicle. This particular M375 is special.
I acquired this from World War II collector Carl Smith, who unfortunately has passed away now. But
Carl, as a number of you know, was very knowledgeable, spent decades creating his
World War II collection. And when he sold this to me, he told me this is the only surviving M375
with all original parts. Now I've not done the research to verify that that's true, but Carl
knew what he was talking about. And so I think this is really special. I have had people come
from outside the country to take measurements of my M375 to guide them on recreating their version
of an M375. We scrambled to manufacture just over 2,200 of these M375s in 1942 and early 1943. The
601st Tank Destroyer Battalion went into battle against the Germans at Al-Ghattar late March 1943
with 31 M375s and five M6s. The 601st Tank Battalion is credited with destroying 37 German
tanks in that battle, marking the first United States victory over German tanks in World War II.
The next step in the evolution of American tank destroyers in World War II was the M10
series of tank destroyer. Now the first examples of the M10 tank destroyer began to roll off
American production lines at the end of 1942, extending into 1943. And what this is, it's really
a variant on a Sherman tank. The M10 is a conversion of an M4A2 Sherman tank with diesel
Cadillac twin engines. The variant on the M10 is the M10A1. That was a conversion of the M4A3
Sherman tank with the Ford GAA gasoline engine. What you see here is an M10, not an M10A1.
The main differences between the tank destroyer and the Sherman tank are twofold.
The thickness of armor and the main gun. First, thickness of armor. We want the tank destroyer to
be faster than the tank because we want to be able to maneuver into position for a side shot
or a rear shot on German tanks where the armor is thinner. But in order to make it faster,
we've got exactly the same engine, so what are we going to do? Well, take weight off. The M10
tank destroyer weighs about 2,800 pounds less than a Sherman tank. And we got that reduction in weight
by taking the top off the turret, by making the armor thinner throughout, and by removing both
the bow gun and the ammunition for the bow gun. Altogether, that gave the M10 an advantage of
about five miles an hour faster speed compared with the M4 Sherman. We weren't sure if we were
making the right choice in making the armor so thin, so we hedged a little bit by fabricating
what are called bosses so that we had the possibility of bolting on supplemental armor
if desired. The second major difference in the tank destroyer versus the Sherman tank is the
main gun. The Sherman tank series employed the M3 75 millimeter gun. The M10 series tank destroyer
employed the M7 three-inch series of main gun. Now, the three-inch gun was originally designed
as a naval gun. And you might say, well, how come Sherman tanks didn't use a three-inch gun if this
had more armor penetrating capability? The three-inch gun was too big for the turret of an
M4 series Sherman tank. But the turret on the M10 is a modified turret. It's a five-sided turret,
open turret. It can handle the larger three-inch gun. That's the good news. The bad news is nothing
is free. And the trade-off of putting this more powerful gun in the tank destroyer is it was too
heavy for the turret. It wasn't too big for the turret, but it was too heavy for the turret. So
on any kind of slope, the turret was unbalanced and couldn't be rotated. What we did to solve
that problem is we ended up, we went through a number of proposed solutions. We finalized,
a duck build counterweight added to the rear of the turret. That counterweight weighed 3,700 pounds.
And so here we're working to make the tank destroyer as light as we can so that we can
make it as fast as we can. We've reduced the weight in the ways that I've already indicated.
And then we shoot ourselves in the foot, adding back 3,700 pounds of counterweight so that we can
rotate the turret and get the benefit of this more powerful main gun. I'd like to direct your
attention here to the counterweight attached to the rear of the turret of this M10. I didn't
realize it until I was preparing for this video. This is a fake counterweight. I don't know who
attached it when. It must have been in a restoration process somewhere along the way.
This looks like it's a counterweight, but it's really just a steel frame. No mass. It certainly
does not weigh 3,700 pounds. So this was just a cosmetic component of restoring this M10
to present to the public somewhere back along the line before I bought it. The second thing to look
at here is the turret. Unlike the Sherman tank that has a cast iron turret, here we have just
relatively thin armor plates welded together. Five-sided. A lot of room in the turret, but
very little protection from enemy fire. The last thing I want to mention about the turret is it did
not have power traverse. In order to rotate it, you had to turn a crank by hand. So this was better
than the M375 and a lot better than the M6, but still left a lot to be desired as a tank destroyer.
We were scrambling to catch up. We started way in the hole. Before we leave the M10 tank destroyer,
I want to talk about the British variant. Now this actually is a British variant of the M10
series. This is an M10C, sometimes nicknamed the Achilles version of the M10 tank destroyer.
And the difference between the M10 and the M10C is the gun. We transferred about 1,600 M10 tank
destroyers to the British under our Lend-Lease program. The British didn't like our three-inch
gun. They preferred their 17-pounder gun and rearmed most of those M10s with their 17-pounder.
With the 17-pounder installed as here, this now is an M10C. So the main difference here with the
17-pounder is it really had better penetration. It was a lighter gun. It was a thinner barrel.
It was a longer barrel. It fired around. It had more propellant. So better penetration of armor
than our three-inch gun. And yet smaller. So you see here, you can always tell,
you'll see this additional fill into the aperture of the hull because the barrel of the gun itself
is thinner. Another telltale feature is you see the muzzle brake on the end of the 17-pounder.
And missing from our version, but what should be right behind the muzzle brake is another
counterweight. So the muzzle brake, the counterweight, the installation into the
turret, all of that lets you know whether this is a 17-pounder or a three-inch. And in this case,
it is a 17-pounder. So a particularly rare version of an M10 tank destroyer.
Our next generation tank destroyer was the M18 gun motor carriage that I'm going to refer to as
the M18 Hellcat or the M18 tank destroyer, an example of which you see here. The big deal
about this is it had a top speed between 55 and 60 miles an hour. This is the only American tank
destroyer in World War II that was designed from the ground up specifically to be a tank destroyer.
All of our other tank destroyers were conversions of other vehicles. What characterizes the M18 is
first, the armor is extra thin. The thickest armor anywhere on this is only one inch or 25
millimeters thick. With that combination of thin armor, still no bow gun, still no weight of bow
gun ammunition, still an open turret, and integrated counterweight on the rear of the turret,
the M18 weighed 30,000 pounds less than an M4 series Sherman tank, giving it that tremendous
speed. This was the fastest tracked vehicle on the battlefield throughout World War II,
and in fact, the M18 Hellcat was the fastest tracked vehicle for the United States military
beginning with its introduction in 1943 until we introduced the Abrams tank in the early 1980s.
Believe it or not, in spite of all of that additional speed compared with the M4 Sherman,
the M18 Hellcat has exactly the same engine as the M4 Sherman. Both have the Continental R975
radial air-cooled engine generating 400 net horsepower. Another special feature of the M18
Hellcat is it's the very first American vehicle to use the new torsion bar suspension system
developed by the Army Ordnance Department, and what's particularly helpful about the torsion
bar suspension system is not only a smoother ride across country, particularly at higher speeds,
that the M18 Hellcat could generate, but that center guide between the dual road wheels made
it harder for the M18 to throw a track cross country at high speeds. The main gun on the M18
Hellcat was the new M1 76mm gun. What was remarkable about the M1 76mm gun is it had the
same armor penetration capability of the 3-inch naval gun on the M10 series, but was lighter
weight and was supported by power traverse rather than manual traverse of the turret. To drive home
the superiority of the M1 76mm gun, take a look at this projectile and contrast this
with the 37mm projectile we looked at earlier. We've got a serious tank destroyer here.
Michael Green, in his book American Tanks and ABFs of World War II, refers to the M18 as the
ideal tank destroyer. Steven Zaloga disagrees, but it's said that the M18 had the highest
kill to loss ratio of any American tank or tank destroyer in World War II. We manufactured
slightly more than 2,500 M18 Hellcats during 1943 and 1944. Now let's move on to the culmination
of American tank destroyers in World War II, the M36 gun motor carriage that I'm going to refer to
as the M36 Jackson or the M36 tank destroyer. The big difference here versus prior American
tank destroyers is the capabilities of the main gun. The M36 has a 90mm main gun, exactly the
gun that went into the M26 Pershing tank. The 90mm gun was able to penetrate the front armor
of most German tanks during World War II, eliminating that major handicap of having our
armor-piercing rounds bounce off the front armor of German tanks unless we've maneuvered
into position for a side shot or a rear shot. The M36 Jackson was a conversion. It wasn't designed
from the ground up to be a tank destroyer. The M36 Jackson was a conversion primarily of M10A1
tank destroyers, so it had the 4GAA gasoline engine. We also converted a few M10s with the
diesel twin Cadillac engine, and we converted a few M4A3s into M36 Jackson tank destroyers. So
a conversion, a new turret, a 90mm gun, otherwise very similar to the M10 series of tank destroyers.
The M36 Jackson entered combat for the first time in October 1944. With this powerful main gun,
it was often used as a tank instead of a tank destroyer in spite of the fact that it didn't
have a bow gun and didn't have top cover on the turret. So that concludes a review of the
improvements in American tank destroyers in World War II, and just think about it.
The War Department created our first tank destroyer command only days before the Japanese
attack on Pearl Harbor. At that point, our state-of-the-art was the 37mm towed anti-tank
gun. From there, look how quickly we added the M375 tank destroyer, the M6 tank destroyer,
the M10 series of tank destroyers, in 1943 the M18 tank destroyer, in 1944 the M36 tank destroyer.
This underscores the significance of American manufacturing and what a big deal our position
dominating global manufacturing had on American success in World War II. I'm going to talk
more about that in my next video.